Publications
International Journal
S.no | Jul 2021 - Jun 2022 | Author's Name | Journal Name | Year, Volume, Issue, Page No |
---|---|---|---|---|
1 | Impact of Cutting Parameters on Cutting Force of AISI 410 and AISI 420 MSS during CNC Dry Milling | George, P., Selvaraj, D.P., George, P. | Materials Science Forum | 2022; 1048 MSF, pp. 291-297. |
2 | Thermal Conductivity Analysis of Ethylene Glycol/H2O-Based MgFe2O4 Ferrofluid | Ajith, K., Pillai, A.S., Muthu Vijayan Enoch, I.V., Solomon, A.B. | Materials Science Forum | 2022; 1048 MSF, pp. 83-88. |
3 | Heat transport limitations and performance enhancement of anodized grooved heat pipes charged with ammonia under gravity and anti-gravity condition | Sudhan, A.L.S., Solomon, A.B., Sunder, S. | Applied Thermal Engineering | January 2022; 200, art. no. 117633. |
4 | Study on mechanical and wear behaviour of AA7075/TaC/Si3N4/Ti hybrid metal matrix composites | Pradeep Kumar, J., Robinson Smart, D.S. | International Journal of Surface Engineering and Interdisciplinary Materials Science | January 2022; 10 (1), |
5 | Experimental Analysis on a Designed and Fabricated Cost Effective Solar Pond Model | Lakshya, A.K., David, A., Sahu, M., Sinha, R.K. | Lecture Notes in Mechanical Engineering | 2022; PartF1, pp.13-22. |
6 | Stating and Deriving Bernoulli's Theorem as a Special Case of Steady Flow Energy Equation | David, A., Lakshya, A.K., Sahu, M., Sinha, R.K. | Lecture Notes in Mechanical Engineering | 2022; PartF1, pp.217-225. |
7 | Effect of confluence length on the heat transport capability of ultra-thin multiport minichannel thermosyphon | Stephen Manova, Lazarus Godson Asirvatham, Jefferson Raja Bose, Trijo Tharayil, Somchai Wongwises | Applied Thermal Engineering | January 2022; 201, Part A, 117763. |
8 | Synthesis and evaluation of mechanical of AA 6063/MgO+Flyash (Al2O3) hybrid surface composite by friction stir processing | R. Raja, Sabitha Jannet, Lenin Dallas, Aibel Sam Saju and S. Rajesh Ruban | International Journal of Materials and Product Technology | January-March 2022; 64(1), pp.69-77. |
9 | Porosity formation studies in high pressure die castings of Al-9Si-3Cu alloy based on Taguchi method | K. Ch Appa Rao, Anil Kumar Birru, Praveen Kumar Bannaravuri, E. Daniel Francis | International Journal of Structural Integrity | January 2022; 13(1), pp.78-91. |
10 | PARAMETER'S INVESTIGATION on Al2CH3CERAMIC USING LASER TURNING | Desikan, S., Govindarajulu, J., David, A., Nagarajan, B. | Surface Review and Letters | January 2022; 29 (1), art. no. 2250010, |
11 | Effect of particle damper technique on tribological properties during hard turning process | Lawrance, G., Paul, P.S., Joshwa, D., Sharvilin, S., Sudarsan, K., Arun, R. | Materials Today: Proceedings | 2022; 49(5), pp. 1281-1285. |
12 | Analysis of the blade profile of the Savonius wind turbine using computational fluid dynamics | Venkatesan S.P., Venkatesh S., Sunil Kumar M., Senthamizh Selvan S., Sai Y. | International Journal of Ambient Energy | 2022; 43 (1), pp.142-148. |
13 | Cutting Force Studies of Cast Nitrogen Alloyed Duplex Stainless Steel in Dry Turning Process | Selvaraj, D.P., Chandramohan, P., Rajesh, P.K. | Journal of Engineering Science and Technology | February 2022; 17 (1), pp. 171-179. |
14 | A hydrophobic-hydrophilic MXene/PVDF composite hollow fiber membrane with enhanced antifouling properties for seawater desalination | Zhang, T., Guo, X., Solomon, B., Sharifpur, M., Zhang, L.-Z. | Journal of Membrane Science | February 2022; 644, art. no. 120146. |
15 | Research progress on performance enhancement of heat pipes: a review | Sudhan, A.L.S., Ramachandran, K., Solomon, A.B., Jawahar, C.P. | Journal of Thermal Analysis and Calorimetry | February 2022; 147 (4), pp. 2847-2883. |
16 | Analysis of the Different Types of Electric Motors Used in Electric Vehicles | Ramya, K.C., Ramani, J.G., Sridevi, A., Rai, R.S., Shirley, D.R.A. | EAI/Springer Innovations in Communication and Computing | 2022; pp. 43-57. |
17 | Smart Charging in Electric Vehicles and Its Impact on the Evolution of Travelling | Shirley, D.R.A., Sankari, B.S., Rai, R.S., Janeera, D.A., Raj, P.A.C. | EAI/Springer Innovations in Communication and Computing | 2022; pp. 197-217. |
18 | Study on the Effect of Polyurethane-Based Magnetorheological Foam Damper on Cutting Performance during Hard Turning Process | S. Sarath, P. S. Paul, D. S. Shylu, and G. Lawrance | Smart and Sustainable Manufacturing Systems | February 2022; 6(1) pp.37-52 |
19 | Development of Static Mixer for Water Treatment and Investigation of Effect of Geometrical Parameters on Mixing Effectiveness | Denny A., Smart D.S.R., Kurissingal D.C., Kumar J.P., Smart J.J., | ARPN Journal of Engineering and Applied Sciences | February 2022; 17(3), pp.262-272. |
20 | A Novel low power 2-D to 3-D Array Priority Encoder using Split-Logic technique for Data Path Applications | Shylu Sam, D.S., Sam Paul, P., Elizah, J., Nithyasri, Snehitha, Singh, A., Vijendra | WSEAS Transactions on Systems and Control | 2022: 17(5), pp.42-49 |
21 | Electromagnetic interference shielding effectiveness of in situ-synthesized ultrafine SiC- and Al2O3-reinforced AA6061 aluminum matrix composites | Pushpa T.A.J.M., Selvam J.D.R., Dinaharan I., Peter E., | Journal of Materials Science: Materials in Electronics | March 2022; 33 (7), pp.3774-3785. |
22 | Mechanical behavior of 3D printed micro lattice material structure | R. Raja, Jebas D Gabriel, Sabitha Jannet, A Mohammed Niyas, S.J. Vijay, Rajakumar S Rai, Titus Thankachan, | Materials Today: Proceedings | 2022; 52(3), pp.944-949. |
23 | Experimental investigations and multi criteria optimization during machining of A356/WC MMCs using EDM | Singh, A., Kumar, K., Sundari, K.G., Ranjan, R., Surekha, B. | Decision Science Letters | April 2022; 11 (2), pp. 147-158. |
24 | Pradeep Kumar J., Robinson Smart D.S., Manova S., Ummal Salmaan N., Effect of TaC/Ti/Si3N4Hard Ceramics on Mechanical and Microstructural Behaviour of AA7075 Processed through Stir Casting Process", Advances in Materials Science and Engineering, 2022; 2022, art. no. 6804011. | Pradeep Kumar J., Robinson Smart D.S., Manova S., Ummal Salmaan N. | Advances in Materials Science and Engineering | 2022, art. no. 6804011. |
25 | DC-DC Converters based Integration of Grid Stability Estimation for PV Systems | Ma S., Vellimedu A.S., Purushotham S., Suresh M., Pe J., Prasad K.L., Venkatesh R., Sivaramkrishnan M., | International Conference on Sustainable Computing and Data Communication Systems, ICSCDS | 2022 - Proceedings, pp. 891 - 898. |
26 | Effect of copper-graphene hybrid nanoplatelets in a miniature loop heat pipe | Veeramachaneni, S., Pisipaty, S.K., Vedula, D.R., Solomon, A.B., Harsha, V.S. | Journal of Thermal Analysis and Calorimetry | May 2022; 147(10), pp.5985-5999. |
27 | Turbulent magnetohydrodynamic natural convection in a heat pipe-assisted cavity using disk-shaped magnesium ferrite nanoparticles | Ajith K., Aaron M.J., Pillai A.S., Enoch I.V.M., Solomon A.B., Sharifpur M., Meyer J.P. | Applied Nanoscience (Switzerland) | May 2022; 12(5), pp.1627-1641. |
28 | Palm stearin biodiesel: preparation, characterization using spectrometric techniques and the assessment of fuel properties | Cijil B. John, S. Antony Raja, B. Deepanraj & H. C. Ong | Biomass Conversion and Biorefinery | May 2022; 12(5), pp.1679-1693. |
29 | Prediction of Brake Pad Wear Using Various Machine Learning Algorithms | Steffan J.J., Jebadurai I.J., Asirvatham L.G., Manova S., Larkins J.P. | Lecture Notes in Mechanical Engineering, | 2022; pp.529-543. |
30 | Design and Development of Mechatronic System for an Automated Ergonomic Keyboard Tray | Sahu M., Rao G.B., Kumar W.M., Vijay S.J., Chrysolin A.P., Madan A.P., Jebish S., John J.J. | Lecture Notes in Mechanical Engineering | 2022; pp. 461-471. |
31 | Mechatronic System for an Automated Dynamics Staircase for Walking Difficulty People to Travel in Public Road Transportation Vehicles | Peravali M.S., Rao G.B., Bannaravuri P.K., Sahu M., Deepak D.L., Kandavalli S.R., Pulisheru K., Gorrepati S.R. | Lecture Notes in Mechanical Engineering | 2022; pp.449-460. |
32 | Design and Analysis of a Structure to Support Two Star Sensors | Rajakumar S.R., Vasanth X.A., Kantharaj I., Srinivasan R. | Lecture Notes in Mechanical Engineering | 2022; pp.485-492. |
33 | A Comparative Study on Mathematical Approaches to Determine the Time Lag and Synchrony Between Two Time", Series Data in Different Engineering Applications | Paul N.A., Rai R.S., Vijay S.J. | Lecture Notes in Mechanical Engineering | 2022; pp.281-290. |
34 | Review - A Conceptual Analysis on Ceramic Materials Used for Dental Practices: Manufacturing Techniques and Microstructure | Kandavalli S.R., Kandavalli S.R., Ruban R.S., Lo C.H., Kumar R., Elshalakany A.B., Pruncu C.I. | ECS Journal of Solid State Science and Technology, | May 2022; 11 (5), art. no. 053005. |
35 | Design, Fabrication, and Performance Analysis of Intelligent Mesoscale Capacitive Accelerometer for Vibration Measurement | Gomathi, K., Sakthivel, R., Joseph John Marshal, S., Pratheep, V.G. | Journal of Testing and Evaluation | July 2021; 49(4), pp.1-8. |
36 | Combined effects of filling ratio and wick surface coating on thermal performance of cylindrical heat pipes | Sankar, P.R.J., Venkatachalapathy, S., Asirvatham, L.G. | Heat and Mass Transfer/Waerme- und Stoffuebertragung | July 2021; 57(7), pp.1171 - 1182. |
37 | Integrity on properties of Cu-based composites with the addition of reinforcement: A review | Suman, P., Kumar Bannaravuri, P., Baburao, G., Ratna Kandavalli, S., Alam, S., Shanthiraju, M., Swamy Pulisheru, K | Materials Today: Proceedings | July 2021; 47, pp. 6609-6613. |
38 | Microstructure and mechanical characterization of Nd:YAG laser beam welded AA6061/10 wt% ZrB2 aluminum matrix composites | J. David Raja Selvam, I. Dinaharan, P.M. Mashinini | Optics and Laser Technology | August 2021; 140, 107084. |
39 | Erratum to: Comparative Study on H20 Steel Billets: Additive Manufacturing vs. Powder Metallurgy | Nasar, S., Baruch, L.J., Vijay, S.J., Srinivas, C.K., Jose, J., Popov, V.V. | Physics of Metals and Metallography | August 2021; 122 (8), p. 827. |
40 | Effect of post-reaction ultrasonic treatment on synthesis, microstructural evolution and mechanical behaviour of Al 4043/TiB2 in situ nanocomposites | S. Ramani, K. Leo Dev Wins, Jayakrishnan Nampoothiri, K. R. Ravi & D. S. Ebenezer Jacob Dhas | Arabian Journal for Science and Engineering | August 2021; 46, pp. 7521-7531. (SCIE) |
41 | Optimisation of parameters influencing cold crack resistance of SAE 950A steel | Manivelmuralidaran, V., Senthilkumar, K., Ebby, J., Prabhu, T.R. | Sadhana - Academy Proceedings in Engineering Sciences | September 2021; 46 (3), art. no. 157. |
42 | Impact on the microstructure and mechanical properties of Al-4.5Cu alloy by the addition of MoS2 | Rao, G.B., Bannaravuri, P.K., Raja, R., ...Birru, A.K., Rasalin Prince, R.M. | International Journal of Lightweight Materials and Manufacture | September 2021; 4(3), pp. 281-289. |
43 | Influence of stainless steel impact damper on tribological properties during boring process | Lawrance, G., Sam Paul, P., Ezhil, M., Ebi Ashish, J., Gokul, R., Subhash, M. | Materials Today: Proceedings | 2021; 46, pp. 107-110. |
44 | Mechanical and wear characterization of LM13/SiC/Gr dispersed hybrid composites formed through stir casting | Pradeep Kumar, J., Robinson Smart, D.S | Materials Today: Proceedings | 2021; 46, pp. 8172-8179. |
45 | Machinability, weldability and surface treatment studies of SDSS 2507 material-A review | George, P., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., George, P., Anuja Beatrice, B. | Materials Today: Proceedings, | 2021; 46, Part 17, pp. 7682-7687. |
46 | Influence of silicon nitride, hafnium carbide and molybdenum disulfide to the wear behavior of Al 7075 hybrid composites | N. U. Salmaan, S. A. Raja, D. S. Robinson Smart | Digest Journal of Nanomaterials and Biostructures | July - September 2021; 16(3), pp.959-967. |
47 | Investigation of hybrid copper surface composite synthesized via FSP | R. Raja, Sabitha Jannet, Titus Thankachan | Materials and Manufacturing Processes | September 2021; 36(12), pp.1377 - 1383. |
48 | Development of weight grader for dehusked coconut | Asha Monicka, A., Pandiarajan, T., Brusly Solomon, A., Ganapathy, S. | Agricultural Engineering International: CIGR Journal | September 2021; 23 (3), pp. 220-231. |
49 | A 10-bit 200 MS/s pipelined ADC with parallel sampling and switched op-amp sharing technique | Sam, D.S.S., Paul, P.S. | Circuit World | September 2021; 47(3), pp.274 - 283. |
50 | An experimental investigation of the air-side performance of crimped spiral fin-and-tube heat exchangers with a small tube diameter | Thawatchai Keawkamrop, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Ho Seon Ahn, Omid Mahian, Somchai Wongwises | International Journal of Heat and Mass Transfer | October 2021; 178, 121571. |
51 | Assessing suitability of commercial fibre reinforced plastic solar still for sustainable potable water production in rural India through detailed energy-exergy-economic analyses and environmental impacts | Sharon, H., Prabha, C., Vijay, R., Niyas, A.M., Gorjian, S. | Journal of Environmental Management, | October 2021; 295, art. no. 113034. |
52 | Effect of pin fin configuration on thermal performance of plate pin fin heat sinks | Kitti Nilpueng, Mehrdad Mesgarpour, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Ho Seon Ahn, Omid Mahian, Somchai Wongwises | Case Studies in Thermal Engineering | October 2021; Volume 27, 101269. |
53 | Comprehensive case study on heat transfer enhancement using micro pore metal foams: From solar collectors to thermo electric generator applications | Jefferson RajaBose, Stephen Manova, Lazarus Godson Asirvatham, Somchai Wongwises | Case Studies in Thermal Engineering | October 2021; Volume 27, 101333. |
54 | Effect of coated mesh wick on the performance of cylindrical heat pipe using graphite nanofluids | Jyothi Sankar, P.R., Venkatachalapathy, S., Asirvatham, L.G., Wongwises, S. | Journal of Thermal Analysis and Calorimetry | October 2021; 146 (1), pp.297 - 309. |
55 | Experimental investigations of aisi 410 and aisi 420 martensitic stainless steel in cnc dry milling operation | George, P., Philip Selvaraj, D | International Review of Mechanical Engineering | October 2021; 15 (5), pp. 237-243. |
56 | Investigation of particle damper on tool vibration during boring process | Lawrance, G., Sam Paul, P., Moses Jan, N., Stan Pravin, S. | Materials Today: Proceedings | 2021; 47, pp. 4696-4699. |
57 | A review on polymer matrix composite materials and their applications | Sajan, S., Philip Selvaraj, D. | Materials Today: Proceedings | 2021; 47, pp. 5493-5498. |
58 | Effect of machining parameters on cutting force during dry milling of 2205 DSS and 2507 SDSS materials | George, P., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., George, P., Anuja Beatrice, B. | Materials Today: Proceedings | 2021; 47, pp. 6614-6617. |
59 | Influence of B4C and TiB2nanoparticles in tungsten inert gas weldment: The development of nanocomposite filler re-melt behaviour for joint strength enhancement | Ramani, S., Leo Dev Wins, K., Ebenezer Jacob Dhas, D.S., Anuja Beatrice, B. | Materials Today: Proceedings | 2021; 47, pp. 6783-6788. |
60 | Effect of the non-electrically conductive spindle on the viscosity measurements of nanofluids subjected to the magnetic field | Ajith, K., Pillai, A.S., Muthu Vijayan Enoch, I.V., Sharifpur, M., Solomon, A.B., Meyer, J.P. | Colloids and Surfaces A: Physicochemical and Engineering Aspects | November 2021; 628, art. no. 127252. |
61 | A Study on Recent Developments in Jute, Cotton, Coir, Silk and Abaca Fiber-reinforced Composites | Kurien, R.A., Santhosh, A., Paul, D., Kurup, G.B., Reji, G.S., Selvaraj, D.P. | Lecture Notes in Mechanical Engineering | 2021; pp. 375-384. |
62 | Application of environment-friendly refrigerants in anodized grooved thermosyphon at high heat loads | Sudhan, A.L.S., Solomon, A.B., Ramachandran, K., Jawahar, C.P. | Materials Today: Proceedings | 2021; 46, pp. 138-140. |
63 | Comparative study on the heat transfer performance of micro-grooved anodized thermosyphon with R134a, R600a and R717 for low-temperature applications | Sudhan, A.L.S., Solomon, A.B., Immanuel, I.D. | Journal of Mechanical Science and Technology | November 2021; 35(11), pp.1-11. |
64 | A novel study and research on multilayer alas/gaas quantum dot inner layer for solar cell applications | Du John, H.V., Moni, D.J., Rubesh, G.P | International Journal of Computer Aided Engineering and Technology | 2021; 15 (2-3), pp. 243-256. |
65 | Iot based prognostics using mems sensor with single board computers for rotary machines | Vasanth, A., Paul P.S.,Shylu, D.S., Paul, P.M. | Przeglad Elektrotechniczny | November 2021; 97 (11), pp. 170-174. |
66 | Heat transfer enhancement in an modified cylindrical thermosyphon using environmental friendly refrigerant water | Anand, R.S., Jawahar, C.P., Solomon, A.B., Sharifpur, M. | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | December 2021; 43(23), pp.3101 - 3118. |
67 | Characterization of flat miniature loop heat pipe using water and methanol at different inclinations | Veeramachaneni, S., Pisipaty, S.K., Vedula, D.R., Solomon, A.B. | Experimental Heat Transfer | December 2021; 34 (7), pp. 639-661. |
68 | Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM) | Ragupathy, K., Velmurugan, C., Ebenezer Jacob Dhas, D.S., Senthilkumar, N., Leo Dev Wins, K. | Arabian Journal for Science and Engineering | December 2021; 46 (12), pp. 12045-12063. |
69 | A novel method to improve the critical damage parameter of powder metallurgical components during the cold upsetting | Tharmaraj, R., Davidson, M.J., Raja, R. | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | December 2021; 235 (6), pp. 1820-1834. |
70 | Optimization of cutting parameters of martensitic stainless steel grades aisi 410 and AISI 420 during CNC dry milling | George, P., Selvaraj, D.P. | Journal of Engineering Science and Technology | December 2021;16 (6), pp. 4369-4382. |
71 | Thermal modeling, characterization, and enviro-economic investigations on inclined felt sheet solar distiller for seawater desalination | Hilarydoss, S., Delhiraja, K., Reddy, K.S., Philip, L., Chand, D., Benny, B. | Environmental Science and Pollution Research | December 2021; 28 (45), pp. 63572-63588. |
72 | Effect of sphere configurated particle damper on tribological properties during boring of hardened steel | Gunaraj, L., Paul, S., Dhas, E.J. | International Journal of Modern Manufacturing Technologies | July-December 2021; 13 (2), pp. 21-33. |
73 | Study on the Influence of Silicone-Based Magnetorheological Elastomer on Tool Vibration During Turning of Hardened SS410 Steel | Vasanth, X. & Paul, Sam & Lawrance, G. | Journal of Advanced Manufacturing Systems | December 2021; 20(4), pp.729-746. |
74 | Analysis of hybrid aluminium composite material reinforced with Ti and NbC nanoparticles processed through stir casting | Joslin Vijaya D., Pradeep Kumar J., Robinson Smart D.S. | Materials Today: Proceedings | 2022; 51, pp. 561 - 570. |
S.no | Jul 2020 - Jun 2021 | Author's Name | Journal Name | Year, Volume, Issue, Page No |
---|---|---|---|---|
1 | Investigation and optimization of parameters for hard turning of OHNS steel | Jafrey Daniel James Dhilip, J. Jeevan, D. Arulkirubakaran and M. Ramesh | Materials and Manufacturing Processes | July 2020; 35(10), pp.1113-1119. |
2 | Feasibility of glycerin/Al2O3 nanofluid for automotive cooling applications | Kondru Gnana Sundari, Lazarus Godson Asirvatham, Joseph John Marshal, Emerald Ninolin, Surekha B | Journal of Thermal Engineering | July 2020; 6 (4), pp:619-632 |
3 | Thermal performance enhancement studies using graphite nanofluid for heat transfer applications | P.R. Jyothi Sankar, S. Venkatachalapathy, Lazarus G. Asirvatham | Heat Transfer | July 2020; 49(5), pp.3013-3029 |
4 | Effect of nano cupric oxide coating on the forced convection performance of a mixed-mode flat plate solar dryer | Sivakumar, S., Velmurugan, C., Dhas, D.S.E.J., Solomon, A.B., Dev Wins, K.L | Renewable Energy | August 2020; 155, pp.1165-1172 |
5 | Dynamics of rising bubbles in gradually mixing fluids due to the effect of Rayleigh–Taylor instability | Nimmagadda, R., Asirvatham, L.G., Reddy, S.R | International Journal of Multiphase Flow | August 2020; 129, 103288. |
6 | Dynamics of rising bubbles in gradually mixing fluids due to the effect of Rayleigh–Taylor instability | Nimmagadda, R., Asirvatham, L.G., Reddy, S.R. | International Journal of Multiphase Flow | August 2020; 129, 103288 |
7 | Effect of Magnetic Field on the Laminar Heat Transfer Performance of Hybrid Nanofluid in a Lid Driven Cavity Over Solid Block | Rajesh Nimmagadda, Durga Prakash Matta, Rony Reuven, Lazarus Godson Asirvatham, Somchai Wongwises, Anjaneyulu Yerramilli, Srinath Adusumilli | American Society of Mechanical Engineers, Power Division (Publication) POWER | August 2020; Vol. 2020, art. no. v001t11a004 |
8 | Effect of geometrical parameters on the evaporative heat transfer and pressure drop of R-134a flowing in dimpled tubes | Kanit Aroonrat, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Omid Mahian, Ho Seon Ahn, Somchai Wongwises | Heat and Mass Transfer | |
9 | Design and analysis of shell and tube heat exchanger for low temperature applications using CFD | Anand, R.S., David, S., Gajendiran, M., Stanley, K. | IOP Conference Series: Materials Science and Engineering | September 2020; 912 (4), art. no. 042056. (Conference paper) |
10 | Experimental study on novel curved blade vertical axis wind turbines | Kalakanda Alfred Sunny, Pradeep Kumar, Nallapaneni Manoj Kumar | Results in Engineering | September 2020; 7, 100149 |
11 | Experimental Investigation for the Multi-objective Optimization of Machining Parameters on AISI D2 Steel Using Particle Swarm Optimization Coupled with Artificial Neural Network | Gopan, V., Wins, K.L.D., Evangeline, G., Surendran, A. | Journal of Advanced Manufacturing Systems | September 2020; 19(3), pp. 589-606. (ESCI) |
12 | Experimental investigation on two-phase heat transfer of R-134a during vaporization in a plate heat exchanger with rough surface | Jutapat Soontarapiromsook, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Omid Mahian, Somchai Wongwises, Ho Seon Ahn, | International Journal of Heat and Mass Transfer | October 2020; 160, 120221 |
13 | A power efficient delta-sigma ADC with series-bilinear switch capacitor voltage-controlled oscillator | Shylu, D.S., Paul, P.S., Moni, D.J., Helan, J.A.M. | Telkomnika (Telecommunication Computing Electronics and Control) | October 2020; 18(5), pp.2618-2627. |
14 | A prognostic analysis on experimental evaluation of thermosyphon using refrigerant R134a and water based on machine learning and optimization techniques | Anand R S, Shibin David | Heat and Mass Transfer | 2020 |
15 | Experimental and numerical studies on heat transfer enhancement for air conditioner condensers using a wavy fin with a rectangular winglet | Nares Chimres, Thunyawat Chittiphalungsri, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Omid Mahian, Somchai Wongwises | Journal of Mechanical Science and Technology | 2020; 34(10), pp.1-7 |
16 | Effect Of Load and Sliding Distance on Tribological Properties of Aisi 1040 Steel By Magnetron Sputtered Ti-6al-4v Coating | R. Malkiya Rasalin Prince, D. Arulkirubakaran, V. Naveen, J. Allan Paulraj, S. Arokkia Julius Raja | IOP Conf. Series: Materials Science and Engineering | October 2020; 923(1), 012028. |
17 | Study of Cutting Forces and Prediction of Surface Quality Analysis Using Neural Network Model, Support Vector Regression Model By Various Textured Tool Condition For Ti-6al-4v Alloy | D. Arulkirubakaran, R. Malkiya Rasaline Prince, R. Monish kumar, S. Aravinthkumar, C. Andrew Joshva | IOP Conf. Series: Materials Science and Engineering | October 2020; 923(1), 012008. |
18 | Study on low cycle fatigue and tensile behavior of Al 5083/CNT/ MoB/Ni hybrid composite | Sajeeb Rahiman, A.H., Robinson Smart, D.S | International Journal of Manufacturing, Materials, and Mechanical Engineering | October-December 2020; 10(4), pp.13-24. |
19 | Tribological and mechanical performance characteristics of Epoxy-resin composites reinforced with multi-walled carbon nanotubes for sustainable applications | Kurien, R.A., Selvaraj, D.P., Sekar, M., Koshy, C.P. | Journal of Green Engineering | October 2020; 10(10), pp. 8859-8873. |
20 | Parametric investigation and year round performance of a novel passive multi-chamber vertical solar diffusion still: Energy, exergy and enviro-economic aspects | Sharon, H., Reddy, K.S., Gorjian, S | Solar Energy | November 2020; 211, pp. 831-846. |
21 | Dry sliding wear analysis OF Al5083/CNT/Ni/MoB hybrid composite using DOE Taguchi method | A.H. Sajeeb Rahiman, D.S RobinsonSmart, Boby Wilson, Irshad Ebrahim, Bibin Eldhose, Basil Mathew Rony Thomas Murickan | Wear | November 2020; 460–461 (15), 203471. |
22 | Fabrication and study of Al6061-T6 reinforced with TiO2 nanoparticles by the process of friction stir processing | R. Raja, P. Jegathambal, Sabitha Jannet, Titus Thanckachan, C. S. Glen Paul, Stephen Reji, and K. Sumanth Ratna | AIP Conference Proceedings | November 2020; 2270(1), 030002(1-6) |
23 | Effect of Temperature on Nano Metal Oxide Coating in Boring Hardened Steel | G. Lawrance, P. Sam Paul, A. S. Varadarajan, Titus Thankachan, Jeffrey Shaji | AIP Conference Proceedings | November 2020; 2270(1), 030003(1-5) |
24 | Dimensional synthesis of adjustable mechanism to generate square path verified by reconstructed adjustable parameter curve method | Govindasamy, G., Clinton Wilson, B.V., Rai, R.S. | AIP Conference Proceedings | November 2020; 2270(1), 40009. |
25 | Thermal Management of Electronic Devices Using Gold and Carbon Nanofluids in a Lid-Driven Square Cavity under the Effect of Variety of Magnetic Fields | Nimmagadda, R., Reuven, R., Asirvatham, L.G., Wongwises, S. | IEEE Transactions on Components, Packaging and Manufacturing Technology | November 2020; 10 (11), art. no. 9139472, pp. 1868-1878. |
26 | A review of experimental studies on cylindrical two-phase closed thermosyphon using refrigerant for low-temperature applications | Anand, R.S., Jawahar, C.P., Solomon, A.B., Bellos, E. | International Journal of Refrigeration | December 2020; 120, pp. 296-313. |
27 | Experimental studies on thermophysical and electrical properties of graphene-transformer oil nanofluid | Almeida, C., Paul, S., Asirvatham, L.G., Manova, S., Nimmagadda, R., Bose, J.R., Wongwises, S. | Fluids | December 2020; 5 (4), art. no. A9, . (ESCI) |
28 | , "Heat transfer and fluid flow characteristics in a plate heat exchanger filled with copper foam | Nilpueng, K., Asirvatham, L.G., Dalkılıç, A.S., Mahian, O., Ahn, H.S., Wongwises, S. | Heat and Mass Transfer/Waerme- und Stoffuebertragung | December 2020; 56(12), pp. 3261-3271. |
29 | Derivation Of Synthetic Fuel From Waste Plastic: Investigation Of Engine Operating Characteristics On DI Diesel Engine | Sakthivel Rajamohan, Joseph John Marshal, Sidharth Suresh | Environmental Science and Pollution Research | 2020 |
30 | , "Feasibility of using multiport minichannel as thermosyphon for cooling of miniaturized electronic devices | Stephen Manova, Lazarus Godson Asirvatham, Rajesh Nimmagadda, Jefferson Raja Bose, Somchai Wongwises | Heat Transfer | December 2020; 49(8), pp. 4834-4856. |
31 | Effect of sintering temperature on the mechanical properties of vacuum sintered co-(Zn)-ni-al alloys | G. Johnsy Arputhavalli, S. Agilan, S. Jebasingh, S. Vijay Joseph | Science of Sintering | 2020; 52 (3), pp.329-338. |
32 | Estimation of fuel properties and characterization of hemp biodiesel using spectrometric techniques | Cijil Biju John, Antony Raja Solamalai, Ranjitha Jambulingam, Deepanraj Balakrishnan | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, | |
33 | Study of dry sliding wear and immersion corrosion on Al 5083 Reinforced with MWCNT, MoB, and Ni | Rahiman, S., Smart, R | International Journal of Surface Engineering and Interdisciplinary Materials Science | July-December 2020; 8(2), pp. 38-51. |
34 | A study on novel ducted blade VAWT using subsonic wind tunnel | Sunny, K.A., Kumar, P., Rao, G.B | Journal of Green Engineering | December 2020; 10(12), pp.13410-13415. |
35 | Recent developments in Al7075 hybrid composites and study on its microstructure and mechanical characteristics | Jeffin Johnson and R. Raja | IOP Conf. Series: Materials Science and Engineering | December 2020; 993, 012023. |
36 | Optimization of cutting parameters of hybrid metal matrix composite AA6061/ ZrB2 and ZrC during dry turning | Rajesh Ruban. S, J David Raja Selvam, Leo Dev Wins K, Sumanth Ratna Kandavalli | IOP Conf. Series: Materials Science and Engineering | December 2020; 993(1), Article number 012135. |
37 | Effect of textures on machining of carbon steel under dry cutting condition | S.Rajesh Ruban, P. Jayaseelan, M. Suresh, Sumanth Ratna Kandavalli | IOP Conference Series: Materials Science and Engineering | December 2020; 993(1), Article number 012143. |
38 | Thermal analysis of pentagonal profiled friction stir welding tool using Ansys | Jayaseelan. P, S. Rajesh Ruban, M. Suresh, N. S.Gowtham, P.Saravanan | IOP Conference Series: Materials Science and Engineering | December 2020; 993(1), Article number 012144. |
39 | Optimization on friction and wear behaviour of Al-Si alloy reinforced with B4C particles by Powder Metallurgy using Taguchi design | R. Jeya Raj, W.A Lenin Anselm, M. Jinnah Sheik Mohamed, S. Christopher Ezhil Singh, T.D John, D. Rajeev, G. Glan Devadhas, K.G. Jaya Christyan, R. Malkiya Rasalin Prince, R.B. Jeen Robert | Bulletin of the Polish Academy of Sciences: Technical Sciences | December 2020; 68(6), pp.1393-1402. |
40 | Ergonomic evaluation of the risk factors causing pain in the upper part of the body among IT professionals in India | Sahu, M., Gnanaraj Solomon, D., Vijay, S.J., Sudhahar, J.C | Work | 2020; 67(4), pp.993-1005. |
41 | High temperature mechanical and creep performance of AA7075/TaC/Si3N4/ Ti hybrid metal matrix composites | Smart, D.S.R., Kumar, J.P., Smart, J.J | International Journal of Manufacturing, Materials, and Mechanical Engineering | January-March 2020; 11(1), pp. 50-62. |
42 | Fabrication and Tensile Testing of DHAK Fiber Reinforced Polyester Composites | Partha Pratim Das, Gorrepati Srinivasa Rao, Eswara Krishna Mussada, Gadudasu Babu Rao, Bhupendra Prakash Sharma, Umesh Kumar Vates | Advances in Production and Industrial Engineering | pp.53-61. Springer, 2021 |
43 | Effect of Temperature on the Surface Characteristics of Anodized Aluminium Tubes | Sriram Sudhan, A.L., Brusly Solomon, A. | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 591-600. |
44 | Effect of Compaction Loads in Machining of Short Carbon Fiber-Reinforced Aluminum Composite | Mohanasundaram, S., Vijay, S.J., Rai, R.S., Kantharaj, I., Melwyn, A.S., Theophilus, S. | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 157-165. |
45 | Comparative Evaluation of Mechanical Properties of GFRP and Polymer Hybrid Composite | Raja, R., Jannet, S., Varughese, A., George, J | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 441-450. |
46 | Influence of Graphite Particles on Microhardness and Microstructural Behavior of AA7068 Metal Matrix Composites Processed by Powder Metallurgy | John Joshua, K., Vijay, S.J., Ramkumar, P., Philip Selvaraj, D | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 91-99. |
47 | Effect of Friction Stir Welding Tool on Al–SiC Composites by Varying Tool Pin Profile and Tool Material | Jayaseelan, P., Christy, T.V., Vijay, S.J. | Trends in Manufacturing and Engineering Management, Lecture Notes in Mechanical Engineering | 2021; pp. 673-679. |
48 | Microhardness and Microstructural Behavior of AA7068/SiC Metal Matrix Composites Synthesized by Powder Metallurgy | John Joshua, K., Ramkumar, P., Vijay, S.J., Mohanasundaram, S | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 101-109. |
49 | Experimental Investigation on Heat Pipe-Assisted Cooling During Milling Process of AISI 1040 | Kantharaj, I., Hiran Gabriel, D.J., Prakash, J.B., Mohanasundaram, S. | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 601-609 |
50 | Artificial Neural Network and Genetic Algorithm-Based Models for Predicting Cutting Force in Turning of Hardened H13 Steel | Leo Dev Wins, K., Anuja Beatrice, B., Ebenezer Jacob Dhas, D.S., Anita Sofia, V.S. | Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management | 2021; pp. 627-635 |
51 | Computational Analysis of Boring Tool Holder with Damping Force | G. Lawrance, P. Sam Paul, A. S. Varadarajan | Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, Trends in Manufacturing and Engineering Management, | 2021; pp 925-934 |
52 | Feasibility of Al2O3/Water Nanofluid in a Compact Loop Heat Pipe | Emerald Ninolin Stephen, Lazarus Godson Asirvatham, Kandasamy Ramachandran, Arulanatham Brusly Solomon, and Pitchaimuthu RamKumar | Trends in Mechanical and Biomedical Design, Lecture Notes on Mechanical Engineering | 2021; pp 467-483. |
53 | Optimal Dimensional Synthesis of Double-Semi-circle and Double-Semi-ellipse Path Generating Adjustable Four-Bar Mechanisms | Ganesan Govindasamy, Gadudasu Babu Rao, and Rajakumar S. Rai | Trends in Mechanical and Biomedical Design, Lecture Notes on Mechanical Engineering | 2021; pp 97-107 |
54 | , "Optimal Dimensional Synthesis of Rhombus Path Generating Adjustable Four-Bar Mechanism | Ganesan Govindasamy, Rajakumar S. Rai, and Gadudasu Babu Rao | Trends in Mechanical and Biomedical Design, Lecture Notes on Mechanical Engineering | 2021; pp 71-82 |
55 | Experimental Investigations of Initial Push Forces on an Industrial Trolley | Masepogu Wilson Kumar, Gadudasu Babu Rao, K. Balasubramanian, and I. Kantharaj | Trends in Mechanical and Biomedical Design, Lecture Notes on Mechanical Engineering | 2021; pp 149-158. |
56 | Kinematic Analysis and Dimensional Synthesis of Filleted-Rhombus Path Generating Adjustable Four-Bar Mechanism | Ganesan Govindasamy, Clinton Wilson, and K. Neeraj | Trends in Mechanical and Biomedical Design, Lecture Notes on Mechanical Engineering | 2021; pp 139-148 |
57 | Some Studies on Surface Roughness of AISI 304 Austenitic Stainless Steel in Dry Turning Operation | D. Philip Selvaraj and P. Richard Philip | Trends in Mechanical and Biomedical Design, Lecture Notes on Mechanical Engineering | 2021; pp 869-877. |
58 | Design and Fabrication of an Automated Laptop Stand", Advances in Industrial Automation and Smart Manufacturing | Mona Sahu, Kondru Gnana Sundari, and Emerald Ninolin Stephen | Lecture Notes in Mechanical Engineering | 2021; 23, pp.131-139. |
59 | Recent Ergonomic Interventions and Evaluations on Laptop, Smartphones and Desktop Computer Users | Mona Sahu, Kondru Gnana Sundari, and Abhishek David | Advances in Industrial Automation and Smart Manufacturing, Lecture Notes in Mechanical Engineering | 2021; 23, pp.207-224. |
60 | ECM Machining and Its Process Optimization for AISI 304 Steel | D. Arulkirubakaran, Malkiya Ralsine Prince, D. Palanisamy, N. Manikandan, and R. Ramesh | Advances in Industrial Automation and Smart Manufacturing, Lecture Notes in Mechanical Engineering | 2021; 23, pp.357-365. |
61 | Prediction of Performance Measures in Wire Electrical Discharge Machining of Aluminum–Fly Ash Composites Using Regression Analysis | D. Palanisamy, N. Manikandan, Ramesh Raju, D. Arul Kirubakaran, and J. S. Binoj | Advances in Industrial Automation and Smart Manufacturing, Lecture Notes in Mechanical Engineering | 2021; pp.387-396. |
62 | Predictive Models for Wire Spark Erosion Machining of AA 7075 Alloy Using Multiple Regression Analysis | N. Manikandan, J. S. Binoj, P. C. Krishnamachary, P. Thejasree, and D. Arul Kirubakaran | Advances in Industrial Automation and Smart Manufacturing, Lecture Notes in Mechanical Engineering | 2021; pp.429-438. |
63 | Innovative potential of additive friction stir deposition among current laser based metal additive manufacturing processes: A review | Vipin Gopan, Leo Dev Wins K, Arun Surendran | CIRP Journal of Manufacturing Science and Technology | January 2021; 32, pp.228-248. |
64 | Palm stearin biodiesel: preparation, characterization using spectrometric techniques and the assessment of fuel properties | Cijil B. John, S. Antony Raja, B. Deepanraj & H. C. Ong | Biomass Conversion and Biorefinery | 2021 |
65 | Effect of geometrical parameters on the evaporative heat transfer and pressure drop of R-134a flowing in dimpled tubes | Kanit Aroonrat, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Omid Mahian, Ho Seon Ahn, Somchai Wongwises | Heat and Mass Transfer | 2021; 57, pp. 465–479. |
66 | Effect of magnetic field on the thermophysical properties of low-density ferrofluid with disk-shaped MgFe2O4 nanoparticles | Ajith, K., Pillai, A.S., Enoch, I.V.M.V., Solomon, A.B. | Colloids and Surfaces A: Physicochemical and Engineering Aspects | March 2021; 613, art. no. 126083 |
67 | Worn Surface Morphological Characterization of NaOH-Treated Chopped Abaca Fiber Reinforced Epoxy Composites | Kurien, R.A., Selvaraj, D.P., Koshy, C.P. | Journal of Bio- and Tribo-Corrosion | March 2021; 7 (1), art. no. 31 |
68 | Parametric optimization of biogas potential in anaerobic co-digestion of biomass wastes | A.Vijin Prabhu, S.Antony Raja, A.Avinash, Arivalagan Pugazhendhi | Fuel | March 2021; 288, 119574. |
69 | Magnetic and mechanical characterization of Al-MWCNT-Fe-Ni hybrid metal matrix composites | Alexandre Tugirumubano, Sun Ho Go, Hee Jae Shin, Vijay Santhiyagu Joseph, Lee Ku Kwac, Hong Gun Kim | Materials Science & Engineering B | April 2021; 266, 115045, pp.1-12. |
70 | Design, Fabrication, and Performance Analysis of Intelligent Mesoscale Capacitive Accelerometer for Vibration Measurement | Gomathi, K., Sakthivel, R., Joseph John Marshal, S., Pratheep, V.G. | Journal of Testing and Evaluation | July 2021; 49(4), pp.1-8. |
71 | Application of smart fluid to control vibration in metal cutting: a review | Sarath, S., Paul, P.S, | World Journal of Engineering | 2021 |
72 | Performance evaluation and emission characteristics of variable compression ratio diesel engine using Argemone Mexicana biodiesel | Suresh, M., Jawahar, C.P., Renish, R., Malmquist, A | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | 2021, 43(12), pp. 1511-1523. |
73 | Computational Microfluidic Channel for Separation of Escherichia coli from Blood-Cells | Chinnapalli Likith Kumar, A. Vimala Juliet, Bandaru Ramakrishna, Shubhangi Chakraborty, Mazin Abed Mohammed and Kalakanda Alfred Sunny | Computers, Materials & Continua | March 2021; 67(2), pp. 1369-1384. |
74 | Influence of Micro B4C Particles Reinforced Al 4043 Composite Filler Wires on Structural Properties of Al 6061 Weldment", | Ramani, S., Leo Dev Wins, K., Robinson Gananadurai, R., | Lecture Notes in Mechanical Engineering | 2021; pp. 155-164. |
75 | Mechanical Characterization and Evaluation of NaOH Treated Chopped Abaca Fiber Reinforced Epoxy Composites | Rittin Abraham Kurien, D Philip Selvaraj, M Sekar, Chacko Preno Koshy, D Tijo | Materials Science Forum | 2021; 1019, pp. 12-18. |
76 | Experimental Investigation on Tribological Characteristics of NaOH Treated Chopped Abaca Fiber Reinforced Epoxy Composites | Rittin Abraham Kurien, D Philip Selvaraj, M Sekar, R Rajasekar, Chacko Preno Koshy | Materials Science Forum | 2021; 1019, pp. 25-31. |
77 | Multi objective optimization of wire-electrical discharge machining of stellite using Taguchi - Grey approach | S. Ujjaini Kumar, N. Manikandan, J.S. Binoj, P. Thejasree, S. Shajahan, D. Arulkirubakaran | Materials Today: Proceedings | Volume 39, Part 1, March 2021; Pages 216-222. |
78 | Laser turning of alumina (Al2O3) ceramic by Nd:YAG laser technique | D. Sriram, G. Jayaprakash, D. Arulkirubakaran, M. Prabu, A. Ajithkumar | Materials Today: Proceedings | March 2021; 39, pp. 731-735. |
79 | Comparison of corrosion behavior on laser welded austenitic stainless steel | A. Gnanarathinam, D. Palanisamy, N. Manikandan, A. Devaraju, D. Arulkirubakaran | Materials Today: Proceedings | March 2021; 39, pp. 649-653. |
80 | Performance Evaluation of Textured Inserts with MQL in Machining of PH Stainless Steel | D. Palanisamy, S. Jayasurya, N. Manikandan, D. ArulKirubakaran, V. Divakar | Materials Today: Proceedings | March 2021; 39, pp. 279-284. |
81 | Machinability Analysis and Optimization of Wire-EDM Textured Conventional Tungsten Carbide Inserts in Machining of 17-4 PH Stainless Steel | D. Palanisamy, N.Manikandan, R. Ramesh, M. Kathirvelan, D. Arulkirubakaran | Materials Today: Proceedings, | March 2021; 39, pp. 359-367. |
82 | Development of neural network models for wire electrical discharge machining of Haste alloy | D. Palanisamy, N. Manikandan, R. Ramesh, A. Devaraju, D. ArulKirubakaran | Materials Today: Proceedings | March 2021; 39, pp. 438-445. |
83 | Development of Grey-ANFIS Model for Wire Electrical Discharge Machining of Al-GNP Composites | D. Palanisamy, N. Manikandan, R. Ramesh, J.S. Binoj, D. Arulkirubakaran | Materials Today: Proceedings | March 2021; 39, pp. 301-310. |
84 | Optimization and performance evaluation of PLA polymer material in situ carbon particles on structural properties | Ramesh Raju, N. Manikandan, J.S. Binoj, D. Palanisamy, D. Arulkirubakaran, P. Thejasree, A. Pavan Kalyan, G. Subhash Reddy | Materials Today: Proceedings | March 2021; 39, pp. 223-229. |
85 | Study on the Influence of Auxiliary Mass on Displacement Using Computational Static Analysis | P. Sam Paul, D. S. Shylu, Lawrance | Advances in Design and Thermal Systems, Lecture Notes in Mechanical Engineering, Springer, | 2021; pp.541-546. ISBN 978-981-33-6427-1 ISBN 978-981-33-6428-8 |
86 | Investigation on Tribological Properties of Chromium-Filled Particle Damper During Hard Boring Process | Lawrance G., Sam Paul P., Gokul R., Subhash M., Ezhil M., Ebi Ashish J | Advances in Design and Thermal Systems, Lecture Notes in Mechanical Engineering. Springer, | 2021; pp.493-499. ISBN 978-981-33-6427-1 ISBN 978-981-33-6428-8 |
87 | A Novel architecture of a Low Power Folded Cascode OTA in 180nm CMOS process | Shylu Sam, D.S., Paul, P.S., Jayanthi, D. | 2021 7th International Conference on Advanced Computing and Communication Systems, ICACCS | 2021, 2021; art. no. 9441988, pp. 95-99. (ECE) |
88 | Aerodynamic simulation of optimized vortex generators and rear spoiler for performance vehicles | Murugadoss, Palanivendhan & Chandradass, J. & Bannaravuri, Praveen & Philip, Jennifer & Shubham, Kumar | Materials Today: Proceedings, | March 2021; 45(7), pp.7228-7238. |
89 | Magnetic and mechanical characterization of Al-MWCNT-Fe-Ni hybrid metal matrix composites | Alexandre Tugirumubano, Sun Ho Go, Hee Jae Shin, Vijay Santhiyagu Joseph, Lee Ku Kwac, Hong Gun Kim | Materials Science & Engineering B, | April 2021; 266, 115045, pp.1-12. |
90 | Microstructure and sliding wear behavior of fly ash reinforced dual phase brass surface composites synthesized through friction stir processing | I.Dinaharan, S.Kapagarajan, R.Palanivel, J. David Raja Selvam | Materials Chemistry and Physics, | April 2021; 263, art. no. 124430. |
91 | Effect of egg shell powder on the mechanical and microstructure properties of AA 2024 metal matrix composite | Sabitha Jannet, R. Raja, S. Rajesh Ruban, Samuel Khosla, Uppara Sasikumar, Nagaruru Balaji Sai, Papasani Muni Teja, | Materials Today: Proceedings, | 2021; 44(1), pp.135-140, ISSN 2214-7853. |
92 | Synthesis of Al and Cu wires embedded glass fiber reinforced polymer (AWGFRP and CWGFRP) composites and their mechanical characterization | R. Raja, Sabitha Jannet, Lijin George, Vishal M. Rao, Nikhil Sebastian, Shaun Payappilly Thomas | Materials Today: Proceedings, | 2021; 44(1), pp.75-78, ISSN 2214-7853. |
93 | Coagulation influencing parameters investigation on textile industry discharge using Strychnos potatorum seed powders | Sneha Gautam, Amarpreet Singh Arora, Anish Kumar Singh, Prabhat Ekka, Himanshu Daniel, Boya Gokul, Sunny Toppo, Prabha Chockalingam, Hans Kumar & Jerry Ford Lyngdoh | Environment, Development and Sustainability | April 2021; 23 (4), pp. 5666 - 5673. |
94 | Fabrication of Jackfruit Stems Fiber Composites | G. Srinivasa Rao, Saurav Saha, Ashiq Mohammed, Rakesh Kumar Phanden, Eswara Krishna Mussada, Gadudasu Babu Rao, Praveen Kumar Bannaravuri, Umesh Kumar Vates, Bhupendra Prakash Sharma, Vijay Chaudhary, Gaurav Gupta | Lecture Notes in Mechanical Engineering, Advances in Engineering Materials, Springer, | pp. 495-504. Print ISBN 978-981-33-6028-0, Online ISBN 978-981-33-6029-7. |
95 | Effect of Titanium dioxide nanoparticle as an additive on the working characteristics of biodiesel-water emulsion fuel blends | Vellaiyan, S., Subbiah, A., Chockalingam, P | Energy Sources, Part A: Recovery, Utilization and Environmental Effects, | May 2021; 43(9), pp.1087-1099. (Karunya Institute of Technology Sciences) |
96 | Design techniques in carry select adder using parallel prefix adder for improved switching energy | SAM, S., PAUL, S., JINGLE, D.J., PAUL, M., Anuradha, RANI, J.S | Przeglad Elektrotechniczny | 2021; 97 (5), pp. 152-155. (ESCI) |
97 | A brief review on the evolution of metallic dental implants: history, design, and application | Sumanth R. Kandavalli, Qingge Wang, Mahmoud Ebrahimi, F. Djavanroodi, Shokouh Attarilar, and Shifeng Liu | Frontiers in Materials | May 2021; 8, 646383, pp.1-16. |
98 | Optimal process characteristics of melting of polyisoprene | Mohanraj, K., Rai, R.S., Suresh, M., Logapriya, B., Marichamy, S., Muthuraj, S | Materials Today: Proceedings | 2021; 45, pp. 2413-2415. |
99 | Performance and optimization of parameters on rubber punching process | Ravikumar, N., Sharmila, P., Premnath, S.P., Rai, R.S., Khan, J.M.F., Subbiah, R. | Materials Today: Proceedings | 2021; 45, pp. 2581-2583 |
100 | Mechanical and metallurgical studies of multi-walled carbon nanotube- reinforced aluminium metal matrix surface composite by friction stir processing | Raja, R., Jannet, S., Ruban, S.R. | International Journal of Advanced Technology and Engineering Exploration, | May 2021; 8 (78), pp. 643-650.. |
101 | Vibration control techniques during turning process: a review | X. Ajay Vasanth, P. Sam Paul, G. Lawrance and A.S. Varadarajan | Australian Journal of Mechanical Engineering, | 2021; 19(2), pp. 221-241. (ESCI) |
102 | Experimental studies on thermosyphon using low global warming potential refrigerant HFE7000 and nanorefrigerant HFE7000/Al2O3 | Anand, R.S., Jawahar, C.P., Brusly Solomon, A., Benson, V., Alan K, A., Vignesh Nair, K.P., Alan, V.A | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, | June 2021; 235(3), pp.707-717. |
103 | Effect of rheological fluid parameters on tool vibration during boring of hardened steel | Lawrance, G., Paul, P.S., Vasanth, X.A., Varadarajan, A.S. | Journal of Advanced Manufacturing Systems, | 2021; pp.June 2021; 20 (2), pp. 447-470. (ESCI) 157-165. |
104 | Conjugate heat transfer performance of stepped lid-driven cavity with Al2O3/water nanofluid under forced and mixed convection | Janjanam, N., Nimmagadda, R., Asirvatham, L.G., Harish, R., Wongwises, S. | SN Applied Sciences | June 2021; 3(6), art. no. 605. (ESCI) |
S.no | Jul 2019 - Jun 2020 | Author's Name | Journal Name | Year, Volume, Issue, Page No |
---|---|---|---|---|
1 | Damping Characteristics of Aluminium Matrix Composites - A Review | Rahiman, A.H.S., Smart, D.S.R. | Materials Today: Proceedings | 2019; 11(3), pp.1139-1143. |
2 | Entropy measures for medical image analysis | Krishnamurthy, K., Ponnuswamy, M.J. | Current Bioinformatics | 2019; 14 (4), pp. 280-281. |
3 | Optimization of Cutting Parameters in Hard Turning of OHNS Steel | Anil Raj, K. Leo Dev Wins, M. Dev Anand | International Journal of Recent Technology and Engineering (IJRTE) | July 2019; 8(2S3), pp. 43-45. |
4 | Influence of Frequency Ratio on the Hydroelastic Response of a Cylinder with Degrees of Freedom under Vortex Induced Vibration | Vidya Chandran, M Sekar, Sheeja Janardhanan | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | July 2019; 8 (9S3), pp.307-312. |
5 | Effect of tool material, profile and D/d ratio in friction stir welding of aluminium metal matrix composites | P Jayaseelan, T V Christy, S J Vijay and R Nelson | Materials Research Express | July 2019; 6(9), Article number 096590 |
6 | Fluid flow and Heat Transfer Characteristics of Heat Sinks with Laterally Perforated Plate Fins | Sakkarin Chingulpitak, Ho Seon Ahn, Lazarus Godson Asirvatham, Somchai Wongwises | International Journal of Heat and mass Transfer | August 2019; 138, pp.293-303. |
7 | Thermophysical properties of refined kerosene—alumina nanofluid | Pillai, B.C., Panicker, S., Sundararaj, A.J., Asirvatham, L.G. | Recent Advances in Materials, Mechanics and Management - Proceedings of the 3rd International Conference on Materials, Mechanics and Management, IMMM 2017 | 2019; pp. 263-269. |
8 | Microstructure Characterization of in-situ formed Al2O3-TiB2 AMCs particles on AA6061 aluminium matrix composites | S Vipin Philip, J David Raja Selvam, Rajakumar S Rai, P.M. Mashinini | Materials Today: Proceedings | 2019; 6 (Part 2), pp.574-578. |
9 | Behavior of Threaded Cylinder tool in the Friction Stir Welding of Al-SiC composite | P.Jayaseelan, T.V.Christy | Materials Today: Proceedings | 2019; 16, Part 2, 2019, pp. 1090-1096. |
10 | Predictive analysis of cryptocurrencies for developing an interactive cryptocurrency chatbot using IBM Watson assistant | A. Shamila Ebenezer, S. Jebapriya, B. Jefferson Raja Bose | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | August 2019; 8(10), pp.436-447. |
11 | Experimental investigation and characterization of in situ synthesized sub micron ZrB2-ZrC particles reinforced hybrid AA6061 aluminium composite | Rajesh Ruban S, Leo Dev Wins K, J David Raja Selvam and Rajakumar S Rai | Materials Research Express | September 2019; 6(10) Article 1050E1. |
12 | Optimization of milling parameters of ASTM a 995 grade 4A Duplex Stainless Steel using Taguchi Technique | D. Philip Selvaraj, P. Chandramohan, P. K. Rajesh | International Journal of Recent Technology and Engineering | September 2019; 8(3), pp.5840-5843. |
13 | Multi-objective optimization in WEDM process of graphene – SiC-magnesium composite through hybrid techniques | Kavimani, V., Soorya Prakash, K., Thankachan, T | Journal of the International Measurement Confederation | October 2019; 145, pp.335-349. |
14 | Investigating the effects of hybrid reinforcement particles on the microstructural, mechanical and tribological properties of friction stir processed copper surface composites | Thankachan, T., Prakash, K.S., Kavimani, V. | Composites Part B: Engineering | October 2019; 174, art. no. 107057. |
15 | Role of zirconium diboride particles on microstructure and wear behaviour of AA7075 in situ aluminium matrix composites at elevated temperature | J. David Raja Selvam, I. Dinaharan, Rajakumar S. Rai & P. M. Mashinini | Tribology - Materials, Surfaces & Interfaces | October 2019; 13(4), pp.230-238. |
16 | Design and Fabrication of a Low-Cost Assistive Device to Support the Basic Movements for Elderly People | Masepogu Wilson Kumar, M. Suresh*, K. Balasubramanian, Gerald Chandrasekhar | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | October 2019; 9(5), pp.851–860. |
17 | Optimization of Cutting Force of AISI 304 Austenitic Stainless Steel in a Wet Turning Process | D. Philip Selvaraj, P. Richard Philip | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | October 2019; 8(12), pp. 4709-4711. |
18 | Influence Of Radius Of The Sternum Plate Pneumatically Driven Parallel Manipulator Used For Chest Compressions On A Closed Loop Manikin | Gadudasu Babu Rao, Mona Sahu, M Wilson Kumar, Alfred Sunny, Praveen Kumar Bannaravuri | International Journal of Scientific & Technology Research | October 2019; 8(10), pp.1054-1058. |
19 | Synthesis and Characterisation of B4C reinforced Al6061 Friction Stir Processed Surface Composites | S. Mohanasundaram, S. J. Vijay, Rajakumar S. Rai, D. Emmanuel Sam Franklin | International Journal of Engineering and Advanced Technology (IJEAT) | October 2019; 9(1), pp. 2883- 2887. |
20 | Optimization of Ready-To-Drink Beverage and Ready-To-Reconstitute Mix of Ginger Based Appetizer | S Elizabeth Amudhini Stephen, Emilin Renita, George Samuel Raj V, Basil Joseph | International Journal of Engineering and Advanced Technology (IJEAT) | October 2019; 9(1), pp.3174-3176. |
21 | Experimental investigation on the critical heat flux of Cu-water, Al-water nanofluids for precise cooling of electronic systems | R Catherine Joy, A Albert Rajan, A Brusly Solomon, K Ramachandran and B C Pillai | IOP Conference Series: Materials Science and Engineering | November 2019; 561, 012036. |
22 | An experimental study on the prediction of grinding wheel dressing intervals by relating wheel loading and surface roughness | Vipin Gopan, K. Leo Dev Wins, Arun Surendran | International Journal of Abrasive Technology | 2019, 9(3), pp.171-187. |
23 | Experimental Evaluation of Mechanical, Wear and Corrosion properties of AA5083/Graphite Metal Matrix Composite Prepared using Compocasting Process | J.Pradeep Kumar, D.S.Robinson Smart, Erick C. Jones | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | November 2019; 9(1), pp. 2352-2357 |
24 | Thermal Performance of Plate Fin Heat Sink Combined with Copper Foam | Kitti Nilpueng, Ahmet Selim Dalkilic, Lazarus Godson Asirvatham, Omid Mahian, Somchai Wongwises | Heat Transfer Research | November 2019; 50(16), pp.1595-1613 |
25 | Experimental investigation of condensation heat transfer on chlorotriethylsilane coated grooved vertical tube | John Paul Panuthara, Joe Paul Martin Muttathara, Rajkumar Mattacaud Ramachandralal, Lazarus Godson Asirvatham, Somchai Wongwises | International Communications in Heat and Mass Transfer | November 2019; 108, 104312. |
26 | Application of the heat pipe to enhance the performance of the vapor compression refrigeration system | Santiphap Nakkaew, Thunyawat Chitipalungsri, Ho Seon Ahn, Dong-Wook Jerng, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Omid Mahian, Somchai Wongwises | Case Studies in Thermal Engineering | November 2019; 15, 100531 |
27 | U-drill embedded with phase change heat transfer device for machining applications | I. Kantharaj, M. Sekar, A. Brusly Solomon, Nallapaneni Manoj Kumar, Kalakanda Alfred Sunny | Case Studies in Thermal Engineering | November 2019; (15), 100533. |
28 | Low Cost Design And Fabrication Of Collision Avoidance System For An Automobile Model Using Proximity Sensors | M. Suresh, Masepogu Wilson Kumar, Alfred sunny, Jefferson Raja Bose, K.Balasubramanian, C. John Kennedy, R.Jayaseelan, T.Suresh Simon and P.Daniel Rajasingh | International Journal of Scientific & Technology Research | November 2019; 8(11), pp.2367-2371. |
29 | Corrosion rate of Al-Si Alloy Reinforced with B4C Nanoparticle prepared by Powder Metallurgy Method using RSM | Abraham Subaraj. M, Bensam Raj. J, Malkiya Rasalin Prince. R, Glan Devadhas.G, Christopher Ezhil Singh. S | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | November 2019; 9(1), pp.4677-4682. |
30 | Effect of reinforcements on specific wear rate of al 7075 / tib2/ cr2o3 hybrid composites | George, L., Smart, D.S.R., Haridas, V | International Journal of Innovative Technology and Exploring Engineering | November 2019; 9 (1), pp. 3451-3454. |
31 | Enhancement of Working Postures of Industrial Workers Through Sit-Stand Assembly Workstation | Masepogu Wilson Kumar, Mona Sahu, Gadudasu Baburao, M.Suresh and S.J.Vijay | International Journal of Scientific & Technology Research | November 2019; 8(11), pp.3275-3279. |
32 | Effect of work postures on the musculoskeletal stresses on computer aided designers and office staff working on computer in India | Mona Sahu, Alfred Sunny, Masepogu Wilson Kumar, Gadudasu Baburao, Gnanasaravanan S | International Journal of Scientific & Technology Research | November 2019; 8(11), pp.1120-1123. |
33 | Effect of Filling Ratio and Tilt Angle on the Performance of a Mini-Loop Thermosyphon | Trijo Tharayil, Neha Gitty, Lazarus Godson Asirvatham, Somchai Wongwises | Journal of Thermal Science and Engineering Applications | December 2019; 11 / 061013-1 |
34 | Experimental study on evaporative heat transfer and pressure drop of R-134a in a horizontal dimpled tube | Kanit Aroonrat, Ho Seon Ahn, Dong-Wook Jerng, Lazarus Godson Asirvatham, Ahmet Selim Dalkılıç, Omid Mahian, Somchai Wongwises | International Journal of Heat and Mass Transfer | December 2019; 144 (2019) 118688. |
35 | Suppression of tool vibration in boring process: A review | G. Lawrance, P. Sam Paul, A. S. Varadarajan, X. Ajay Vasanth, Raj, S.B | Journal of The Institution of Engineers (India) | December 2019; 100(6), pp.1053–1069. |
36 | Machinability Analysis and ANFIS modelling on Advanced Machining of Hybrid Metal Matrix Composites for Aerospace Applications | N. Manikandan, K. Balasubramanian, D. Palanisamy, P.M. Gopal, D. Arulkirubakaran, and J.S. Binoj | Materials and Manufacturing Processes | December 2019; 34(16), pp. 1866–1881. |
37 | Effect of magnetic field and nanoparticle shape on jet impingement over stationary and vibrating plates | Rajesh Nimmagadda,Lazarus Godson Asirvatham,Somchai Wongwises | International Journal of Numerical Methods for Heat and Fluid Flow | December 2019; 29(12), pp.4948-4970. |
38 | Towards Reducing Computational Effort in Vortex Induced Vibration Predictions of a Cylindrical Riser | Vidya Chandran, Sheeja Janardhanan, Sekar | Periódico Tchê Química | 2019; 16(33), pp. 841-853. |
39 | A review of challenges and solutions in the preparation and use of magnetorheological fluids | James Sathya Kumar, P. Sam Paul, Girish Raghunathan and Divin George Alex | International Journal of Mechanical and Materials Engineering | December 2019; 14(1), Article number 13. |
40 | Effect of Dispersion Treatment on Dairy Waste Activated Sludge to Hasten the Production of Biogas | D. P. Rufus, J. Rajesh Banu, R. Yukesh Kannah, Dinh Duc Nguyen, Gopalakrishnan Kumar, Soon Woong Chang and S. Antony Raja | Frontiers in Ernergy Research | December 2019; 7(136), pp.1-9. |
41 | Development and investigations of Al5083/CNT/Ni/MoS2 metal matrix composite for offshore applications | D.S. Robinson Smart, J. Pradeep Kumar, R. Sanjit Cyrus | Materials Today: Proceedings | 19 (2019) 682–685. |
42 | Performance Evaluation Of Al7075 Hybrid Metal Matrix Composites During Non-Conventional Machining Process | K. Gnana Sundari, Rishitosh Ranjan B. Surekha | International Journal of Scientific & Technology Research | December 2019; 8(12), pp. 3871-3877. |
43 | Optimization of cutting parameters and prediction of surface roughness during hard turning of H13 steel with minimal vegetable oil based cutting fluid application using response surface methodology | Anil Raj, K. Leo Dev Wins and A. S. Varadarajan | IOP Conference Series: Materials Science and Engineering | December 2019; 577(1), pp.1-8, Article No. 012023. |
44 | Investigation of Caryota urens fibers on physical, chemical, mechanical and tribological properties for brake pad applications | Sai Krishnan, G., Ganesh Babu, L., Kumaran, P., Yoganjaneyulu, G., Sudhan Raj, J. | Materials Research Express | 2020; 7 (1), art. No. 015310. |
45 | Studies on the tribological behaviour of exsitu-synthesized AlMg1SiCu/titanium carbide/molybdenum disulfide hybrid composites | S Rajesh, C. Velmurugan, Ebenezer Jacob Dhas D.S and Samuel Ratna Kumar P S | Materials Research Express | December 2019; 6(12), 1265B4 |
46 | Electron beam welding of oxide dispersion strengthened 9 Cr martensitic steel-an experimental and theoretical perspective | Kavithaa, S., George Shaji, S. Bhandiwad, V. | Materials Today: Proceedings | 22, pp. 2509-2519. |
47 | Electrospinning of PAN–Hematite Composite Nanofiber | Vijay, S.J., Tugirumubano, A, Go, S.H., Kwac, L.K, Kim, H.G | Advances in Materials and Metallurgy, Lecture Notes in Mechanical Engineering | 2019; pp.495-502. |
48 | Usage of powder pinus brutia cone and colemanite combination in brake friction composites as friction modifier | Jeganmohan, S., Sugozu, B | Materials Today: Proceedings | 2020; 27(3), pp. 2072-2075. |
49 | Study on the Influence of Multi-Layered Nano Metal Oxide Coating on Cutting Performance During Boring of Hardened Steel | Lawrance G, Daniel E, Sam Paul P, Jeffrey Shaji, Titus Thankachan | Materials Today: Proceedings | January 2020; 22 (4), pp.1731–1736. |
50 | Experimental investigations on the performance and emission characteristics of a common rail direct injection engine using tyre pyrolytic biofuel | V.K. Shahir, C.P. Jawahar, V. Vinod, P.R. Suresh | Journal of King Saud University – Engineering Sciences | January 2020; 32(1),pp.78-84 |
51 | Effect of thin porous copper coating on the performance of wickless heat pipe with R134a as working fluid | Senthilkumar, C., Krishnan, A.S., Solomon, A.B | Journal of Thermal Analysis and Calorimetry | January 2020; 139 (2), pp. 963-973. |
52 | Experimental Investigations of Glycerin/Al2O3 Nanofluid in the Hydrodynamically Developing Region for Automotive Cooling Applications | Kondru Gnana Sundari, Lazarus Godson Asirvatham, Joseph John Marshal, T. Michael N. Kumar, Mona Sahu | Advances in Materials and Manufacturing Engineering, Lecture Notes in Mechanical Engineering | pp.541-547. |
53 | Heat transfer properties of HFE and R134a based Al2O3 nano refrigerant in thermosyphon for enhancing the heat transfer | Anand, R.S., Jawahar, C.P., Solomon, A.B., Koshy, J.S., Jacob, J.C., Tharakan, M.M. | Materials Today: Proceedings | January 2020; 27, pp. 268-274. |
54 | Preparation, characterization and thermo-physical properties of Cu-graphene nanoplatelets hybrid nanofluids | Kishore, P.S., Sireesha, V., Harsha, V.S., Rao, V.D., Solomon, A.B. | Materials Today: Proceedings | January 2020; 27, pp. 610-614. |
55 | Characterization of magnesium ferrite nanofluids for heat transfer Applications | Ajith, K., Enoch, I.V.M., Solomon, A.B., Pillai, A.S. | Materials Today: Proceedings | January 2020; 27, pp. 107-110. |
56 | Effect on corrosion behaviour of the surface of aluminium 4.5 Cu with bamboo leaf ash composites by laser treatment | Babu Rao Gadudasu, Praveen Kumar Bannaravuri, Anil Kumar Birru | Materials Research Express | January 2020; 7(1), 016594. |
57 | Surface structural features and wear analysis of a multilayer Ti6Al4V-B4C thin film coated AISI 1040 steel | R Malkiya Rasalin Prince, N Selvakumar, D Arulkirubakaran, Christopher Ezhil Singh Sreedharan, Ramkumar Thulasiram, R Monish Kumar | Materials Research Express | January 2020; 7(1), 016436. |
58 | Analysis of mechanical and wear properties of Al2O3 + SiC + B4C/AA5083 hybrid metal matrix composite done by stir casting route | R.Raja, Sabitha Jannet, Stephen Reji, C.S.Glen Paul | Materials Today: Proceedings | January 2020; 26(2), pp.1626-1630. |
59 | Performance evaluation of cryo-treated tungsten carbide inserts in machining PH stainless steel | Palanisamy D, Devaraju A, Manikandan N, Arulkirubakaran D, | Materials Today: Proceedings | January 2020; 22(3), pp.487-491. |
60 | Experimental investigation and optimization of process parameters in EDM of aluminium metal matrix composites | Palanisamy, D., Devaraju, A., Manikandan, N., Balasubramanian, K., Arulkirubakaran, D. | Materials Today: Proceedings | January 2020; 22(3), pp.525-530. |
61 | Experimental investigation on surface integrity during machining of AISI 420 steel with tungsten carbide insert | Palanisamy, D., Devaraju, A., Arulkirubakaran, D., Manikandan, N. | Materials Today: Proceedings | January 2020; 22(3), pp.992-997. |
62 | Effect of SiC Nanoparticles on the Dispersion of Multiwalled Carbon Nano Tubes in AA 5083 by Stir Casting Technique | Sabitha Jannet, E.Pradeep Kumar Reddy, R.Raja, Morish Manohar | Materials Today: Proceedings | January 2020; 22(4), pp.1417-1423. |
63 | Optimization of coating thickness and coating width for friction surfaced Al6061-B4C over Al6061 | S.Mohanasundaram, S.J.Vijay, X. Ajay Vasanth, Rajakumar S.Rai, I.Kantharaj | Materials Today: Proceedings | January 2020; 33(1), pp.939-945. |
64 | Heating and cooling capacity of phase change material coupled with screen mesh wick heat pipe for thermal energy storage applications | Palappan, R.R, Pasupathy, A.P, Asirvatham, L.G, Tharayil, T, Wongwises | Thermal Science | January 2020; 24 (2A) pp. 723-734. |
65 | Biogas production from anaerobic co-digestion of Prosopis juliflora pods with water hyacinth, dry leaves, and cow manure | Vijin Prabhu, A., Manimaran, R., Antony Raja, S., Jeba, P | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | February 2020; 42(3), pp.375-386. |
66 | Viability assessment of solar distillation for desalination in coastal locations of Indian sub-continent – Thermodynamic, condensate quality and enviro-economic aspects | Sharon, H, Reddy, K.S., Krithika, D., Philip, L | Solar Energy | February 2020; 197, pp.84-98. |
67 | Effect of Titanium dioxide nanoparticle as an additive on the exhaust characteristics of diesel-water emulsion fuel blends | Suresh Vellaiyan, Arunkumar Subbiah, and Prabha Chockalingam | Petroleum Science and Technology | February 2020; 38(3), pp.194–202. |
68 | Effect of laser surface melting on surface integrity of Al−4.5Cu composites reinforced with SiC and MoS2 | Bannaravuri P.K., Birru A.K., Dixit U.S. | Transactions of Nonferrous Metals Society of China | February 2020; 30 (2), pp. 344-362. |
69 | Application of bio-wick in Compact Loop Heat Pipe | A. Brusly Solomon, Akhilesh Kumar Mahto, Catherine Joy, A. Albert Rajan, Dubey Abhishek Jayprakash, Abhinav Dixit, Abhinav Sahay | Applied Thermal Engineering | March 2020; 169, Article number 114927, pp.1-11. |
70 | Cooling of high heat flux electronic devices using ultra-thin multiport minichannel thermosyphon | Stephen Manova, L.Godson Asirvatham, Rajesh Nimmagadda, Jefferson Raja Bose, Somchai Wongwises | Applied Thermal Engineering | March 2020; 169, Article number 114669, pp. 1-13. |
71 | Experimental Investigations on Activated-TIG Welding of Inconel 625 and AISI 304 Alloys | Vijay, S.J., Mohanasundaram, S., Ramkumar, P., Kim, H.G., Tugirumubano, A., Go, S.H. | Lecture Notes in Mechanical Engineering | 2020; pp. 311-317. |
72 | Experimental Investigations on the Effect of Wheel Size on an Industrial Trolley | Wilson Kumar Masepogu, Mona Sahu, Santhiyagu Joseph Vijay | Lecture Notes in Mechanical Engineering, Advances in Materials and Manufacturing Engineering | 2020; pp. 557-564 |
73 | Design of a power-efficient Kogge–Stone adder by exploring new OR gate in 45nm CMOS process | John, V., Sam, S., Radha, S., Paul, P.S., Samuel, J. | Circuit World | March 2020; 46 (4), pp. 257-269. |
74 | Effect of ZnO Particles on Microstructure, Microhardness and Wear Behaviour of AA7068 Metal Matrix Composites Synthesized by Powder Metallurgy | K. John Joshua, S.J. Vijay, P. Ramkumar, S. Mohanasundaram | Materials Science Forum | March 2020; Vol. 979, pp 68-73. |
75 | Multi Response Optimization of process parameters of friction stir welded AA6061 T6 and AA 7075 T651 Using Response Surface Methodology, (Web of Science) | R Raja, Sabitha Jannet and S Mohanasundaram | Journal of Scientific & Industrial Research | March 2020; 79, pp. 232-234. |
76 | Performance and combustion analysis of diesel engine fueled by blends of diesel + pyrolytic oil from Polyalthia longifolia seeds | C Prabha, SP Arunkumar, H Sharon, R Vijay, A Mohammed Niyas, P Stanley, K Sumanth Ratna | AIP Conference Proceedings | March 2020; 2225 (1), 030002. |
77 | Combustion characteristics assessment of diesel engine fueled by diesel-butanol-used cooking oil biodiesel blends | Kevin George Thomas, Biswajit Nath, R. Joel Jackson and H. Sharon | AIP Conference Proceedings | March 2020; 2225 (1), 030001(1-6). |
78 | Influence of calcium sulfate whiskers on the tribological characteristics of automotive brake friction materials | Sudhan Raj, J., Christy, T.V., Darius Gnanaraj, S., Sugozu, B. | Engineering Science and Technology, Engineering Science and Technology, an International Journal | April 2020; 23 (2), pp. 445-451. |
79 | Heat transfer characteristics and flow visualization of anodized flat thermosiphon | Varughese, A, Solomon, A.B., Raj, B., Sharifpur, M., Meyer, J.P | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | April 2020; 234(2), pp.182-192. |
80 | Experimental Analysis of Solar Collector with Thermal Storage device (Stone and Sodium Acetate Tri-Hydrate) | C.M. Anand Partheeban and M. Rajendran | JP Journal of Heat and Mass Transfer | April 2020; 19(2), pp.301-316. |
81 | Analysis Of Effect Of Process Parameters On The Tangential Force And Delamination Factor During Drilling Of Glass Fiber Reinforced Polymers | Sabitha Jannet, R. Raja | International Journal of Scientific & Technology Research | April 2020; 9(4), pp. 3549-3551. |
82 | Characterization, Combustion, Emission And Performance Analysis Of Palm Stearin Biodiesel On A Direct Injection Diesel Engine | Cijil B. John, S. Antony Raja | International Journal of Scientific & Technology Research | April 2020; 9(04), pp. 61-67. |
83 | Experimental investigation of the heat transfer and pressure drop characteristics of SiO2/water nanofluids flowing through a circular tube equipped with free rotating swirl generators | Jumpholkul, C., Asirvatham, L.G., Dalkılıç, A.S., Mahian, O., Ahn, H.S., Jerng, D.-W., Wongwises, S | Heat and Mass Transfer/Waerme- und Stoffuebertragung | May 2020; 56(5), pp.1613-1626. |
84 | Performance study of flat heat pipe with metallic copper hierarchical structure as a wick | Solomon, A.B., Joy, C., Rajan, A.A., Ninolin, S.E., Varghese, J | IOP Conference Series: Materials Science and Engineering | June 2020; 872 (1), Article number 012079. |
85 | Green composite materials for green technology in the automotive industry | Kurien, R.A., Selvaraj, D.P., Sekar, M., Koshy, C.P. | IOP Conference Series: Materials Science and Engineering | June 2020; 872 (1), art. no. 012064 |
86 | Experimental Investigation on the Friction and Wear Characteristics of Palm Seed Powder Reinforced Brake Pad Friction Composites | Jeganmohan, S., Sugozu, B., Kumar, M., Selvam, D.R. | Journal of The Institution of Engineers (India): Series D | June 2020; 101(1), pp. 61-69. |
87 | Analysis of combustion, emission and performance attributes of hemp biodiesel on a compression ignition engine | Cijil B. John, S. Antony Raja | World Review of Science, Technology and Sust. Development | 2020: 16(2), pp.169-183. |
88 | A neural network model to predict surface roughness during turning of hardened SS410 steel | X. Ajay Vasanth, P. Sam Paul & A. S. Varadarajan | International Journal of System Assurance Engineering and Management | June 2020; 11(3), pp.704-715. |
89 | Endophytic Microorganisms-Felicitous Applications in Bioremediation of Plastics (Polyester, Polyurethane) | Praveen Kumar Chiruguri, Jagadish Kumar Suluvoy and Masepogu Wilson Kumar | Indian Journal of Ecology | June 2020; 47 Special Issue (11): 216-221. |
90 | Selection of surface electrodes for electrogastrography and analysis of normal and abnormal electrogastrograms using Hjorth information | Alagumariappan, P., Krishnamurthy, K., Jawahar, P.M | International Journal of Biomedical Engineering and Technology | 2020; 32(4), pp.317-330. |
91 | Mechanical properties as a flexural strength of entada rheedii fibre and banana fibre hybrid reinforced polymer composites | Padi, U.C., Christy, T.V., Jerinjose | International Journal on Emerging Technologies | 2020; 11(2), pp.965-972. |
92 | TG/DTA studies on the oxidation and thermal behaviour of Ti-6Al-4V-B4C coatings obtained by magnetron sputtering | R. Malkiya Rasalin Prince, N. Selvakumar, D. Arulkirubakaran, S. Christopher Ezhil Singh, M. Chrispin Das, C. Prabha, Praveen Kumar Bannaravuri, R. B. Jeen Robert, I. Living Prephet | Journal of Applied Research and Technology | June 2020; 18(3), pp.108-118. |
93 | Nanohardness and wear behaviour of AISI 1040 steel coated with Ti-6Al-4V 4B4C by magnetron sputtering | Malkiya Rasalin Prince Russel & Selvakumar Natarajan | Indian Journal of Engineering and Materials Sciences | June 2020, 27, pp.518-528. |
94 | Analysis on Aluminium Hybrid Metal Matrix Composite Reinforced with HfC, Si3N4 and MoS2 Nanoparticles | N. Ummal Salmaan, D. S. Robinson Smart, S. Antony Raja | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | June 2020; 10(3), pp.747–758. |
S.no | Jul 2018 - Jun 2019 | Author's Name | Journal Name | Year, Volume, Issue, Page No |
---|---|---|---|---|
Fabrication and Mechanical Characterization of Stir Cast AA6063-Borosilicate-Fly Ash Hybrid Metal Matrix Composites | G. Jims John Wessley, A. Gaith Franklin, S.J. Vijay | International Journal of Engineering and Technology(UAE) | 2018; 7(3), pp.101-105. | |
2 | Integrated ANN-GA Approach for Predictive Modeling and Optimization of Grinding Parameters with Surface Roughness As the Response | Vipin Gopan, K. Leo Dev Wins, Arun Surendran | Materials Today: Proceedings | 2018; 5(5), pp.12133-12141 |
3 | Thermal Management of Electronic Devices Using Combined Effects of Nanoparticle Coating and Graphene–Water Nanofluid in a Miniature Loop Heat Pipe | Trijo Tharayil, Lazarus Godson Asirvatham, S. Rajesh, and Somchai Wongwises | IEEE Transactions on Components, Packaging and Manufacturing Technology | July 2018; 8(7), pp.1241-1253. |
4 | Study on the Influence of Shaft Material on Vibration in Rotating Machinery | Gerald Chandrashekara, Winston Rajb, Charles Godwinc, P. Sam Paul | Materials Today: Proceedings | July 2018; 5(5), pp.12071-12076 |
5 | Biogas Production from Community Waste to Optimise the Substrate for Anaerobic Digestion | Antony P. Pallan, S. Antony Raja, C. G. Varma, Deepak Mathew, Anil K. S., A. Kannan | International Review of Mechanical Engineering | July 2018; 12(7), pp.580-589 |
6 | Prediction of Effect of Refrigeration System Parameters on the performance of a Vapour Compression Refrigeration System Using Design of Experiments | C. Prabha, S.P. Arunkumar, K. Prabu | International Journal of Mechanical and Production Engineering Research and Development | August 2018; 8(4), pp.567-574. |
7 | Artificial Neural Network And Particle Swarm Optimization Hybrid Intelligence for Predicting Cutting Force During Hard Turning of H13 Tool Steel with Minimal Cutting Fluid Application | B. Anuja Beatrice, E. Kirubakaran, K. Leo Dev Wins & Vipin Gopan | International Journal of Mechanical and Production Engineering Research and Development | August 2018; 8(4), pp.891-900. |
8 | A review on biodiesel production, combustion, performance, and emission characteristics of non-edible oils in variable compression ratio diesel engine using biodiesel and its blends | M. Suresh, C.P. Jawahar, Arun Richard | Renewable and Sustainable Energy Reviews, September 2018; (92), pp.38-49. | |
9 | Sequestration of hydrogen sulfide and carbon dioxide from biogas | A.P. Pallan, S. Antony Raja, B. Sajeenabeevi and C.G. Varma | Emerging Trends in Engineering, Science and Technology for Society, Energy and Environment | 2018; pp.623-629. |
10 | Nallapaneni Manoj Kumar, “Usage of Parallel Manipulator for External Chest Compressions during Cardiopulmonary Resuscitation – an Experimental Study on Feedback Manikin | G. Babu Rao, M.Wilson Kumar, Mona Sahu, G. Anada Rao | International Journal of Mechanical Engineering and Technology | September 2018; 9(9), pp.990-998. |
11 | Life-Cycle Cost Comparison of Electric Boosted and Natural Gas Boosted Solar Water Heating Systems | Nallapaneni Manoj Kumar, G. Babu Rao, Kalakanda Alfred Sunny, H. M. Mahmudul | International Journal of Mechanical Engineering and Technology | September 2018; 9(9), pp.1263–1269 |
12 | Absorption refrigeration system using engine exhaust gas as an energy source | Sorawit Kaewpradub, Prawit Sanguanduean, Wattanapong Katesuwan, Nares Chimres, Phatthi Punyasukhananda, Lazarus Godson Asirvatham, Omid Mahian, Ahmet Selim Dalkilic,Somchai Wongwises | Case Studies in Thermal Engineering | September 2018; 12, pp.797-804. |
13 | Comparative Study of Conventionally Sintered Co-Ni-Al Alloy With Spark Plasma Sintered Alloy | G. Johnsy Arputhavalli, S. Agilan, M. Dinesh, S. J. Vijay, Roy Johnson | Science of Sintering | July-September 2018; 50(3) pp.337-345. |
14 | Evaluation of Hardness and Corrossion Behaviour of Al 7075⁄TiB2 ⁄ Cr2O3 Composite | Lijin George and D.S. Robinson Smart | International Journal of Mechanical and Production Engineering Research and Development | October 2018; 8(5), pp.291-298. |
15 | Optimum Concentration of Nanofluids for Heat Transfer Enhancement Under Cavity Flow Natural Convection with TiO2 – Water | Mohsen Sharifpura, A. Brusly Solomon, Tanja Linda Ottermanna, Josua P. Meyera | International Communications in Heat and Mass Transfer | October 2018; 98, pp. 297–303. |
16 | Study of Aluminium Alloy 7075 and Aluminium Alloy 8011 Friction Stir Welding | S. Balakrishnan, C. Krishnaraj, D. Emmanuel Sam Franklin, C. R. Raajeshkrishna | Journal of the Balkan Tribological Association | October 2018; 24(3), pp.148–156. |
17 | Experimental Analysis of Surface Roughness of Duplex Stainless Steel in Milling Operation | D. Philip Selvaraj | Advances in Manufacturing Processes, Lecture Notes in Mechanical Engineering | 2018; Part F7, pp. 373-382. |
18 | Optimization of surface Roughness of Duplex Stainless Steel in Dry Turning Operation using Taguchi Technique | D. Philip Selvaraj | Materials Physics and Mechanics | 2018; 40(1), pp.63-70. |
19 | Comparative Study of Cutting Fluid Application Methods to Improve Machining Conditions During Surface Grinding on AISI 1040 Steel | I.Kantharaj, M.Sekar, X. Ajay Vasanth and S.Mohanasundaram | Advances in Manufacturing Processes, Lecture Notes in Mechanical Engineering | 2018; Part F7, pp.71-79. |
20 | A Study on Friction Stir Welding of Al6061-ZrB2 Metal Matrix Composites | T. V. Christy, D. Emmanuel Sam Franklin, R. Nelson and S. Mohanasundaram | Advances in Manufacturing Processes, Lecture Notes in Mechanical Engineering | 2018; Part F7, pp.267-277 |
21 | Numerical Study on the Influence of Mass and Stiffness Ratios on the Vortex Induced Motion of an Elastically Mounted Cylinder for Harnessing Power | Vidya Chandran (RP15ME005), Sekar M., Sheeja Janardhanan, and Varun Menon | Energies | October 2018; 11(10), 2580. |
22 | Experimental Study of Thermophysical Properties of Graphene Water Nanofluid Below Boiling Temperature | Margret Johnson, Jefferson Raja Bose and John Livingston | International Journal of Mechanical Engineering and Technology | October 2018; 9(10), pp.1423–1433. |
23 | Effect of Friction Stir Processing and Hybrid Reinforcements on Copper | Titus Thankachan, K. Soorya Prakash and V. Kavimani | Materials and Manufacturing Processes | November 2018; 33(15), pp.1681-1692. |
24 | Mathematical modeling of the corrosion response of aluminium 5052/tungsten carbide/graphite hybrid composite | D.S. Ebenezer Jacob Dhas, C. Velmurugan | Materialwissenschaft und Werkstofftechnik | November 2018; 49(11), pp.1335-1345. |
25 | Combustion, performance, and emission analysis of diesel engine fueled with water-biodiesel emulsion fuel and nanoadditive | Suresh Vellaiyan, Arunkumar Subbiah, Prabha Chockalingam | Environmental Science and Pollution Research | November 2018; 25(33), pp.33478–33489. |
26 | Experimental Evaluation of Strength and Wear Rate of AA7075/TAC/Si3N4/Ti Nano Hybrid Metal Matrix Composite | J.Pradeep Kumar, D.S.Robinson Smart, Chithirai Pon Selvan | International Journal of Mechanical Engineering and Technology | November 2018; 9(11), pp.1690-1698. |
27 | Finite Element Analysis of Composites Under Different Load Conditions with the Effect of Hybridization of Glass Reinforcement on Kevlar Fibres | Anu Jacob Paul, S Darius Gnanaraj | International Journal of Mechanical Engineering and Technology | November 2018; 9(11), pp.446–454. |
28 | The evaluation of electromagnetic shielding properties of CFRP/metal mesh hybrid woven laminated composites | Tugirumubano, A., Vijay, S.J., Go, S.H., Shin, H.J., Ku, K.L., Kim, H.G | Journal of Composite Materials | November 2018; 52(27), pp.3819-3829. |
29 | Effect of Dry Sliding Wear Behavior of A356/TiB2 Aluminium Composite | S. Rajesh Ruban, T Anita Jones Mary Pushp, J David Raja Selvam, P.Shanmughasundaram | International Journal of Mechanical Engineering and Technology | November 2018; 9(11), pp.192-197. |
30 | Investigations on the Effect of Tungsten Carbide and Graphite Reinforcements during Spark Erosion Machining of Aluminium Alloy (AA 5052) Hybrid Composite | D. S. Ebenezer Jacob Dhas, C. Velmurugan, K. Leo Dev Wins | Silicon | November 2018; 10(6), pp. 2769–2781. |
31 | Enhancement of a Four Cylinder Hcng Mixed Fuel Engine with Control of Nox Emission Using Lean Burn Concept | M.Suresh, S.Mohanasundaram, Rajakumar S. Rai, K.Balasubramanian and S.S.Thipse | International Journal of Mechanical Engineering and Technology | November 2018; 9(11), pp.2206–2212. |
32 | Prediction and Experimental Validation of Peak Temperature in Friction Stir Welded AA2024 with AA5083 by Response Surface Methodology | R. Raja, Sabitha Jannet, D. Emmanuel Sam Franklin | Indian Journal of Science and Technology (WoS) | November 2018; 11(44), pp.1-7. |
33 | , "Effect of Nano TiO2 Particles on Microhardness and Microstructural Behaviour of AA7068 Metal Matrix Composites | K. John Joshua, S.J. Vijay, D. Philip Selvaraj | Ceramics International | December 2018; 44(17), pp. 20774-20781. |
34 | Predicting the effect of machining parameters on turning characteristics of AA7075/TiB2 in situ aluminum matrix composites using empirical relationships | A. Pugazhenthi, I. Dinaharan, G. Kanagaraj, J. David Raja Selvam | Journal of the Brazilian Society of Mechanical Sciences and Engineering | December 2018; 40(12) 555, pp. 1-15. |
35 | Etch Time Optimization in Bulk Silicon MEMS Devices Using a Novel Compensation Structure | Grace Jency, J, Sekar, M., Ravi Sankar, A | Lecture Notes in Electrical Engineering | 2018; 471, pp. 33-40. |
36 | Airfoil selection and computational study on the torque performance of 4-blade vertical axis wind turbine | Kalakanda Alfred Sunny, Pradeep Kumar, Nallapaneni Manoj Kumar, Joy Banerjee, G J Adheena | Journal of Physics: Conference Series | December 2018; 1139(1), 012040, pp.1-7. |
37 | Two Blade Vertical Axis Wind Turbine: Investigations on the Torque Generation at Different Rotational Velocities | Kalakanda Alfred Sunny, Pradeep Kumar, Nallapaneni Manoj Kumar, A. Veena, G J Adheena | IOP Conference Series: Materials Science and Engineering | December 2018; 455, pp.1-6. |
38 | Experimental Evaluation of Tensile Strength of GFRP Laminates with Silica and Study on their Drilling Behaviour | R.Raja, Sabitha Jannet, Rajesh Ruban S | International Journal of Mechanical Engineering and Technology | December 2018; 9(12), pp.1111-1118. |
39 | Design and fabrication of an automated seat pan and armrest height adjustable chair | Mona Sahu, Santhiyagu Joseph Vijay, Masepogu Wilson Kumar, Solomon, Darius Gnanaraj | International Journal of Mechanical Engineering and Technology (IJMET) | December 2018; 9(13), pp.45-53. |
40 | An Aluminium Hybrid Metal Matrix Composite Reinforced with TaC, Ti, Si3N4 Nanoparticles - A Review | J. Pradeepkumar, D. S. Robinson Smart, S. John Alexis | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | December 2018; Special Issue, pp.187-194. |
41 | Microstructural Characterization and Tensile Behavior of Rutile (TiO 2)-Reinforced AA6063 Aluminum Matrix Composites Prepared by Friction Stir Processing | Sahayam Joyson Abraham, Isaac Dinaharan, Jebaraj David Raja Selvam, and Esther Titilayo Akinlabi | Acta Metallurgica Sinica (English Letters) | January 2019; 32(1), pp 52–62. |
42 | Effect of tungsten carbide, silicon carbide and graphite particulates on the mechanical and microstructural characteristics of AA 5052 hybrid composites | D.S. Ebenezer Jacob Dhas, C. Velmurugan, K. Leo Dev Wins, K.P. BoopathiRaja | Ceramics International | January 2019; 45(1), pp.614-621. |
43 | Ergonomic Design and Rula Analysis of a Motorised Wheelchair for Disabled and Elderly | Bobby P Paul, Darius Gnanaraj S, Sam Paul | International Journal of Mechanical Engineering and Technology (IJMET) | January 2019; 10(1), pp.1014-1025. |
44 | Air Gasification of Char Derived from Pongamia De-Oiled Cake in a Fluidized Bed Reactor | Joseph John Marshal S, T. Michael N Kumar, Z. Robert Kennedy, Kondru Gnana Sundari | International Journal of Mechanical Engineering and Technology (IJMET) | January 2019; 10(1), pp. 1571–1580. |
45 | Sizing charts of helical capillary tubes used in refrigeration and air conditioning | Sukkarin Chingulpitak, Omid Mahian, Ahmet Selim Dalkilic, Lazarus Godson Asirvatham, Somchai Wongwises | Science and Technology for the Built Environment | January 2019; 25(1), pp.1–10 |
46 | Behaviour of Threaded Cylinder Tool in the Friction Stir Welding of Al-Zrb2 and Al-Sic Composite | P. Jayaseelan, T. V. Christy | International Journal of Mechanical Engineering and Technology (IJMET) | January 2019; 10(1), pp. 1751-1761 |
47 | Dry sliding wear behaviour of in-situ fabricated TiC particulate reinforced AA6061 aluminium alloy | J. David Raja Selvam, I. Dinaharan, Rajakumar S. Rai and P. M. Mashinini | Tribology-Materials, Surfaces & Interfaces | January 2019; 13(1), pp.1-11 |
48 | Influence of Electrode Surface Area on the Fractal Dimensions of Electrogastrograms and Fractal Analysis of Normal and Abnormal Digestion Process | Paramasivam, A., Kamalanand, K., Emmanuel, C., Mahadevan, B., Sundravadivelu, K., Raman, J., Jawahar, P.M. | Proceedings of the IEEE International Conference on Recent Trends in Electrical, Control and Communication | January 2019; , art. no. 8625668, pp. 245-250. |
49 | Multi-response optimization to improve the performance and emissions level of a diesel engine fueled with ZnO incorporated water emulsified soybean biodiesel/diesel fuel blends | Suresh Vellaiyan, Arunkumar Subbiah, Prabha Chockalingam | Fuel | February 2019; 237, pp.1013–1020 |
50 | Multi-response optimization to obtain better performance and emission level in a diesel engine fueled with water-biodiesel emulsion fuel and nanoadditive | Suresh Vellaiyan, Arunkumar Subbiah, Prabha Chockalingam | Environmental Science and Pollution Research | February 2019; 26 (5), pp. 4833-4841. |
51 | Investigation of graphene-reinforced magnesium metal matrix composites processed through a solvent-based powder metallurgy route | V Kavimani, K Soorya Prakash, Titus Thankachan | Bulletin of Materials Science | February 2019; 42(1), Article 39 |
52 | Evaluation of Tensile Strength and Corrosion Behaviour of Al 7075∕Tib2∕Cr2o3 Composite | Lijin George, D.S. Robinson Smart, Vishnu Haridas | International Journal of Mechanical Engineering and Technology (IJMET) | February 2019; 10(2), pp.59–68. |
53 | Friction Stir Welding on Dissimilar Alloys - A Critical Review | Vinoj K, Dr. R Raja | International Journal of Mechanical Engineering and Technology (IJMET) | February 2019; 10(2), pp.1406-1413 |
54 | Design of 1-V, 12-bit low power incremental delta sigma ADC for CMOS image sensor applications | Shylu Sam, D.S., Radha, S., Jackuline Moni, D., Sam Paul, P., Jecintha, J. | International Journal of Recent Technology and Engineering | February 2019; 7(5), pp. 249-254. |
55 | Novel Solid-State Metal Additive Manufacturing Technique: Experiments and Investigations | P. Ramkumar, S. J. Vijay and S. Mohanasundaram | International Journal of Mechanical Engineering and Technology (IJMET) | February 2018; 10(2), pp.809-816. |
56 | Tensile and Wear Behaviour of Aluminium Alloy LM6 Reinforced with Magnesium and Copper | G. Prabhu Rubesh, P. Jayaseelan, Mona Sahu | Journal of Computational and Theoretical Nanoscience | February 2019; 16(2), pp.725–728. |
57 | Behaviour of Threaded Cylinder Tool in the Friction Stir Welding of Al–ZrB2 Composite | P. Jayaseelan, T.V. Christy, G. Prabhu Rubesh, R. Srinivasan | Journal of Computational and Theoretical Nanoscience | February 2019; 16(2), pp.719–724. |
58 | Experimental investigation on the mechanical properties of LM6 aluminum alloy reinforced with boron carbide and titanium hybrid composites | Prabu Rubesh George, I. Kantharaj, S. Mohanasundaram, G. Babu Rao, Hiran Gabriel | International Journal of Mechanical Engineering and Technology | February 2019; 10(2), pp.1584-1593. |
59 | Synthesis and Characterization of SiC/Al2O3 Reinforced AA5083 Metal Matrix Composite by Friction Stir Processing | Sabitha Jannet, R. Raja, Maialen Gonzalez Jaio, Morish Manohar B | International Journal of Recent Technology and Engineering (IJRTE) | March 2019; 7(6), pp.629-634 |
60 | Design of low power 4-bit Flash ADC in 90nm CMOS Process | Shylu, D.S., Radha, S., Sam Paul, P., Sudeepa, P.S. | 2nd International Conference on Signal Processing and Communication, ICSPC 2019 - Proceedings | 2019; art. no. 8976538, pp. 252-257. |
61 | Influence of magnetorheological elastomer on tool vibration and cutting performance during boring of hardened AISI4340 steel | Lawrance G, Sam Paul P, Ajay Vasanth X, Varadarajan A and Daniel E | Journal of Mechanical Science and Technology | April 2019, 33(4), pp.1555~1561. |
62 | Microstructural characterization and tensile behavior of friction stir processed AA6061/Al2Cu cast aluminum matrix composites | I. Dinaharan, M. Balakrishnan, J. David Raja Selvam, E.T. Akinlabi | Journal of Alloys and Compounds | April 2019; 781, pp.270-279 |
63 | Microstructural characterization of vanadium particles reinforced AA6063 aluminum matrix composites via friction stir processing with improved tensile strength and appreciable ductility | Sahayam Joyson Abraham, Isaac Dinaharan, Jebaraj David Raja Selvam, Esther Titilayo Akinla | Composites Communications | April 2019; 12, pp.54-58. |
64 | Experimental investigations on wear and friction behaviour of SiC@r-GO reinforced Mg matrix composites produced through solvent-based powder metallurgy | Kavimani, V., Prakash, K.S., Thankachan, T | Composites Part B: Engineering | April 2019; 162, pp.508-521. |
65 | Prediction of surface roughness and material removal rate in wire electrical discharge machining on aluminum based alloys/composites using Taguchi coupled Grey Relational Analysis and Artificial Neural Networks | Titus Thankachan, K. Soorya Prakash, R Malini, S. Ramu, Prabhu Sundararaj, Sivakumar Rajandran, Devaraj Rammasamy, Sathiskumar Jothi | Applied Surface Science | April 2019, 472, pp.22-35. |
66 | Heat Transfer Performance of a compact loop heat pipe with alumina and silver Nanofluid: A comparative study | Emerald Ninolin Stephen, Lazarus Godson Asirvatham, Ramachandran Kandasamy, Brusly Solomon, Gnana Sundari Kondru | Journal of Thermal Analysis and Calorimetry | April 2019; 136(1), pp.211–222. |
67 | Characterization of Al–Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and tribological behaviour | G Prabhu Rubesh, A Ramesh, D S Ebenezer Jacob Dhas and Titus Thankachan | IOB Publishing, Materials Research Express | April 2019; 6(7), 076537. |
68 | Advances in nano instrumentation systems and computational techniques | Kamalanand, K., Najumnissa Jamal, D., Mannar Jawahar, P. | Advances in Nano Instrumentation Systems and Computational Techniques | April 2019; pp. 1-170. |
69 | Prediction of performance and emission characteristics of diesel engine fuelled with waste biomass pyrolysis oil using response surface methodology | R. Sakthivel, K. Ramesh, S. Joseph John Marshal, Kishor Kumar Sadasivuni | Renewable Energy | June 2019; 136, pp.91-103. |
70 | Effect of uniform/non-uniform magnetic field and jet impingement on the hydrodynamic and heat transfer performance of nanofluids | Rajesh Nimmagadda, Herman D. Haustein, Lazarus Godson Asirvatham, Somchai Wongwises | Journal of Magnetism and Magnetic Materials | June 2019; 479, pp.268–281. |
71 | Performance prediction of hybrid thermoelectric generator with high accuracy using artificial neural networks | Appadurai Anitha Angeline, Lazarus Godson Asirvatham, Duraisamy Jude Hemanth, Jayaraj Jayakumar, Somchai Wongwises | Sustainable Energy Technologies and Assessments | June 2019; 33, pp.53–60. |
72 | Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics | V. Kavimani, K. Soorya Prakash, Titus Thankachan | Composites Part B: Engineering | June 2019; 167, pp.621-630. |
73 | Investigation of Mechanical Properties and Machining Behaviour of Aluminium Alloy Filled with Walnut Cell Micro Particles | C. M. Anand Partheeban, M. Rajendran | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | June 2019; 9(3), pp.485-494. |
74 | Mechanical and Microstructural Evaluation of AA5083 Matrix Reinforced with SiC/B4C Particles by Stir Casting Technique | R Raja, Sabitha Jannet, S Rajesh Ruban, Nikolaus Romanov, Morish Manohar | International Journal of Engineering and Advanced Technology (IJEAT) | June 2019; 8(5), pp. 825-828. |
75 | Design and thermal validation of four wheeler disc brake using different material | Purusothaman, M., Sunil Kumar, M., Praveen Kumar, V., Kumar, S., Senthamizh Selvan, S. | International Journal of Innovative Technology and Exploring Engineering | June 2019; 8 (8), pp. 1739-1744 |
76 | Improvement of Machining Characteristics by EDM with Graphite Powder Mixed Dielectric Medium | V.Srinivasa Sai, K.Gnana Sundari, P.Gangadhara Rao and B. Surekha | Lecture notes in Mechanical Engineering, Advances in Manufacturing Technology | 2019, pp.41-48 |
S.no | Jul 2017 - Jun 2018 | Author's Name | Journal Name | Year, Volume, Issue, Page No |
---|---|---|---|---|
1 | Air-Side Performance of a Micro-Channel Heat Exchanger in Wet Surface Conditions | Raviwat Srisomba, Lazarus Godson Asirvatham, Omid Mahian, Ahmet Selim Dalkilic, Mohamed M.Awad, and Somchai Wongwises | Thermal Sciences | January 2017; 21(1) pp.375-385 |
2 | Heat pipe with nano enhanced-PCM for electronic cooling application | Jogi Krishna, P.S. Kishore,A. Brusly Solomon | Experimental Thermal and Fluid Science | February 2017, Volume 81, pp. 84-92, ISSN 0894-1777 |
3 | In situ Formation of ZrB 2 Particulates and their Influence on Microstructure and Tensile Behavior of AA7075 Aluminum Matrix Composites | J. David Raja Selvam,I. Dinaharan | Engineering Science and Technology, an International Journal, Elsevier | February 2017; 20 (1), pp. 187–196 |
4 | Entropy Generation Analysis of a Miniature Loop Heat Pipe with Graphene-Water Nanofluid: Thermdynamics model and Experimental Study | Trijo Tharayil, Lazarus Godson Asirvatham, Micheal Jerome Dau, Somchai Wongwises | International Journal of Heat and Mass Transfer, Elsevier | March 2017; 106, pp.407-421 |
5 | Measurement of Thermophysical Properties of Al2O3/glycerin(G13) Nanofluid for Automotive Radiator Cooling Applications | Kondru Gnana Sundari, Lazarus Godson Asirvatham, T.Michael N.Kumar and Nizar Ahammed | Research Journal of Chemistry and Environment | March 2017; 21(3), pp.17-24 |
6 | The Effect of Cutting Parameters on Tool Vibration During Magnetorheological Fluid Controlled Turning Bar | P. Sam Paul,Kolhar Sudeep Sunil, A.S. Varadarajan | International Journal of Acoustics and Vibration, IJAV | March 2017; 21(1), pp.27-33 |
7 | Characterisation of a grooved heat pipe with an anodised surface | A. Brusly Solomon A. M. Ram Kumar, K. Ramachandran, B. C. Pillai, C. Senthil Kumar, Mohsen Sharifpur, Josua P. Meyer | Heat Mass Transfer | March 2017; 53: pp.753–763. |
8 | Corrosion behaviour of Aluminium Metal Matrix reinforced with Multi-wall Carbon Nanotube | P.S. Samuel Ratna Kumar,D.S. Robinson Smart, S. John Alexis | Journal of Asian Ceramic Societies, IACS | March 2017, 5 (2017), pp.71-75 |
9 | A Review on Turbines for Micro Hydro Power Plant | C.P. Jawahar,Prawin Angel Michael | Renewable and Sustainable Energy Reviews | 2017; Vol 72, Pages 882-887 |
10 | Effect of short glass fibre and fillers on friction and wear performance of multi-phased thermoplastic copolyester elastomer composites | Hemanth J, Suresha B Sekar M. | Int. J. Nanotechnol. | 2017; Vol. 14, No. 9-11, pp.893-906. |
11 | Design of 15 kW Micro Hydro Power Plant for Rural Electrification at Valara | Prawin Angel Michael,C.P. Jawahar | International Journal of Energy Procedia | June 2017; 117, pp.163-171. |
12 | Experimental Investigation on Performance and Emission Characteristics of a Common Rail Direct Injection Engine Using Animal Fat Biodiesel Blends | V.K. Shahir,C.P. Jawahar, P.R. Suresh, V. Vinod | Energy Procedia | June 2017; 117, pp.283-290. |
13 | Power Generation Enhancement with Hybrid Thermoelectric Generator using Biomass Waste Heat Energy | Appadurai Anitha Angeline, Jayaraj Jayakumar,Lazarus Godson Asirvatham,Joseph John Marshal,Somchai Wongwise | International Journal of Experimental Thermal and Fluid Science | July 2017, 85, pp.1-12 |
14 | Prediction of fusion-based tool wear with signals from inbuilt sensor turning tool | Sam Paul, P., Shylu, D.S., Varadarajan, A.S. | International Journal of Advanced Mechatronic Systems | 2017; (6), pp. 368-377. |
15 | Optimal synthesis and kinematic analysis of adjustable four-bar linkages to generate filleted rectangular paths’, International Journal of Mechanics Based Design of Structures and Machines | G. Ganesan and M. Sekar | 42917 | 45 (3), pp.363-379. |
16 | Microstructure Analysis Of Friction Stir Welded AA 5083 and AA6061 T6 Aluminum Alloys | Sabitha Jannet, R.Raja | International Journal of Mechanical Engineering and Technology (IJMET) | July 2017; Volume 8, Issue 7, pp 328-333 |
17 | Performance of cylindrical and flattened heat pipes at various inclinations including repeatability in anti-gravity – A comparative study | Trijo Tharayil,L. Godson Asirvatham, Catrina Cassie and Somchai Wongwises | Applied Thermal Engineering | July 2017; 122(25), pp. 685-696 |
18 | Effect of blast pressure on discrete models using a shock tube | Sundararaj, A.J., Jose, D., Sunny, A., John, S.T., Kumar, N., Gopalsamy | Proceedings of the International Conference on Recent Advances in Aerospace Engineering, ICRAAE 2017 | February 2018; art. no. 8297238 |
19 | Investigation of microstructure and mechanical properties of AA7068 reinforced with MgO prepared using powder metallurgy | K. J. Joshua, S. J. Vijay, P. Ramkumar, D. Philip Selvaraj and H. G. Kim | IEEE Xplore | July 2017; pp. 1-6. |
20 | Numerical study on convective heat transfer characteristics of silver/water nanofluid in mini-channel | Jefferson Raja Bose, L. Godson Asirvatham,T. Michael N Kumar and Somchai wongwises | Current Nanoscience | August 2017; 13(4), pp.426-434 |
21 | Experimental Investigation of Thermo-Physical Properties of Al2O3 Nanofluid on Commercially Available Blue Dyed Kerosene for low Volume Concentration | Aldin Justin Sundararaj, B.C. Pillai, Lazarus Godson Asirvatham, A.N. Subash, Kirthana Stephen | International Journal of Nano Hybrids and Composites | August 2017, 17, pp 156-165 |
22 | Modal Analysis of MWCNT Reinforced AA5083 Composite Material | P.S.Samuel Ratna Kumar, D.S.Robinson Smart, S.John Alexis, N.Sangeetha, S. Ramanathan | International Journal of Civil Engineering and Technology (IJCIET) | September 2017; 8(9), pp.167–177. |
23 | Effect of heat treatment on acoustic emission signals during turning of hardened steel | P. Sam Paul, Fernando Winston Raj | Romanian Journal of Acoustics and Vibration | September 2017; 14(1), pp.38-43. |
24 | Effect of Bearings on Vibration in Rotating Machinery | Rudrapati Victor Daniel, Savale Amit Siddhappa, Savale Bhushan Gajanan, S. Vipin Philip ,P. Sam Paul | IOP Conference Series: Materials Science and Engineering | September 2017; 225(1), pp.1-5. |
25 | Study on the influence of magnetorheological fluid on tool vibration during end milling process | P. Sam Paul, C. K. Shobhan Kumar, Melvin Joshua, S. Vignesh, S. Saravanan, A. S. Varadarajan | International Journal of Dynamics and Control | September 2017; 7(3), pp.696-703. |
26 | Uniform Corrosion Behavior of AA7075 with Nanoclay | P.S.Samuel Ratna Kumar, S.John Alexis, D.S.Robinson Smart | Materials Today: Proceedings | October 2017; 4(8), pp.9013–9019. |
27 | Optimization of Cutting force of Duplex Stainless steel in dry Milling Operation | D. Philip Selvaraj | Materials Today: Proceedings | October 2017; 4(8), pp.11141–11147. |
28 | Influence of MgO particles on Microstructural and Mechanical Behaviour of AA7068 Metal Matrix Composites | K. John Joshua, S.J. Vijay, D. Philip Selvaraj, P.Ramkumar | IOP Conf. Series: Materials Science and Engineering | October 2017; 247, pp.1-8 |
29 | Machining Chatter analysis for High Speed Milling Operations | M. Sekar, I. Kantharaj and Savale Amit Siddhappa | IOP Conf. Series: Materials Science and Engineering | October 2017; 247, pp.1-11 |
30 | Optimization of Internal Grinding process Parameters on C40E Steel using Taguchi Technique | S. Jeevanantham, N.M. Sivaram, D.S. Robinson Smart and S. Nallusamy | International Journal of Applied Engineering Research | October 2017; 12(19), pp.8660-8664. |
31 | Experimental Convective Heat Transfer Studies on Graphene Nanofluid for the Cooling of Next Generation Electronic Components | B. Jefferson Raja Bose, L. Godson Asirvatham and Michael N Kumar | International Journal of Applied Engineering Research | October 2017; 12(19), pp.8534-8539 |
32 | Production of biogas from various biomass waste | Prabhu, A.V., Raja, S.A., Lee, C.L.R., Jeba, P. | Pakistan Journal of Biotechnology | October 2017; 14(3), pp. 437-442. |
33 | Attenuation of Vibration in Boring Tool using Spring Controlled Impact Damper | G. Lawrance, P. Sam Paul, A.S. Varadarajan, A. Paul praveen, X. Ajay Vasanth | International Journal on Interactive Design and Manufacturing | October 2017; 11(4), pp.903-915. |
34 | Design of Smooth Ramp Feedrate for Machining Complex NURBS Paths | M. Sekar, B. Suresha and I. Kantharaj | IOP Conf. Series: Materials Science and Engineering | October 2017; 247, pp.1-9 |
35 | Experimental study on the influence of the aspect ratio of square cavity on natural convection heat transfer with Al2O3/Water nanofluids | A. Brusly Solomon, Josh van Rooyen, Martin Rencken,M. Sharifpur,Josua P. Meyer | International Communications in Heat and Mass Transfer | November 2017; 88, pp.254-261. |
36 | Experimental Investigation of High Speed Drilling of Glass Fiber Reinforced plastic (GFRP) Composite Laminates made up of Different Polymer Matrices | R. Raja, Sabitha Jannet | International journal of mechanical and production Engineering Research and Development (IJMPERD) | December 2017; 7(6), pp.351-358 |
37 | Reduction of discomfort in pushing an industrial trolley using ergonomics | M Wilson Kumar, S J Vijay, K L Vasudev and S Darius Gnanaraj | IOP Conf. Series: Materials Science and Engineering | December 2017; 263(6),062042, pp.1-9 |
38 | , “Experimental Investigation of High Speed Drilling on GFRP/Aluminium Multi Material | R. Raja, V. Krishnaraj and Sabitha Jannet | Indian Journal of Science and Technology | December 2017; 10(47), pp.1-9. |
39 | Holistic Scrubber for the Purification of Biogas from Community and Household Digesters | Antony P. Pallan, S. Antony Raja, C. G. Varma, Deepak Mathew D. K. | International Review of Mechanical Engineering (I.RE.M.E.) | January 2018; 12(1), pp.9-17. |
40 | Optimization of a HMM-based hand gesture recognition system using a hybrid cuckoo search algorithm | Sagayam, K.M., Hemanth, D.J., Vasanth, X.A., Henesy, L.E., Ho, C.C, | Hybrid Metaheuristics for Image Analysis | January 2018; pp.87-114. |
41 | Effect of Nanoparticle Coating on the Performance of a Miniature Loop Heat Pipe for Electronics Cooling Applications | Trijo Tharayil, Lazarus Godson Asirvatham, S. Rajesh and Somchai Wongwises | ASME Journal of Heat Transfer | February 2018; 140(2), PP.022401-9. |
42 | Experimental Investigations of Nitrogen Alloyed Duplex Stainless Steel In Dry Milling Process | D.Philip Sevaraj, P.Chandramohan, P.Chandrasekar | Journal of Engineering Science and Technology | February 2018; 13(2), pp.321-331. |
43 | Evaluation of Mechanical Properties of AL-6061 Reinforced with ZrB2 -Sic Hybrid Metal Matrix Composites | S. Rajesh Ruban, K. Leo Dev Wins, Dr. M. Mahendra Boopathi, A. Arun Richard | International Journal of Mechanical Engineering and Technology | February 2018; 9(2), pp.88-94. |
44 | Investigations on mechanical behaviour of LM 13/SiC/Gr hybrid composite using compocasting method | J. E. D. Praveen, D. S. Robinson Smart, R. Babu, S. Rajesh Ruban and N. Gnanaprakash | IEEE Xplore | February 2018, pp. 1-6. |
45 | Shape optimization of submersible pump impeller design | Joe Ajay , S. Elizabeth Amudhini Stephen , D. S. Robinson Smart | IEEE Xplore | February 2018; pp. 1-6. |
46 | Influence of combustion chamber pressure on injector performance | Adheena, G.J., Sunny, K.A., Vasanth, A., Kumar, N.M. | International Journal of Mechanical Engineering and Technology | February 2018; 9(2), pp. 810-820. |
47 | Effect of reynolds number and weber number on the estimation of droplet size for an injector | Adheena, G.J., Sunny, K.A., Justin, A., Kumar, N.M. | International Journal of Mechanical Engineering and Technology | March 2018, 9(3), pp. 382-391 |
48 | A study on characteristics of parameters influencing internal grinding process with MRR | Jeevanantham, S., Sivaram, N.M, Smart, D.S.R., Shanmughasundaram, P., Prabu, N.M. | ARPN Journal of Engineering and Applied Sciences | March 2018; 13(6), pp.2316-2321. |
49 | Convective heat transfer analysis of Refined Kerosene with alumina particles for rocketry application | Aldin Justin Sundararaj, B.C.Pillai and Lazarus Godson Asirvatham | Journal of Mechanical Science and Technology | April 2018; 32(4), pp.1685–1691 |
50 | Assessment Of Cable Tension Using Vibration Based Methodologies For Wireless Structural Health Monitoring | S.Nancy Debora, R. Raja, Sabitha jannet, Rishipal Reddy, J Jackson Vasanth,U Abhijit Menon | International Journal of Mechanical and Production Engineering Research and Development, (IJMPERD) | April 2018; 8(2), pp.575-582 |
51 | Effectiveness of particle and mass impact damping on tool vibration during hard turning process | P Sam Paul, Prashanth Raja, Philip Aruldhas, Sam Pringle and Elvin Shaji | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | April 2018; 232(5), pp.776-786. |
52 | Experimental Investigation on thin Sheets of SS316l in Gas Tungsten ARC Welding Process | J. Anthuvan stephen edberk, J. Phillip winston, S. Jervis solomon, E. Samuel Jenson and J. Joel sagayaraj | International Journal of Mechanical and Production Engineering Research and Development, (IJMPERD) | April 2018; 8(2), pp.873-878. |
53 | A Study on Weld Quality Characteristics of Plasma ARC Welding of Hastelloy C-276 Sheets | Jobin George & J. Anthuvan stephen edberk | International Journal of Mechanical and Production Engineering Research and Development, (IJMPERD) | April 2018; 8(2), pp.1215-1220 |
54 | Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials | Sudhan Raj Jeganmohan, Darius Gnanaraj Solomon, T. V. Christy | Tribology - Materials, Surfaces & Interfaces | April 2018; 12(2), pp.71-84. |
55 | Near Perfect Path Generation of Corners Chamfered Rectangle and Single Synthesis Cam-Link Mechanism to Generate Special-Slot Path | G. Ajith Kumar, G. Ganesan, and M. Sekar | International Journal of Mechanics Based Design of Structures and Machines | April 2018; 46(4), pp.483-498. |
56 | Synthesis and characterization of AA5083 and AA2024 reinforced with SiO2 particles | R. Raja, S. Jannet, and M.A. Thampy | Bulletin of the Polish Academy of Sciences: Technical Sciences | April 2018; 66(2), pp.127-132. |
57 | Experimental study of condensation heat transfer on hydrophobic vertical tube | Mattacaud Ramachandralal Rajkumar, Arjunan Praveen, Radhakrishnan Arun Krishnan, Lazarus Godson Asirvatham, Somchai Wongwises | International Journal of Heat and Mass Transfer | May 2018; 120, pp.305-315 |
58 | Microstructure Evolution and Mechanical Characterization of Friction Stir Welded Titanium Alloy Ti–6Al–4V using Lanthanated Tungsten Tool | P.M. Mashinini, I. Dinaharan, J. David Raja Selvam, D.G. Hattingh | Materials Characterization | May 2018; 139, pp.328-336. |
59 | Investigations of Effect of Rotary EDM Electrode on Machining Performance of Al6061 Alloy | D S Robinson Smart, Joses Jenish Smart , C Periasamy , P S Samuel Ratna Kumar | IOP Conference Series: Materials Science and Engineering | 2018; (346) |
60 | Evaluation of Mechanical Properties of MWCNT / Nanoclay Reinforced Aluminium alloy Metal Matrix Composite | P S Samuel Ratna Kumar, D S Robinson Smart and S John Alexis | IOP Conference Series: Materials Science and Engineering | 2018; (346) |
61 | Investigation of Mechanical and Electromagnetic Interference Shielding Properties of Nickel–CFRP Textile Composites | Tugirumubano, A., Vijay, S.J., Go, S.H., Kwac, L.K., Kim, H.G | Journal of Materials Engineering and Performance | May 2018; 27(5), pp.2255-2262. |
62 | Power Generation from Combusted “Syngas” Using Hybrid Thermoelectric Generator and Forecasting the Performance with Ann Technique | Appadurai Anitha Angeline, Jayaraj Jayakumar, Lazarus Godson Asirvatham, Somchai Wongwises | Journal of Thermal Engineering | June 2018; 4(4), pp.2149-2168. |
63 | Experimental Investigation on the Performance of a Parallel Plate-Based Active Magnetic Regenerator | Thawatchai Keawkamrop, Ahmet Selim Dalkilic, Lazarus Godson Asirvatham, Jafar Amani, Omid Mahian | International Journal of Air-Conditioning and Refrigeration | June 2018; 26(2), pp.1850018-(1-10). |
64 | Wear Rate Prediction of Friction Stir Welded Dissimilar Aluminum Alloy by Ann | R Raja | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | June 2018; 8(3), pp.887-892. |
65 | Manufacture and characterization of a novel agro-waste based low cost metal matrix composite (MMC) by compocasting | Jerin Jose, T V Christy, P Eby Peter, John A Feby, Alan Joseph George, Joepaul Joseph, R Gautham Chandra and Nevin Mathew Benjie | Materials Research Express | June 2018; 5(6), pp.066530. |
66 | Image Processing Based Tailor-Made Software Package for the Condition Monitoring of Grinding Wheel | Vipin Gopan, K. Leo Dev Wins, Arun Surendran | International Journal of Mechanical and Production Engineering Research and Development | June 2018; 8(3), pp.825-834. |
67 | Scope for Data enabled Infrastructure in Petrochemical Industries: A Solution to Midstream Operating Challenges | J. Pradeep Kumar, V.S. Lakshmi Ravuri, B. Saritha, Jayanna Kanchikere, T. Sreenivasulu, G. Babu Rao | International Journal of Mechanical Engineering and Technology | June 2018; 9(6), pp.490-495. |
68 | Experimental Investigations of Effect of Heated Abrasives on Abrasive Jet Coating Removal Rate on the Soft Base Materials | Balasubramanian. K, D. S. Robin Smart, John Vimal | International Journal of Mechanical and Production Engineering Research and Development | June 2018; 8(3), pp.575-582. |
69 | Al2O3 Nano Particles in Automobile Cooling System-A Review | Kondru Gnana Sundari, Lazarus Godson Asirvatham, T. Michael N Kumar, K. Sai Ramya and Joseph John Marshal | Journal of Advanced Research in Dynamical and Control Systems | 2018; 10(3),pp.1-9. |
70 | Mathematical analysis on the effect of tin on mechanical, electrical and thermal properties in magnesium-tin alloys | Titus Thankachan, K.Sooryaprakash, C.Saranya, V.Inigovalan | Materials Discovery | June 2018; 12, pp.55-62. |
S.no | 2000 - 2017 | Author's Name | Journal Name | Year, Volume, Issue, Page No |
---|---|---|---|---|
1 | Performance analysis of (Bi2 Te3 -PbTe) hybrid thermoelectric generator | Angeline, A.A., Jayakumar, J., Asirvatham, L.G. | International Journal of Power Electronics and Drive Systems | June 2017; 8(2), pp. 917-925. |
2 | Thermal performance of a vapor chamber for electronic cooling applications | Bose, J.R., Ahammed, N., Asirvatham, L.G. | Journal of Mechanical Science and Technology | April 2017; 31(4), pp.1995-2003. |
3 | Development of single and multi-jet conical nozzle based open jet facility for cold jet simulation | Sunny, K.A., Kumar, N.M., Justin, A., Harithra, M | Advances in Intelligent Systems and Computing | 2018; 632, pp. 309-322 |
4 | Computational analysis of three blade vertical axis wind turbine | Sunny, K.A., Kumar, P., Kumar, N.M., Priscilla, S. | Progress in Industrial Ecology | 2018; 12(1-2), pp. 120-137 |
5 | Experimental Study of Thermal Energy Storage Characteristics using Heat Pipe with Nano-Enhanced Phase Change Materials | Krishna, J., Kishore, P.S., Brusly Solomon, A | IOP Conference Series: Materials Science and Engineering | September 2017; 225(1),012058 |
6 | ., "Investigation on wear behaviour of lm13/sic aluminium metal matrix composites by response surface methodology | Praveen, J.E.D., Robinson Smart, D.S., Babu, R., Vijin Prabhu, A | International Journal of Mechanical Engineering and Technology | 8(6), pp. 530-543, 2017. |
7 | Mechanical characterization of graphite and CNT reinforced aluminium-5083 | Smart, D.S.R., Johns, N.P., Smart, J.J. | Materials Science Forum | 889 MSF, pp. 56-62, 2017. |
8 | Effect of machining parameters on MRR and surface roughness in internal grinding using EN8, EN31 steel | Jeevanantham, S., Robinson Smart, D.S., Sivaram, N.M., Nallusamy, S., Manikanda Prabu, N. | International Journal of Applied Engineering Research | 12(11), pp. 2963-2968, 2017. |
9 | Performance enhancement of a two-phase closed thermosiphon with a thin porous copper coating | Brusly Solomon, A., Arul Daniel, V., Ramachandran, K., (...), Sharifpur, M., Meyer, J.P. | International Communications in Heat and Mass Transfer | 82, pp. 9-19, March 2017. |
10 | A Study on Characteristics of Parameters Influencing Internal Grinding Process with MRR | Jeevanantham, S., David Rathnaraj, J., Robinson Smart, D.S., Nallusamy, S., Manikanda Prabu, N. | Indian Journal of Science and Technology | 9(37),101134, October 2016. |
11 | Application of heuristic techniques and effect of process parameter on turning and facing operation-a review | Babu, R., Robinson Smart, D.S., Mahesh, G., Smart, J.J. | ARPN Journal of Engineering and Applied Sciences | 11(7), pp. 4272-4283, April 2016. |
12 | Microstructure and wear characterization of aluminum matrix composites reinforced with industrial waste fly ash particulates synthesized by friction stir processing | Dinaharan, I., Nelson, R., Vijay, S.J., Akinlabi, E.T. | Materials Characterization | 118, pp. 149-158, August 2016. |
13 | Preliminary investigations on an air-cooled based low temperature flash evaporation desalination system for small-scale applications | Jims John Wessley, G., Jawahar, C.P., Koshy Mathews, P. | Desalination and Water Treatment | 57(34), pp. 15735-15739, July 2016. |
14 | Microstructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate | LIJAY, K.J., SELVAM, J.D.R., DINAHARAN, I., VIJAY, S.J. | Transactions of Nonferrous Metals Society of China | 26(7), pp. 1791-1800, 2016. |
15 | Fixed bed pyrolysis of Pongamia non edible oil seed cake: Characterization of char, oil and gas obtained at low heating rate | Marshal S, J.J., Kumar, T.M.N. | International Journal of Applied Engineering Research | 11(8), pp. 5826-5833, 2016. |
16 | Microstructure and Mechanical Characterization of Aluminum Seamless Tubes Produced by Friction Stir Back Extrusion | Mathew, N., Dinaharan, I., Vijay, S.J., Murugan, N. | Transactions of the Indian Institute of Metals | 69(10), pp. 1811-1818, December 2016. |
17 | Comparison of surface roughness and chip characteristics obtained under different modes of lubrication during hard turning of AISI H13 tool work steel. | Raj, A., Wins, K.L.D., Varadarajan, A.S. | IOP Conference Series: Materials Science and Engineering | 149(1),012017, October 2016. |
18 | Evaluation of the performance during hard turning of OHNS steel with minimal cutting fluid application and its comparison with minimum quantity lubrication | Raj, A., Wins, K.L.D., Varadarajan, A.S. | IOP Conference Series: Materials Science and Engineering | 149(1),012021, October 2016. |
19 | Effect of dry sliding wear behaviour of AA6061/ZrB2 /SiC Hybrid Composite | Rajesh Ruban, S., Leo Dev Wins, K., David Raja Selvam, J., Arun Richard, A. | International Journal of Vehicle Structures and Systems | 8(2), pp. 108-111, 2016. |
20 | Investigation of effect of damping of the work piece on coating removal rate and surface roughness during the shot blasting process | Robinson Smart, D.S., Balasubramanian, K., Smart, J.J. | ARPN Journal of Engineering and Applied Sciences | 11(3), pp. 1961-1965, 2016. |
21 | Study on the influence of fluid application parameters on tool vibration and cutting performance during turning of hardened steel | Sam Paul, P., Varadarajan, A.S., Robinson Gnanadurai, R | Engineering Science and Technology, an International Journal | 19(1), pp. 241-253, March 2016. |
22 | Influence of fly ash particles on dry sliding wear behaviour of AA6061 aluminium alloy | Selvam, J.D.R., Smart, D.S.R., Dinaharan, I. | Kovove Materialy | 54(3), pp. 175-183, 2016. |
23 | Analytical expression for thermal conductivity of heat pipe | Solomon, A.B., Sekar, M., Yang, S.H. | Applied Thermal Engineering | 100, pp. 462-467, May 2016. |
24 | Vertical Axis Wind Turbine: Aerodynamic Modelling and its Testing in Wind Tunnel | Sunny, K.A., Kumar, N.M | Procedia Computer Science | 93, pp. 1017-1023, September 2016. |
25 | Design and analysis of dynamic electromagnetic suspension system for improved vehicle stability | Suresh, M., Walter Karg, R., Rohith Renish, R., Nemani, V. | ARPN Journal of Engineering and Applied Sciences | 11(2), pp. 1252-1257, 2016. |
26 | Investigation on the effect of cooling of the tool using heat pipe during hard turning with minimal fluid application | Robinson Gnanadurai, R., Varadarajan, A.S. | Engineering Science and Technology, an International Journal | Volume 19, Issue 3, 1 September 2016, Pages 1190-1198 |
27 | The effect of an auxiliary pulsing jet of cutting fluid on cutting performance during hard turning with minimal fluid application | Robinson Gnanadurai, R., Varadarajan, A.S. | International Journal of Machining and Machinability of Materials | 2012 12(4), pp. 321-336 |
28 | Entropy generation analysis of graphene–alumina hybrid nanofluid in multiport minichannel heat exchanger coupled with thermoelectric cooler | Ahammed, N., Asirvatham, L.G., Wongwises, S. | International Journal of Heat and Mass Transfer | 103, pp. 1084-1097, December 2016. |
29 | Packaging in MEMS piezoresistive accelerometers: A review | Grace Jency, J., Sekar, M., Ravi Sankar, A. | International Journal of Mechanical Engineering and Technology | 2017; 8(8), pp.685-693. |
30 | Abrasive wear behaviour of thermoplastic copolyester elastomer composites: A statistical approach | Rajashekaraiah, H.a, Bheemappa, S.b, Yang, S.-H.c, Mohan, S. | International Journal of Precision Engineering and Manufacturing | June 2016; 17(6), pp.755-763. |
31 | Physico-mechanical behaviour of thermoplastic co-polyester elastomer/polytetrafluroethylene composite with short fibers and microfillers | Hemanth, R., Suresha, B., Sekar, M. | Journal of Composite Materials | Volume 49, Issue 18, 2015, Pages 2217-2229. |
32 | Design and implementation of high-performance real-time free-form NURBS interpolator in micro cnc machine tool | Sekar, M., Han, Y.S. | Mechanics Based Design of Structures and Machines | July 2014; Volume 42, Issue 3, Pages 296-311 |
33 | Dynamic mechanical analysis and three-body abrasive wear behaviour of thermoplastic copolyester elastomer composites | Rajashekaraiah, H., Mohan, S, Pallathadka, P.K., Bhimappa | Advances in Tribology | Volume 2014, 2014, Article number 210187 |
34 | Effect of filling ratio on the performance of a novel miniature loop heat pipe having different diameter transport lines | Tharayil, T., Asirvatham, L.G., Ravindran, V., Wongwises, S. | Applied Thermal Engineering | 106, pp. 588-600, August 2016. |
35 | Comparative study of the effect of hybrid nanoparticle on the thermal performance of cylindrical screen mesh heat pipe | Ramachandran, R., Ganesan, K., Rajkumar, M.R., Asirvatham, L.G., Wongwises, S. | International Communications in Heat and Mass Transfer | 76, pp. 294-300, August 2016. |
36 | An experimental study on two-phase flow patterns and heat transfer characteristics during boiling of R134a flowing through a multi-microchannel heat sink | Thiangtham, P., Keepaiboon, C., Kiatpachai, P., (...), Dalkilic, A.S., Wongwises, S. | International Journal of Heat and Mass Transfer | 98, pp. 390-400, July 2016. |
37 | Thermoelectric cooling of electronic devices with nanofluid in a multiport minichannel heat exchanger | Ahammed, N., Asirvatham, L.G., Wongwises, S. | Experimental Thermal and Fluid Science | 74, pp. 81-90, June 2016. |
38 | Effect of volume concentration and temperature on viscosity and surface tension of graphene-water nanofluid for heat transfer applications | Ahammed, N., Asirvatham, L.G., Wongwises, S. | Journal of Thermal Analysis and Calorimetry | 123(2), pp. 1399-1409, February 2016. |
39 | Thermal performance of miniature loop heat pipe with graphene-water nanofluid | Tharayil, T., Asirvatham, L.G., Ravindran, V., Wongwises, S. | International Journal of Heat and Mass Transfer | 93, pp. 957-968, February 2016. |
40 | The role of hybrid nanofluids in improving the thermal characteristics of screen mesh cylindrical heat pipes | Ramachandran, R.N., Ganesan, K., Asirvatham, L.G. | Thermal Science | 20(6), pp. 2027-2035, 2016. |
41 | Analysing the Performance of a Flat Plate Solar Collector with Silver/Water Nanofluid Using Artificial Neural Network | Tomy, A.M., Ahammed, N., Subathra, M.S.P., Asirvatham, L.G. | Procedia Computer Science | 93, pp. 33-40, 2016. |
42 | Measurement of thermal conductivity of graphene-water nanofluid at below and above ambient temperatures | Ahammed, N., Asirvatham, L.G., Titus, J., Bose, J.R., Wongwises, S. | International Communications in Heat and Mass Transfer | 70, pp. 66-74, January 2016. |
43 | Heat transfer performance of a glass thermosyphon using graphene-acetone nanofluid | Asirvatham, L.G., Wongwises, S., Babu, J. | Journal of Heat Transfer | 137(11),111502, November 2015. |
44 | Nanofluid heat transfer and applications | Asirvatham, L.G | Journal of Thermal Engineering | 1(2), pp. 113-115, 2015. |
45 | Heat transfer performance of Silver/Water nanofluid in a solar flat-plate collector | Roy, S., Asirvatham, L.G., Kunhappan, D., Cephas, E., Wongwises, S. | Journal of Thermal Engineering | 1(2), pp. 104-112, 2015. |
46 | Heat transfer performance of an anodized two-phase closed thermosyphon with refrigerant as working fluid | Solomon, A.B., Roshan, R., Vincent, W., Karthikeyan, V.K., Asirvatham, L.G. | International Journal of Heat and Mass Transfer | 82, pp. 521-529, 2015. |
47 | Experimental and simulation approach to plasma spray deposition of yttrium oxide | Thiyagarajan, T.K., Ananthapadmanabhan, P.V., Sreekumar, K.P., Chakravarthy, Y., Das, A.K., Gantayet, L.M., Selvan, B., Ramachandran, K. | Surface Engineering | 2012; 28 (9), pp. 646-656 |
48 | Numerical and experimental studies on DC plasma spray torch | Selvan, B., Ramachandran, K., Sreekumar, K.P., Thiyagarajan, T.K., Ananthapadmanabhan, P.V. | Vacuum | 2009; 84 (4), pp. 444-452. |
49 | Investigations on solar desalination based on vacuum evaporation for small scale applications | Wessley, G.J.J., Mathews, P.K. | Procedia Engineering | 2012 38, pp. 2413-2419. |
50 | Investigations on low temperature flash evaporation desalination for small-scale applications | Jims John Wessley, G., Koshy Mathews, P | International Journal of Engineering and Technology | 2013; 5 (5) |
51 | Modeling of incident solar radiation on a tilted surface and determination of optimum tilt of receiver for prominent cities across Tamilnadu, India | Jims John Wessley, G., Koshy Mathews, P., Davidson, D. | International Journal of Applied Engineering Research | 2014; 9 (26 Special Issue), pp. 9341-9344. |
52 | Experimental analysis of a flat plate solar collector system for small-scale desalination applications | Wessley, G.J.J., Mathews, P.K. | Advanced Materials Research | 2014; 984-985, pp. 800-806. |
53 | Thermodynamic analysis of a single and two-stage solar assisted air-cooled flash evaporation desalination system for small-scale applications | John Wessley, J., Mathews, K. | Desalination and Water Treatment | 2015; 54 (9), pp. 2364-2375. |
54 | Modelling of optimal tilt angle for solar collectors across eight indian cities | Wessley, G.J.J., Narciss Starbell, R., Sandhya, S. | International Journal of Renewable Energy Research | 2017: 7 (1), pp. 353-358. |
55 | Experimental investigation on enhancement in thermal characteristics of sintered wick heat pipe using CuO nanofluids | Kumaresan, G., Venkatachalapathy, S., Asirvatham, L.G. | International Journal of Heat and Mass Transfer | 72, pp. 507-516, 2014. |
56 | Comparative study on heat transfer characteristics of sintered and mesh wick heat pipes using CuO nanofluids | Kumaresan, G., Venkatachalapathy, S., Asirvatham, L.G., Wongwises, S. | International Communications in Heat and Mass Transfer | 57, pp. 208-215, 2014. |
57 | Numerical analysis of a screen mesh wick heat pipe with Cu/water nanofluid | Solomon, A.B., Ramachandran, K., Asirvatham, L.G., Pillai, B.C. | International Journal of Heat and Mass Transfer | 75, pp. 523-533, 2014. |
58 | Heat transfer characteristics of silver/water nanofluids in a shell and tube heat exchanger | Godson, L., Deepak, K., Enoch, C., Jefferson Raja, J.R., Raja, B. | Archives of Civil and Mechanical Engineering | 14(3), pp. 489-496, 2014. |
59 | Two-phase flow and heat transfer enhancement | Wongwises, S., Ghajar, A.J., Chau, K.-W., (...), Selim Dalkiliç, A., Asirvatham Lazarus, G. | Advances in Mechanical Engineering | 2013,256839, 2013. |
60 | Operational limitations of heat pipes with silver-water nanofluids | Asirvatham, L.G., Nimmagadda, R., Wongwises, S. | Journal of Heat Transfer | 135(11),111011, 2013. |
61 | Heat transfer performance of screen mesh wick heat pipes using silver-water nanofluid | Asirvatham, L.G., Nimmagadda, R., Wongwises, S. | International Journal of Heat and Mass Transfer | 60(1), pp. 201-209, 2013. |
62 | Convective Heat Transfer Characteristics of Silver-Water Nanofluid Under Laminar and Turbulent Flow Conditions | Godson, L., Raja, B., Mohan Lal, D., Wongwises, S. | Journal of Thermal Science and Engineering Applications | 4(3),031001, 2012. |
63 | Convective heat transfer of nanofluids with correlations | Asirvatham, L.G., Raja, B., Mohan Lal, D., Wongwises, S. | Particuology | 9(6), pp. 626-631, 2011. |
64 | Experimental investigation on the thermal conductivity and viscosity of silver-deionized water nanofluid | Godson, L., Raja, B., Lal, D.M., Wongwises, S. | Experimental Heat Transfer | 23(4), pp. 317-332, 2010. |
65 | Experimental analysis of parallel plate and crosscut pin fin heat sinks for electronic cooling applications | Sivasankaran, H., Asirvatham, G., Bose, J., Albert, B. | Thermal Science | 14(1), pp. 147-156, 2010. |
66 | Measuring the temperature-dependent thermal conductivity and viscosity of silver-water nanofluids | Godson, L., Lal, D.M. | Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT20091 | pp. 431-439, 2010. |
67 | Measurement of thermo physical properties of metallic nanofluids for high temperature applications | Godson, L., Lal, D.M., Wongwises, S. | Nanoscale and Microscale Thermophysical Engineering | 14(3), pp. 152-173, 2010. |
68 | Enhancement of heat transfer using nanofluids-An overview | Godson, L., Raja, B., Mohan Lal, D., Wongwises, S. | Renewable and Sustainable Energy Reviews | 14(2), pp. 629-641, 2010. |
69 | Experimental study on forced convective heat transfer with low volume fraction of CuO/Water nanofluid | Asirvatham, L.G., Vishal, N., Gangatharan, S.K., Lal, D.M. | Energies | 2(1), pp. 97-119, 2009. |
70 | Surface roughness prediction using artificial neural network in hard turning of AISI H13 steel with minimal cutting fluid application | Anuja Beatrice, B., Kirubakaran, E., Ranjit Jeba Thangaiah, P., Leo Dev Wins, K. | Procedia Engineering | 97, pp. 205-211, 2014. |
71 | ANFIS based Model for Surface Roughness Prediction for Hard Turning with Minimal Cutting Fluid Application | Anil Raj, M. Dev Anand, K. Leo Dev Wins and A. S. Varadarajan | Indian Journal of science and technology (Web of Science) | Vol 9(13), pp. 90562- 90567, April 2016 |
72 | Performance Evaluation of Vegetable Oil based Cutting Fluid during Hard Turning of AISI 4340 Steel with Minimal Cutting Fluid Application | Anil Raj, K. Leo Dev Wins, M. Dev Anand and A. S. Varadarajan | Indian Journal of science and technology (Web of Science) | Vol 9(13), pp. 90583- 90588, April 2016. |
73 | An experimental analysis on the performance of R404A under the influence of magnetic field and the geometry of the capillary tube | Arunkumar, S.P., Mathews, P.K., Prabha, C. | European Journal of Scientific Research | 82(1), pp. 38-45, 2012. |
74 | Friction stir processing of intermetallic particulate reinforced aluminum matrix composite | Ashok Kumar, G., Dinaharan, I., Vijay, S.J., Murugan, N. | Advanced Materials Letters | 4(3), pp. 230-234, 2013. |
75 | Effect of machining parameters and optimization of machining time in facing operation using Response Surface Methodology and Genetic Algorithm | Babu, R., Robinson Smart, D.S., Mahesh, G., Shanmugam, M. | Indian Journal of Science and Technology | 8(36),82823, 2015. |
76 | Prediction and optimization of process parameters on A22e (Bimetal Bearing) using RSM and genetic algorithm | Babu, R., Robinson Smart, D.S., Mahesh, G., Shanmugam, M. | International Journal of Applied Engineering Research | 10(17), pp. 37461-37468, 2015. |
77 | Prediction and optinization of tool wear on A22E (bimetal bearing material) using rsm and genetic algorithm | Babu, R., Smart, D.S.R., Mahesh, G., Shanmugam, M. | International Journal of Mechanical and Mechatronics Engineering | 15(5), pp. 53-65, 2015. |
78 | Thermal performance of anodized two phase closed thermosyphon (TPCT) | Brusly Solomon, A., Mathew, A., Ramachandran, K., Pillai, B.C., Karthikeyan, V.K. | Experimental Thermal and Fluid Science | 48, pp. 49-57, 2013. |
79 | Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting | David Raja Selvam, J., Robinson Smart, D.S., Dinaharan, I. | Materials and Design | 49, pp. 28-34, 2013. |
80 | Optimization of cutting parameters and fluid application parameters during turning of OHNS steel | Deepak Joel Johnson, R., Wins, K.L.D., Raj, A., Beatrice, B.A. | Procedia Engineering | 97, pp. 172-177, 2014. |
81 | Development of Al3 Ti and Al3 Zr intermetallic particulate reinforced aluminum alloy AA6061 in situ composites using friction stir processing | Dinaharan, I., Ashok Kumar, G., Vijay, S.J., Murugan, N. | Materials and Design | 63, pp. 213-222, 2014. |
82 | Effect of material location and tool rotational speed on microstructure and tensile strength of dissimilar friction stir welded aluminum alloys | Dinaharan, I., Kalaiselvan, K., Vijay, S.J., Raja, P. | Archives of Civil and Mechanical Engineering | 12(4), pp. 446-454, 2012. |
83 | Kinematic analysis of rectangular path generating adjustable four-bar linkage | Ganesan, G., Sekar, M. | Applied Mechanics and Materials | 592-594, pp. 1094-1098, 2014. |
84 | Production and characterization of rich husk ash particulate reinforced AA6061 aluminum alloy composites by compocasting | Gladston, J.A.K., Sheriff, N.M., Dinaharan, I., Raja Selvam, J.D. | Transactions of Nonferrous Metals Society of China | 25(3),63653, pp. 683-691, 2015. |
85 | Effect of FSW process parameters on dry sliding wear behavior of friction stir welded dissimilar aluminum alloy AA6061 T6 and AA5083 | Jannet, S., Koshy Mathews, P. | International Journal of Applied Engineering Research | 10(12), pp. 30277-30286, July 2015. |
86 | Comparative investigation of friction stir welding and fusion welding of 6061 T6 - 5083 O aluminum alloy based on mechanical properties and microstructure | Jannet, S., Mathews, K., Raja, R. | Bulletin of the Polish Academy of Sciences: Technical Sciences | 62(4), pp. 791-795, 2014. |
87 | Effect of welding parameters on mechanical and microstructural properties of dissimilar aluminum alloy joints produced by friction stir welding | Jannet, S., Mathews, P.K. | Applied Mechanics and Materials | 592-594, pp. 250-254, 2014. |
88 | Optimization of process parameters of friction stir welded AA 5083-O aluminum alloy using Response Surface Methodology | Jannet, S., Mathews, P.K., Raja, R. | Bulletin of the Polish Academy of Sciences: Technical Sciences | 63(4), pp. 851-855, 2015. |
89 | Simulation studies on gax based Kalina cycle for both power and cooling applications | Jawahar, C.P., Saravanan, R., Bruno, J.C., Coronas, A | Applied Thermal Engineering | 50(2), pp. 1522-1529, 2013. |
90 | Effect of nanofluids on thermal performance of closed loop pulsating heat pipe | Karthikeyan, V.K., Ramachandran, K., Pillai, B.C., Brusly Solomon, A. | Experimental Thermal and Fluid Science | 54, pp. 171-178, 2014. |
91 | Effect of number of turns on the temperature pulsations and corresponding thermal performance of pulsating heat pipe | Karthikeyan, V.K., Ramachandran, K., Pillai, B.C., Brusly Solomon, A. | Journal of Enhanced Heat Transfer | 20(5), pp. 443-452, 2014. |
92 | Understanding thermo-fluidic characteristics of a glass tube closed loop pulsating heat pipe: flow patterns and fluid oscillations | Karthikeyan, V.K., Ramachandran, K., Pillai, B.C., Brusly Solomon, A. | Heat and Mass Transfer/Waerme- und Stoffuebertragung | 51(12), pp. 1669-1680, 2015. |
93 | Numerical simulation of recirculation zone of an open V-gutter | Lindon Robert Lee, C., Haran, A.P., Venkata Krishnan, G., Antony Raja, S. | Indian Journal of Science and Technology | 8(27),73132, 2015. |
94 | Biodiesel production from waste palm oil by transesterification process | Smart, J.J., Antony Raja, S., Lindon Robert Lee, C., Robinson Smart, D.S | International Journal of Applied Engineering Research | 2015 |
95 | Effect of nanoparticles on the performance of magnetorheological fluid damper during hard turning process | Paul, P.S., Iasanth, J.A., Vasanth, X.A., Varadarajan, A.S. | Friction | 3(4), pp. 333-343, 2015. |
96 | Monitoring of tool vibration for magnetorheological fluid controlled bar during turning ff hardened Aisi4340 steel | Paul, P.S., Jazeel, M., Varadarajan, A.S. | Archive of Mechanical Engineering | 62(2), pp. 237-255, 2015. |
97 | Prediction of surface roughness in end milling operation of duplex stainless steel using response surface methodology | Philip, S.D., Chandramohan, P., Rajesh, P.K. | Journal of Engineering Science and Technology | 10(3), pp. 340-352, 2015. |
98 | Production and characterization of Al-TiB2 -ZrB2 hybrid composite using in-situ stir casting process | Rai, R.S., David Rathnaraj, J. | International Journal of Applied Engineering Research | 10(14), pp. 34594-34599, 2015. |
99 | Experimental investigation of MRR on in situ formed AA7075/TiB2 cast composites machining by wire EDM | Ramabalan, S., Michael Rajan, H.B., Dinaharan, I., Vijay, S.J. | International Journal of Machining and Machinability of Materials | 17(3-4), pp. 295-318, 2015. |
100 | Effect of anodization on the heat transfer performance of flat thermosyphon | Renjith Singh, R., Selladurai, V., Ponkarthik, P.K., Solomon, A.B., | Experimental Thermal and Fluid Science | 68, pp. 574-581, 2015. |
101 | Effect of magnetorheological fluid on tool wear during hard turning with minimal fluid application | Sam Paul, P., Varadarajan, A.S., Mohanasundaram, S. | Archives of Civil and Mechanical Engineering | 15(1), pp. 124-132, 2015. |
102 | Influence of tool rotational speed on microstructure and sliding wear behavior of Cu/B4 C surface composite synthesized by friction stir processing | Sathiskumar, R., Dinaharan, I., Murugan, N., Vijay, S.J. | Transactions of Nonferrous Metals Society of China | 25(1), pp. 95-102, 2015. |
103 | Comparative study of diesel and biodiesel on CI engine with emphasis to emissions - A review | Shahir, V.K., Jawahar, C.P., Suresh, P.R. | Renewable and Sustainable Energy Reviews | 45, pp. 686-697, 2015. |
104 | Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing | Thangarasu, A., Murugan, N., Dinaharan, I., Vijay, S.J. | Archives of Civil and Mechanical Engineering | 15(2), pp. 324-334, 2015. |
105 | Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites | Michael Rajan, H.B., Ramabalan, S., Dinaharan, I., Vijay, S.J. | Archives of Civil and Mechanical Engineering | 14(1), pp. 72-79, 2014. |
106 | Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method | Philip Selvaraj, D., Chandramohan, P., Mohanraj, M. | Measurement: Journal of the International Measurement Confederation | 49(1), pp. 205-215, 2014. |
107 | Artificial neural network assisted sensor fusion model for predicting surface roughness during hard turning of H13 steel with minimal cutting fluid application | J. Gerald Anto Arulraj, K. Leo Dev Wins, Anil Raj | Procedia Materials Science, (Web of Science) | Vol. 5, 2014, pp. 2338 – 2346. |
108 | Exergy analysis of a domestic refrigerator using eco- friendly R441A refrigerant mixture as an alternative to R134A | Prabha, C., Koshy Mathews, P. | International Journal of Applied Engineering Research | 9(22), pp. 17317-17325, 2014. |
109 | Biomethanation using water hyacinth with cow dung and performance evaluation of high speed diesel engine using gas and diesel | Prabha, C., Lakshmi Prabha, M., Madhan Sam, D. | International Journal of ChemTech Research | 6(2), pp. 1524-1530, 2014. |
110 | Electrical discharge machining of Al-TiB2 with a low-frequency vibrating tool | Prabu, M., Ramadoss, G., Narendersingh, P., Christy, T.V., Vedhagiri Eswaran, V. | Science and Engineering of Composite Materials | 21(3), pp. 445-452, 2014. |
111 | Experimental investigation of drilling of GFRP composites by twist drill bit made up of different tool materials | Raja, R., Chandramohan, G., Krishnaraj, V. | International Journal of Applied Engineering Research | 9(24), pp. 28343-28348, 2014. |
112 | Prediction of Delamination by Fuzzy Logic in Drilling of Glass Fiber Reinforced Plastics (Gfrp) by Special Drill Bits and Experimental Validation | Raja, R., Chandramohan, G., Krishnaraj, V. | International Journal of Applied Engineering Research | 9(22), pp. 17043-17049, 2014. |
113 | Experimental investigation of effect of rotary abrasive jet nozzle on coating removal rate and surface finish | Robinson Smart, D.S., Rufus, D.P., George, L. | Advanced Materials Research | 1043, pp. 165-171, 2014. |
114 | Infrared thermography of a pulsating heat pipe: Flow regimes and multiple steady states | Karthikeyan, V.K., Khandekar, S, Pillai, B.C., Sharma, P.K. | Applied Thermal Engineering | Volume 62, Issue 2, 2014, Pages 470-480. |
115 | Infrared thermography of a pulsating heat pipe: Flow regimes and multiple steady states | Karthikeyan, V.K., Khandekar, S, Pillai, B.C., Sharma, P.K. | Applied Thermal Engineering | Volume 61, Issue 2, 3 November 2013, Pages 470-480 |
116 | Photocatalytic inactivation of Gram-positive and Gram-negative bacteria by reactive plasma processed nanocrystalline TiO 2 powder | Vijay, M., Ramachandran, K., Ananthapadmanabhan, P.V., Nalini, B., Pillai, B.C., Bondioli, F., Manivannan, A., Narendhirakannan, R.T. | Current Applied Physics | 2013; 13 (3), pp. 510-516. |
117 | Optimization of process parameters in flash pyrolysis of waste tyres to liquid and gaseous fuel in a fluidized bed reactor | Edwin Raj, R., Robert Kennedy, Z., Pillai, B.C. | Energy Conversion and Management | 2013; 67, pp. 145-151. |
118 | An Extraction and Performance Analysis of Rubber Seed-Methyl Ester on an IC Engine at Various Compression Ratios | Jose, D.F.M., Prasad, B.D., Raj, R.E., Kennedy, Z.R. | International Journal of Green Energy | 2014; 11 (8), pp. 808-821 |
119 | The effect of secondary air on the performance of double walled gasifier | Kennedy, Z.R., Lukose, T.P. | Journal of the Institution of Engineers (India): Mechanical Engineering Division | 2010; 90 (JANUARY), pp. 36-43. |
120 | Carbothermal reduction of sillimanite in a transferred arc thermal plasma reactor | Vijay, M., Ananthapadmanabhan, P.V., Ramachandran, K., Hiremath, G., Mathai, C.B., Nalini, B., Pillai, B.C. | International Journal of Refractory Metals and Hard Materials | 2013; 36, pp. 174-178 |
121 | Numerical modelling of Ar-N 2 plasma jet impinging on a flat substrate | Selvan, B., Ramachandran, K., Pillai, B.C., Subhakar, D. | Journal of Thermal Spray Technology | 2011; 20 (3), pp. 534-548. |
122 | Modelling of the plasma-substrate interaction and prediction of substrate temperature during the plasma heating | Selvan, B., Ramachandran, K., Pillai, B.C., Subhakar, D. | European Physical Journal D | 2011; 61 (3), pp. 663-675. |
123 | Flash pyrolysis of jatropha oil cake in electrically heated fluidized bed reactor | Raja, S.A., Kennedy, Z.R., Pillai, B.C., Lee, C.L.R. | Energy | 2010; 35 (7), pp. 2819-2823 |
124 | Effect of impact mass on tool vibration and cutting performance during turning of hardened AISI4340 steel | Sam Paul, P., Varadarajan, A.S. | Romanian Journal of Acoustics and Vibration | 11(2),A015, pp. 154-163, 2014. |
125 | Effect of magnetic field on damping ability of magnetorheological damper during hard turning | Sam Paul, P., Varadarajan, A.S., Ajay Vasanth, X., Lawrance, G. | Archives of Civil and Mechanical Engineering | 14(3), pp. 433-443, 2014. |
126 | Fabrication and characterization of Cu/B4 C surface dispersion strengthened composite using friction stir processing | Sathiskumar, R., Murugan, N., Dinaharan, I., Vijay, S.J. | Archives of Metallurgy and Materials | 59(1), pp. 83-87, 2014. |
127 | Prediction of mechanical and wear properties of copper surface composites fabricated using friction stir processing | Sathiskumar, R., Murugan, N., Dinaharan, I., Vijay, S.J. | Materials and Design | 55, pp. 224-234, 2014. |
128 | Effect of tool rotational speed on microstructure and microhardness of AA6082/TiC surface composites using friction stir processing | Thangarasu, A., Murugan, N., Dinaharan, I., Vijay, S.J. | Applied Mechanics and Materials | 592-594, pp. 234-239, 2014. |
129 | Design of a vibration isolation system using eddy current damper | Paul, P., Ingale, C., Bhattacharya, B. | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | March 2014; 228 (4), pp. 664-675. |
130 | Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites | Michael Rajan, H.B., Ramabalan, S., Dinaharan, I., Vijay, S.J. | Materials and Design | 44, pp. 438-445, 2013. |
131 | Design and development of Fly ash reinforced aluminium matrix composite using friction stir process (FSP) | Nelson, R., Dinaharan, I., Vijay, S.J. | International Conference on Energy Efficient Technologies for Sustainability, ICEETS 20136533503 | pp. 883-887, 2013. |
132 | ANN assisted sensor fusion model to predict tool wear during hard turning with minimal fluid application | Paul, P.S., Varadarajan, A.S. | International Journal of Machining and Machinability of Materials | 13(4), pp. 398-413, 2013. |
133 | Performance evaluation of hard turning of AISI 4340 steel with minimal fluid application in the presence of semi-solid lubricants | Paul, P.S., Varadarajan, A.S. | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 227(7), pp. 738-748, 2013. |
134 | Experimental investigations on surface roughness, cutting force and tool wear of duplex stainless steel in end milling using Taguchi method | Philip Selvaraj, D., Chandramohan, P., Mohanraj, M., Rajesh, P.K. | International Review of Mechanical Engineering | 7(6), pp. 1133-1141, 2013. |
135 | Study on the influence of electromagnetic properties of smart fluid on tool vibration | Sam Paul, P., Ajay Vasanth, X., Varadarajan, A.S. | International Conference on Energy Efficient Technologies for Sustainability, ICEETS 20136533391 | pp. 252-256, 2013. |
136 | Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing | Sathiskumar, R., Murugan, N., Dinaharan, I., Vijay, S.J. | Materials Characterization | 84, pp. 16-27, 2013. |
137 | Effect of traverse speed on microstructure and microhardness of Cu/B 4 C surface composite produced by friction stir processing | Sathiskumar, R., Murugan, N., Dinaharan, I., Vijay, S.J. | Transactions of the Indian Institute of Metals | 66(4), pp. 333-337, 2013. |
138 | Role of friction stir processing parameters on microstructure and microhardness of boron carbide particulate reinforced copper surface composites | Sathiskumar, R., Murugan, N., Dinaharan, I., Vijay, S.J. | Sadhana - Academy Proceedings in Engineering Sciences | 38(6), pp. 1433-1450, 2013. |
139 | Synthesis and characterization of Al6061-Fly Ashp-SiCp composites by stir casting and compocasting methods | Selvam, D.R.J., Dinaharan, D.R.I. | Energy Procedia | 34, pp. 637-646, 2013. |
140 | Experimental investigation of effect of gear milling parameters of Al- B4C composite gears on surface roughness | Smart, D.S.R., Varghese, P., George, L.J. | Advanced Materials Research | 690 693, pp. 2523-2528, 2013. |
141 | Mathematical modeling and prediction of the thrust force and torque in drilling of sisal/glass-vinyl ester hybrid composite using the RSM, MLPNN, RBFN and ENN methods | Velumani, S., Navaneethakrishnan, P., Jayabal, S., Robinson Smart, D.S. | Indian Journal of Engineering and Materials Sciences | 20(4), pp. 289-298, 2013. |
142 | Optimization of mechanical properties of non-woven short sisal fibre-reinforced vinyl ester composite using factorial design and GAmethod | Velumani, S., Navaneethakrishnan, P., Jayabal, S., Robinson Smart, D.S. | Bulletin of Materials Science | 36(4), pp. 575-583, 2013. |
143 | Electrical discharge machining (Edm): Selection of dielectric in achining assab 718hh | Abbas, N.M., Solomon, D.G. | Advanced Materials Research | 2013; 622, pp. 520-524. |
144 | A multi-sensor fusion model based on artificial neural network to predict tool wear during hard turning | Paul, P.S., Varadarajan, A.S. | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 226(5), pp. 853-860, 2012. |
145 | Effect of magneto rheological damper on tool vibration during hard turning | Paul, P.S., Varadarajan, A.S. | Frontiers of Mechanical Engineering | 7(4), pp. 410-416, 2012. |
146 | Experimental evaluation of twisted drill bit point geometry and fiber orientation on thrust force and torque during drilling of polymer matrix composites | Raja, R., Chandramohan, G | European Journal of Scientific Research | 74(3), pp. 426-432, 2012. |
147 | Delamination analysis in drilling of glass fiber reinforced plastics (GFRP) by special drill bits | Raja, R., Chandramohan, G., Jannet, S., Alexander, D. | European Journal of Scientific Research | 83(1), pp. 121-128, 2012. |
148 | Microstructure and sliding wear behavior of AA6360/(TiC+B 4 C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate | Rejil, C.M., Dinaharan, I., Vijay, S.J., Murugan, N. | Materials Science and Engineering | A552, pp. 336-344, 2012. |
149 | Application of standalone system and hybrid system for fault diagnosis of centrifugal pump using time domain signals and statistical features | Sakthivel, N.R., Nair, B.B., Sugumaran, V., Roy, R.S. | International Journal of Data Mining, Modelling and Management | 4(1), pp. 74-104, 2012. |
150 | Analysis of turning tool holder with MR fluid damper | Sam Paul, P., Varadarajan, A.S., Lawrance, G., Sunil, K.S. | Procedia Engineering | 38, pp. 2572-2578, 2012. |
151 | Thermal performance of heat pipe with suspended nano-particles | Shukla, K.N., Solomon, A.B., Pillai, B.C., Singh, B.J.R., Kumar, S.S. | Heat and Mass Transfer/Waerme- und Stoffuebertragung | 48(11), pp. 1913-1920, 2012. |
152 | Thermal performance of a heat pipe with nanoparticles coated wick | Solomon, A.B., Ramachandran, K., Pillai, B.C. | Applied Thermal Engineering | 36(1), pp. 106-112, 2012. |
153 | Microstructure and microhardness of AA1050/TiC surface composite fabricated using friction stir processing | Thangarasu, A., Murugan, N., Dinaharan, I., Vijay, S.J. | Sadhana - Academy Proceedings in Engineering Sciences | 37(5), pp. 579-586, 2012. |
154 | Optimization of tensile strength of friction stir welded Al-(10 to14 wt.%) TiB2 metal matrix composites | Vijay, S.J., Murugan, N., Parameswaran, S. | TMS Annual Meeting | 1, pp. 783-790, 2012. |
155 | Characterization of Al 6061 alloy using pulsed gas tungsten arc welding | Lindon Robert Lee, C., Neilash Kumar, P., Antony Raja, S., Ravichandran, K., Gopala Krishnan, G. | International Review of Mechanical Engineering | 5(3), pp. 387-389, 2011. |
156 | Decision support system using artificial immune recognition system for fault classification of centrifugal pump | Sakthivel, N.R., Nair, B.B., Sugumaran, V., Rai, R.S. | International Journal of Data Analysis Techniques and Strategies | 3(1), pp. 66-84, 2011. |
157 | Pack boriding - A low cost method toimprove the wear resistance of steels | Darius Gnanaraj, S., Ramakrishnan, S.S., Pallan, A.P., Gopalakrishnan, P. | Journal of Mechanical Engineering | 2011; 8 (2), pp.93-100. |
158 | Optimization of surface roughness of AISI 304 austenitic stainless steel in dry turning operation using Taguchi design method | Philip Selvaraj, D., Chandramohan, P. | Journal of Engineering Science and Technology | 5(3), pp. 293-301, 2010. |
159 | Thermal performance of cylindrical heat pipe using nanofluids | Shukla, K.N., Solomon, A.B., Pillai, B.C., Ibrahim, M. | Journal of Thermophysics and Heat Transfer | October-December 2010; 24(4), pp. 796-802. |
160 | Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al-10wt.% TiB2 metal matrix composite | Vijay, S.J., Murugan, N | Materials and Design | 31(7), pp. 3585-3589, 2010. |
161 | Experimental studies of rotating heat pipes | Shukla, K.N., Brusly Solomon, A., Pillai, B.C. | Heat Transfer - Asian Research | 2019; 38(8), pp. 475-484. |
162 | Flash pyrolysis of jatropha oil cake in electrically heated fluidized bed reactor | Raja, S.A., Kennedy, Z.R., Pillai, B.C., Lee, C.L.R. | Energy | 2010; 35 (7), pp. 2819-2823. |
163 | Flash pyrolysis of jatropha oil cake in fluidized bed reactor | Raja, S.A., Kennedy, Z.R., Pillai, B.C., Robert Lee, C.L. | International Review of Mechanical Engineering | 2009; 3 (6), pp. 753-757. |
164 | Exhaust emissions and performance of diesel engine fuelled with tyre based oil blends | Kennedy, Z.R., Rathinaraj, D. | Journal of the Institution of Engineers (India): Mechanical Engineering Division | April 2007; 88, pp. 13-18 |
165 | Steady state performance of a rotating heat pipe | Solomon, A.B., Arun, N.J., Shukla, K.N., Pillai, B.C. | 46th AIAA Aerospace Sciences Meeting and Exhibit | 2008-1293, 2008. |
166 | Studies on variable swirl intake system for di diesel engine using computational fluid dynamics | Jebamani, D.R., Kumar, T.M.N. | Thermal Science | 2008; 12 (1), pp. 25-32. |
167 | Simulation and experimental investigation of variable swirl intake port in di diesel engine using CFD | Rathnaraj, J.D., Bose, B.J.R., Kumar, M.N. | Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM20061 SYMPOSIA | pp. 203-210, 2006. |
168 | Simulation and experimental investigation of variable swril intake port in DI diesel engine using CFD | Rathnaraj, J.D., Raja Bose, B.J., Kumar, M.N. | 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting FEDSM | 2006 |
International Conferences
- Lawrance, "Effectiveness of particle damper on cutting performance during hard turning process", in the International Conference on Materials Research in Science and Engineering (KMRSE"21), organized by Kumaraguru College of Technology, Coimbatore during 23 to 25 July 2021.
- Lawrance, "Investigation on tribological properties of chromium filled particle damper during hard boring process", in the International Conference on Emerging Trends in Design, manufacturing, Materials and Thermal Sciences, organized by B.S. Abdur Rahman Crescent Institute of Science & Technology, during 24 & 25 September 2020.
- Lawrance, "Study on the influence of auxiliary mass on displacement using computational static analysis", in the International Conference on Emerging Trends in Design, manufacturing, Materials and Thermal Sciences, organized by B.S. Abdur Rahman Crescent Institute of Science & Technology, during 24 & 25 September 2020.
- Gnanasundari, Lazarus Godson Asirvatham, Joseph John Marshal.S, Mona Sahu, M. Jesse Aaron, "Heat Transfer Studies using Glycerin based nanocoolant for car Radiator Cooling Applications" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Mona Sahu, Gadudasu Babu Rao, Wilson M Kumar, S. J Vijay, Achsah Phebe Chrysolin, Ajith Purushothaman Madan, Samuel Jebish, and Joseph J John, "Design and Development of Mechatronic System for an Automated Ergonomic Keyboard Tray" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Lawrance, Sam Paul.P, Jeffrey Shaji, Edwin Sudhagar.P, Samuel RatnaKumar.P.S, "Investigation of tribological property on multi-layered coating during boring process" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Rajakumar. S. Rai, Ajay Vasanth. X, I. Kantharaj, R. Srinivasan, "Design and analysis of a structure to support two star sensors" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Pasupuleti Suman, Praveen Kumar Bannaravuri, Gadudasu Baburao, Sumanth Ratna Kandavalli, Shahnawaz Alam, Meenuga ShanthiRaju, Kumar Swamy Pulisheru, Anil Kumar Birru, "Effect on the mechanical and wear properties of Cu-based composites with the addition of reinforcement: A comprehensive review" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- S. Ramani, K. Leo Dev Wins, D.S. Ebenezer Jacob Dhas, B. Anuja Beatrice, "Influence Of B4c And Tib2 Nanoparticles In Tungsten Inert Gas Weldment: The Development Of Nanocomposite Filler Re-Melt Behaviour For Joint Strength Enhancement" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Sumanth Ratna Kandavalli, Gadudasu Babu Rao, Praveen Kumar Bannaravuri, Manu Mathai Kanakamani Rajam, Sunanda Ratna Kandavalli, S. Rajesh Ruban, "Surface Strengthening Of Aluminium Alloys/Composites By Laser Applications: A Comprehensive Review", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- D. Emmanuel Sam Franklin, S.J. Vijay, S. Mohanasundaram, R. Nelson, Hiran Gabriel D J, "Investigations On Gtaw And Fsw Of Al6061-Zrb2-Fly Ash Hybrid Metal Matrix Composites", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Abinson Paul N,Rajakumar S Rai, S J Vijay, "A Comparative Study on Mathematical Approaches to Determine the Time - Lag & Synchrony Between Two Timeseries Data In Different Engineering Applications", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Maibam Bindya Devi, Anil Kumar Birru, Praveen Kumar Bannaravuri, "The Recent Trends of EDM Applications and Its Relevance in the Machining of Aluminium Mmcs: A Comprehensive Review", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Mrunal Swaroop Peravali, Gadudasu Babu Rao, Praveen Kumar Bannaravuri, Mona Sahu,Dasari Raju Lakshmi Deepak, Sumanth Ratna Kandavalli, Kumara swamy Pulisheru,Srinivasa Rao Gorrepati, "Mechatronic System for an Automated Dynamics Stair Case for Walking Difficulty People to Travel in Public Road Transportation Vehicles" in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- John Jeyaraj Steffan, Immanuel John raja Jebadurai, Lazarus Godson Asirvatham, Stephen Manova and Jeffry Pon Larkins, "Prediction Of Brake Pad Wear Using Various Machine Learning Algorithms", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- Meenuga Shanthi Raju, Anil Kumar Birru, Praveen Kumar Bannaravuri, "Effect of Cavitation And Spallation on Ribbon Morphology of Fe73.5si13.5b9cu1nb3 Alloy in Planar Flow Melt Spinning Process", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior on 15th and 16th October 2020.
- R S Anand, C.P.Jawahar, A.Brusly Solomon, Shibin David, "Prediction of Al2o3/R134A Nanorefrigerant Based Modified Thermosyphon Performance Using Random Forest Algorithm", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior during 15th and 16th October 2020.
- Pradeep George, K. Leo Dev Wins, D.S. Ebenezer Jacob Dhas, Pramod George, B. Anuja Beatrice, "Effect of Machining Parameters on Cutting Force During Dry Milling of 2205 Dss and 2507 SDSS Materials", in the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020) held at Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior during 15th and 16th October 2020.
- Philip Selvaraj, "Cutting Parameter Optimization of CNC Dry Milling Process of AISI 410 and 420 Grade MSS", in the 2020 Second International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2020) held at the Department of Mechanical Engineering, Velalar College of Engineering and Technology, Erode on 20th and 21st November 2020.
- Philip Selvaraj, "Machinability, Surface Treatment and Allied Studies of Martensitic Stainless Steels: A Review", in the International Virtual Conference on Applied Science, Technology Management and Language Studies (ASTMLS-2020) held at SONA College of Technology, during 11th and 12th December 2020.
- Lawrance, "Influence of Stainless Steel Impact Damper on Tribological Properties during Boring Process", in the 2nd International Conference on Manufacturing, Material Science & Engineering, Hyderabad during 18th & 19th December 2020.
- Robinson Smart D.S, “Mechanical and Wear Characterization of LM13/SiC/Gr Dispersed Hybrid Composite Formed through Stir Casting, in the 3rd International Conference on Materials, Manufacturing and Modelling –ICMMM2021, Organized and conducted by VIT, India, during 19th-21st March 2021.
- Malkiya Rasalin Prince R, "Influence Of B4c Addition On Wear And Mechanical Properties Of Ti6Al4V-2B4C Coating On 316l Steel For Artificial Hip Prosthesis", in the International Conference on Advanced Materials & Modern manufacturing (ICAMMM 2021), held at Adhi College of Engineering and Technology during 26-28th March 2021.
- Brusly Solomon, "Magnetic field-dependent thermal conductivity of ethyleneglycol/H2O-based MgFe2O4 ferrofluid", in the Third International Conference on Materials Science and Manufacturing Technology 2021 (ICMSMT 2021) held at Hotel Aloft, Coimbatore, Tamil Nadu, India during 15-16, April 2021.
- Philip Selvaraj, "Impact of cutting parameters on cutting force of AISI 410 and AISI 420 MSS during CNC dry milling", in the Third International Conference on Materials Science and Manufacturing Technology 2021 (ICMSMT 2021) held at Hotel Aloft, Coimbatore, Tamil Nadu, India during 15-16, April 2021.
- Lawrance, "Study of Particle Damping on Tribological Properties During Hard boring Process", in the International Conference on Technological Innovations in Mechanical Engineering (TIME - 2021), held at Sharda University, Uttar Pradesh, during 16th & 17th April 2021.
- Philip Selvaraj, "A Review on Polymer Matrix Composite materials and their Applications", at AICTE Sponsored International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT) 2021 organized by the Department of Mechanical Engineering, Federal Institute of Science and Technology on 22- 23 April 2021.
- Lawrance. G, Sam Paul. P, Moses Jan N, Stan Pravin S, "Investigation of particle Damper on Tool Vibration During Boring Process", at International Conference on Futuristic Research in Engineering Smart Materials (FRESM'21) held at CMRIT, Bengaluru on 23-24 April 2021.
- Suresh M., C.P. Jawahar, “Experimental investigations on the production performance and emission characteristics of a variable compression ratio direct injection ci engine using kokum oil biodiesel”, in the 11th International Exergy, Energy and Environment Symposium, held at SRM Institute of Science and Technology, Chennai during 14-18th July 2019.
- Mona Sahu*, Kondru Gnanasundari, Abhishek David, "Recent Ergonomic Interventions and Evaluations on Laptop, Smart Phones and Desktop Computer Users", 2nd International Conference on Advances in Engineering Management & Sciences (ICAEMS 19), held at Santhiram Engineering College, Nandyal on 26-27, July 2019.
- Mona Sahu*, Kondru Gnanasundari, Emerald Ninolin S, "Design and Fabrication of an Automated Laptop Stand", 2nd International Conference on Advances in Engineering Management & Sciences (ICAEMS 19), held at Santhiram Engineering College, Nandyal on 26-27, July 2019.
- D.S.Robinson Smart, J. Pradeep Kumar, R. Sanjit Cyrusc, “Development and Investigations of Al5083/CNT/Ni/MoS2 Metal Matrix Composite for Offshore Applications”, in the 1st International Conference on Manufacturing, Material Science & Engineering – ICMMSE-2019”, Organized by CMR Institute of Technology, Hyderabad, AP, India, during 16-17 August 2019.
- Anand RS, Jawahar C P, Brusly Solomon A, Joel Suresh Kumar, Johan C Jacoba, Moncy M Tharakan, “Heat transfer properties of HFE and R134 based Al2O3 Nano refrigerant in thermosyphon for enhancing the heat transfer”, in the 2019 First International Conference on Recent Advances in Materials and manufacturing (ICRAMM2019), held at KLE Dr. M.S. Sheshgiri College of Engineering and Technology, Belagavi, Karnataka, during 12-14, September 2019.
- K Ajith, I V Muthuvijayan Enoch, A Brusly Solomon, Archana Sumohan Pillai, “Characterization of magnesium ferrite nano fluids for heat transfer applications”, in the 2019 First International Conference on Recent Advances in Materials and manufacturing (ICRAMM2019), held at KLE Dr. M.S. Sheshgiri College of Engineering and Technology, Belagavi, Karnataka, during 12-14, September 2019.
- P S Kishore, V Sieesha, V Sree Harsha, V Dharma Rao and A Brusly Solomon, “Preparation, characterization and thermo-physical properties of Cu-graphene nano platelets hybrid nanofluids”, in the 2019 First International Conference on Recent Advances in Materials and manufacturing (ICRAMM2019), held at KLE Dr. M.S. Sheshgiri College of Engineering and Technology, Belagavi, Karnataka, during 12-14, September 2019.
- Rittin Abraham Kurien (RP16ME012), D.Philip Selvaraj, M. Sekar, “Experimental Investigation of Epoxy Based Multi Walled CNT Reinforced Composites”, in the International Conference on Multifunctional and Hybrid Materials for Chemical Process, Energy, Environment and medical applications, held at NIT Tiruchirappalli, during 9-11, September 2019.
- Anuja Beatrice B, Leo Dev Wins K, Ebenezer Jacob Dhas D S, Arul Kirubakaran D, “Prediction of Surface Roughness Using Sensor Fusion Regression Model”, International Conference on New Achievements in Multidisciplinary Research, Sri Krishna Arts and Science College (SKASC) and Institute For Engineering Research and Publication (IFERP) ICNAMR-19, Coimbatore, during 26-27, September 2019.
- G. Babu Rao, "Fabrication and Tensile Testing of DHAK Fiber Reinforced Polyester Composites", 4th International Conference on Emerging Trends in Mechanical & Industrial Engineering (ICETMIE-2019), held at The NorthCap University, Gurugram, during 10-11, October 2019.
- Rittin Abraham Kurien (RP16ME012), D.Philip Selvaraj, M.Sekar, “Characterization and Evaluation of Epoxy Resin Composites Reinforced with Different Multi-Walled Carbon Nanotube Concentration: Tribological and Mechanical Performance”, 2nd International Conference on Nanoscience and Nanotechnology (ICNAN-2019), held at Vellore Institute of Technology, Vellore, during 29th November to 1st December 2019.
- Ganesan G, CLINTON WILSON BARNABAS V (PRK18ME4002), Rajakumar S. Rai, "Dimension Synthesis of Adjustable Mechanism to generate Square Pathe Verified by Reconstructed Adjustable Parameter Curve Method", International Conference on Physics and Chemistry of Materials in Novel Engineering Applications, PCMNEA 2020, held at Kumaraguru College of Technology, Coimbatore during 6-7, February 2020.
- Lawrance G, Sam Paul P, Varadarajan A S, Titus Thankachan, Jeffrey Shaj, "Effect of Temperature on Nano Metal Oxide Coating in Boring hardened Steel", at the International Conference on Physics and Chemistry of Material in Novel Engineering Applications, PCMNEA 2020, held at Kumaraguru College of Technology, Coimbatore on 6th and 7th February 2020.
- Devesh Gupta, R Raja, P Jegathambal, Sabitha Jannet, Sumant Ratna, "Fabrication And Study of Al6061-T6 Reinforced with Tio2 Nanoparticles by the Process of Friction Stir Processing", at the International Conference on Physics and Chemistry of Material in Novel Engineering Applications, PCMNEA 2020, held at Kumaraguru College of Technology, Coimbatore on 6th and 7th February 2020.
- Arulkirubakaran D, "Study of Cutting Force and Prediction of Surface Quality Analysis using Neural Network Model, Support Vector Regression Model by Various Textured Tool Condition for Ti-6Al-4V Alloy" at the International Conference on Technological Advancements in Materials, Design, manufacturing and Energy Sectors (ICTAMDMES'20), held at St. Joseph's College of Engineering, Chennai from 20th February 2020 to 21st February 2020.
- Malkiya Rasalin Prince R, "Effect of Load and Sliding Distance on Tribological Properties of AISI 1040 Steel by Magnetron Sputtered Ti-6Al-4V Coating" at the International Conference on Technological Advancements in Materials, Design, manufacturing and Energy Sectors (ICTAMDMES'20), held at St. Joseph's College of Engineering, Chennai from 20th February 2020 to 21st February 2020.
- Brusly Solomon A, Emerald Ninolin, Jocin Varghese, "Performance study of flat heat pipe with metallic copper hierarchical structure as a wick”, in the Second International Conference on Materials Science and Manufacturing Technology 2020 (ICMSMT 2020) held at Hotel Aloft, Coimbatore, Tamil Nadu, India during 09 - 10, April 2020.
- Arulkirubakaran D, "Development of Regression Models for Spark Erosion Machining of Nickel Alloys" at the International Conference on Advanced Materials & Modern Manufacturing (ICAMMM'20, held at Adhi College Of Engineering and Technology, Chennai from 29th May 2020 to 30th May 2020.
- Arulkirubakaran D, "Experimental Investigation on Turning of Alumina (Al2O3) Ceramics using Nd:YAG Laser Technique" at the International Conference on Advanced Materials & Modern Manufacturing (ICAMMM'20, held at Adhi College Of Engineering and Technology, Chennai from 29th May 2020 to 30th May 2020.
- D.S. Robinson Smart “Aluminium Hybrid Metal Matrix Composite Reinforced with TaC, Ti, Si3N4 Nanoparticles - a Review” at RSRI Conference on Materials and Computational intelligence (RSRI CMCI 2018), held at Shree Rayeshwar Institute of Engineering & Information Technology, Shiroda, Goa during 28-29 September 2018.
- K. John Joshua, S.J. Vijay, P. Ram Kumar, S. Mohanasundaram, “Effect of ZnO particles on Microstructure Microhardness & Wear Behaviour of AA7068 MMCS”, in the Second International Conference on Sutainable Energy Resources, Materials and Technologies (ISERMT-2019), held at SSN College of Engineering, Kalavakkam, from 14th March 2019 to 15th March 2019.
- Santhiyagu Joseph Vijay, S. Mohanasundaram, P. Ramkumar, Hong Gun Kim, Alexandre Tugirumubano, Sun Ho Go, “Experimental Investigations on Activated-TIG Welding of Incomel 625 and AISI 304 Alloys”, in the International Conference on Advances in Material and Manufacturing Engineering - 2019, held at Kalinga Institute of Industrial Technology, Bhubaneswar, from 15th March 2019 to 17th March 2019.
- Kondru Gnana Sundari, Lazarus Godson Asirvatham, Joseph John Marshal.S, T Michael N Kumar, Mona Sahu, “Experimental Investigations of Glycerin/Al2O3 nanofluid in the Hydrodynamically Developing Region for Automotive Cooling Applications”, in the International Conference on Advances in Material and Manufacturing Engineering - 2019, held at Kalinga Institute of Industrial Technology, Bhubaneswar, from 15th March 2019 to 17th March 2019.
- Masepogu Wilson Kumar, Mona Sahu, Santhiyagu Joseph Vijay, “Experimental Investigations on the Effect of Wheel size on an Industrial Trolley”, in the International Conference on Advances in Material and Manufacturing Engineering - 2019, held at Kalinga Institute of Industrial Technology, Bhubaneswar, from 15th March 2019 to 17th March 2019.
- Arunkumar, C. Prabha, Naveen Kumar, “Performance and Emission Evaluation of a Biodiesel (Rice Bran Oil Methyl Ester) Fuelled Transportation Diesel Engine With and Without EGR”, in the International Conference on Recent Advancements in Engineering and Technology, held at Siddhartha Institute of Technology and Sciences, Hyderabad, from 15th March 2019 to 16th March 2019.
- Arunkumar, C. Prabha, Naveen Kumar, “Development of Mathematical Model to Predict the Co Efficient of Performance in a Vapour Compression Refrigeration System Working with R404a”, in the International Conference on Recent Advancements in Engineering and Technology, held at Siddhartha Institute of Technology and Sciences, Hyderabad, from 15th March 2019 to 16th March 2019.
- Sabitha Jannet, E. Pradeep Kumar Reddy, R. Raja, B. Morish Monohar, “Effect of SIC Nanoparticles on the Dispersion of Carbon MWNT in AA5083 by stir casting Technique”, in the 2nd International Conference on Materials, Manufacturing and Modelling ICMMM-2019, held at Vellore Institute of Technology, Vellore from 29 March 2019 to 31 March 2019.
- A. Brusly Solomon, Catherine Joy, A. Albert Rajan, S. Emerald Ninolin, Jocin Varghese, “Performance study of flat heat pipe with metallic copper hierarchical structure as wick”, International Conference on Energy and Environment (ICEE2019), held at Hindustan College of Engineering and Technology, Coimbatore during 11-12 April 2019.
- R Catherine Joy, A Albert Rajan, A Brusly Solomon, K Ramachandran and B C Pillai, “Experimental investigation on the critical heat flux of Cuwater, Al-water nanofluids for precise cooling of electronic systems”, in the First International Conference on Materials Science and Manufacturing Technology, held at Hotel Aloft, Coimbatore during 12-13, April 2019.
- K. John Joshua, S.J. Vijay, P. Ramkumar, D. Philip Selvaraj, “Influence of Graphite particles on Microhardness and Microstructural Behaviour of AA7068 Metal Matrix Composites processed by Powder Metallurgy”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- K. John Joshua, S.J. Vijay, P. Ramkumar, D. Philip Selvaraj, “Microhardness and Microstructural Behaviour of AA7068/SiC Metal Matrix Composites synthesized by Powder Metallurgy”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Lawrance. G, Sam Paul. P, Varadarajan.A.S, “Computational Analysis of Boring Tool Holder with Damping Force”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- S. Mohanasundaram, S. J. Vijay, Rajakumar S. Rai, I. Kantharaj, Melwyn A. S, Theophilus S, “Effect of compaction loads in machining of short carbon fiber reinforced aluminium composite”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- A.L. Sriram Sudhan, A. Brusly Solomon, “Effect of temperature on the surface characteristics of anodized aluminium tubes”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Ajay Vasanth. X , Rajakumar. S. Rai , Balasubramanian. K , Tejas T. M (UR15ME209) and Stephen Donald. A (UR15ME258), “Design and analysis of a structure to support two star sensors”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- D. Emmanuel Sam Franklin, “Investigations on GTAW and FSW of Al6061-ZrB2-Fly Ash Hybrid Metal Matrix Composites”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- I. Kantharaj, Hiran Gabriel D J, D. Emmanuel Sam Franklin, S. Mohanasundaram and D. Julius Benedict Prakash, ”Experimental Investigation on Heat Pipe Assisted Cooling During Milling Process on AISI 1040”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Prabhu Rubesh George, I. Kantharaj, Hiran Gabriel D J and D. Julius Benedict Prakash, “Tensile and Wear Behaviour of Aluminium Alloy LM6 Reinforced with Magnesium and Copper”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- P. Jayaseelan and T. V Christy, “Effect of Friction Stir Welding Tool by Varying Tool Pin Profile and Tool Material on Al-SiC Composites”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- D. Emmanuel Sam Franklin,”A Study on Plasma keyhole welding of Stainless Steel”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Ganesan Govindasamy, Rajakumar S. Rai and Gadudasu BabuRao, ”Optimal Dimensional Synthesis of Rhombus Path Generating Adjustable Four-bar Mechanism”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- S. Ramani, K. Leo Dev Wins, R. Robinson Gananadurai and B. Anuja Beatrice, “Influence of particles reinforcement and methods of incorporation of particles to enhance mechanical and metallurgical properties of weldment: A Review”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Leo Dev Wins K, Anuja Beatrice B , Ebenezer Jacob Dhas D S and Anita Sofia V S, “Artificial Neural Network and Genetic Algorithm based Models for Predicting Cutting force in Turning of Hardened H13 Steel”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Ganesan G, Gadudasu BabuRao and Rajakumar S. Rai, “Optimal Dimensional Synthesis of Double Semi-Circle and Double SemiEllipse Path Generating Adjustable Four-bar Mechanisms”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Mona Sahu, Joseph J John, Samuel Jebish J, Achsah Phebe Chrysolin, Ajit Madan, Wilson M Kumar, “Recent Ergonomic Interventions and Evaluations on Computer Workstation to Improve Health of Employees –A Review”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Mona Sahu, Ashin Mathew Ninan, Sam, Albin Joseph , Kondru Gnanasundari, ”An Overview of the Risk Factors Resulting in Pain in Laptop and Smartphone Users”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- D. Philip Selvaraj and P. Richard Philip, “Some studies on surface roughness of AISI 304 austenitic stainless steel in dry turning operation”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Ganesan Govindasamy, Clinton Wilson, Neeraj K, “Kinematic Analysis and Dimensional Synthesis of Filleted-Rhombus Path Generating Adjustable Four-bar Mechanism”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- R Raja, Sabitha Jannet, Allen Varughese, Joby George, “Comparative Evaluation of Mechanical properties of GFRP And Polymer Hybrid Composite”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- I. Kantharaj, Hiran Gabriel D J, D. Julius Benedict Prakash and Masepogu Wilson Kumar, “A comparison of dry and air-cooled turning of AISI 1040 steel”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- Emerald Ninolin S, “Feasibility of low Concentration Al2 O3/Water nanofluid in Compact loop heat Pipe”, in the International Conference on Mechanical Engineering Design (ICMechD 2019), held at Sri Sivasubramaniya Nadar College of Engineering Chennai during 25-26 April 2019.
- D.S. Robinson Smart “Aluminium Hybrid Metal Matrix Composite Reinforced with TaC, Ti, Si3N4 Nanoparticles - a Review” at RSRI Conference on Materials and Computational intelligence (RSRI CMCI 2018), held at Shree Rayeshwar Institute of Engineering & Information Technology, Shiroda, Goa during 28-29 September 2018.
- Jogi Krishna, P.S. Kishore,A. Brusly Solomon, ‘Experimental Study of Thermal Energy Storage Characteristics using Heat Pipe with Nano-Enhanced Phase Change Materials’, in the International Conference on Materials, Alloys,& Experimental Mechanics held at Narasimha Reddy Engineering College, Hyderabad, during 3-4, July 2017.
- Mohsen Sharifpur, A. Brusly Solomon, Josua P. Meyer, J.S. Ibrahim, Barki Immanuel, ‘Thermal conductivity and viscosity of Mango bark/water nanofluids’, in the International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, held at Portorz, Slovenia during 17-19 July 2017.
- A. Brusly Solomon,Mohsen Sharifpur, Josua P. Meyer, J.S. Ibrahim Barki Immanuel, ‘Convection heat transfer with water based mango bark nanofluids’, in the International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, held at Portorz, Sloveniaduring 17-19 July 2017
- Aldin Justin Sundararaj, Lazarus Godson Asirvatham, B.C.Pillai, Shruti Panicker, ‘Experimental Investigation of Thermo-Physical Properties of Refined Kerosene - Alumina Nanofluid’, in the International Conference on Materials Mechanics and Management , College of Engineering, Trivandrum, during 13-15 July 2017.
- P.S. Samuel Ratna Kumar, D.S. Robinson Smart, ‘ Model Analysis of MWCNT Reinforced AA5083 Composite Material’ in the International Conference on Science, Technology and Engineering Promotion, held at Kumaraguru College of Technology, Coimbatore during 18-19 August 2017.
- M. Suresh, K. Balasubramanian and S.S. Thipse, ‘Development of a Four Cylinder HCNG Blended Fuel Engine with Control of Nox Emission using Lean Burn Concept’ in the International Conference on Recent Advances in Mechanical Engineering, held at Kingston Engineering College, Vellore during 01-02 September 2017
- D.S. Robinson Smart, ‘Evaluation of Mechanical Properties of MWCNT / Nanoclay Reinforced Aluminium Alloy Metal Matrix Composite’ in the International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), held at Birla Institute of Technology & Science, Pilani, BITS Pilani, Dubai Campus from 28th November to 29th November 2017.
- D.S. Robinson Smart, Joses Jenish Smart, C Periasamy and P S Samuel Ratna Kumar, ‘Investigations of Effect of Rotary EDM Electrode on Machining performance of A16061 Alloy’ in the International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), held at Birla Institute of Technology & Science, Pilani, BITS Pilani, Dubai Campus from 28th November to 29th November 2017
- Mrunal Swaroop Peavali, G. Babu Rao, and Rama Krishna, (December 2017) “Design and development of a Mechatronics System to perform continuous Chest Compressions during Cardiopulmonary Resuscitation”, 2nd International conference Recent innovations in Engineering and Technology 2017 during 21st & 22nd December, 2017 organized by Aurora's Scientific, Technological & Research Academy Chandrayangutta, Hyderabad-05, PP:102-106
- Rajesh Ruban, Leo Dev Wins, Dr. Krishnaraj, ‘Development and Comparison of Tensile Strength, Surface Micro hardness and Micro structure of AA6061/Zrb2 and AA6061/ZrB2/SIC Aluminium metal Matrix Composite’ in the International Conference on Intelligent Systems and Control (ISCO), held at Karpagam College of Engineering, Coimbatore, during 5-6, January 2018.
- A.H. Sajeeb Rahiman, D.S. Robinson Smart, “Aluminium Carbon Nanotube Composites - A review on latest approaches”, in the International Conference on Advanced Manufacturing and Materials Science (ICAMMS 2018), held at MITS, Cochin during 15-16 January 2018.
- K. John Joshu, S.J. Vijay, D. Philip Selvaraj, “Microstructural and Mechanical Behaviour of AA7068 Reinforced with ZnO using Powder Metallurgy”, in the International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES-2018), held at National Institute of Technology, Tirchirappalli during 18-20 January 2018.
- Sabitha Jannet, “Experimental Investigations on the Friction Stir Welding of Dissimilar Aluminum Alloys”, in the International Conference on Electrical, Electornics, Computers, Communications, Mechanical and computing (EECCME-2018), held at Priyadarshini Engineering College, Vaniyambadi during 28-29, January 2018.
- I. Kantharaj, M. Sekar, X. Ajay Vasanth, S. Mohanasundaram, “Comparative study of cutting fluid application methods to improve machining conditions during surface grinding on AISI 1040 steel” in the International Conference on Engineering Materials, Metallurgy and Manufacturing - ICEMMM 2018, held at SSN College of Engineering, Kalavakkam, Chennai during 15-16 February 2018.
- S. J. Vijay, Alexandre Tugirumubano, Sun Ho Go, Lee Ku Kwac, Hong Gun Kim, “Electro spinning of PAN - Hematite Composite Nanofiber”, in the International Conference on Engineering Materials, Metallurgy and Manufacturing - ICEMMM 2018, held at SSN College of Engineering, Kalavakkam, Chennai during 15-16 February 2018.
- D. Emmanuel Sam Franklin, T.V.Christy, Nelson R, S. Mohanasundaram, “A Study on Friction Stir Welding of Al 6061- ZrB2 Metal Matrix Composites”, in the International Conference on Engineering Materials, Metallurgy and Manufacturing - ICEMMM 2018, held at SSN College of Engineering, Kalavakkam, Chennai during 15-16 February 2018.
- D. Philip Selvaraj, “Experimental analysis of surface roughness of duplex stainless steel in milling operation”, in the International Conference on Engineering Materials, Metallurgy and Manufacturing - ICEMMM 2018, held at SSN College of Engineering, Kalavakkam, Chennai during 15-16 February 2018.
- SP. Arunkumar, C. Prabha, “Prediction of Effect of Refrigeration System Parameters on the Performance of a Vapour Compression Refrigeration System Using Design of Experiments”, in the International Conference on Civil, Mechanical, Chemical Engineering & Technologies (ICCMCT 2018), held at SVS College of Engineering, Coimbatore during 23-24 February 2018.
- M. Suresh, C.P. Jawahar, “Experimental Studies on the Effect of Compression Ratio on Direct Injection Diesel Engine using Kokum Oil Biodiesel Blends”, in the International Conference in Chemical, Environmental & Energy Engineering (RACEEE-2018), held at Sri Sivasubramaniya nadar College of Engineering, Chennai during 15-16, February 2018.
- A. Gaith Franklin, G. Jims John Wessley, S.J. Vijay, “Fabrication and Mechanical Characterization of Stir Cast AA6063-Borosilicate-Fly Ash Hybrid Metal Matrix Composites”, in the 6th International Conference on Contemporary Engineering and Technology-2018 (ICCET 2018), held at Prince Shri Venkateshwara padmavathy Engineering College, Chennai on 10th March 2018.
- S. Rajesh Ruban, K. Leo Dev Wins, “Analyzing the Metallurgical Properties of Al[6061] Reinforced with Zrbz and Sic”, in the International Conference on Advances in Engineering and Technology (ICAET 2018), held at Karpagam Academy of Higher Education, Coimbatore during 8-9, March 2018.
- B. Anuja Beatrice, E. Kirubakaran, K. Leo Dev Wins, P. Ranjit Jeba Thangaiah, Vipin Gopan, C. Beulah Christalin Latha, “Artificial Neural Network and Genetic Algorithm ased Models for Predicting Cutting Force in Turning of Hardened H13 Steel”, in the 8th International Conference on Engineering and Advancement in Technology, held at Sri Krishna College of Technology, Coimbatore during 22-23 March 2018.
- Kondru Gnana Sundari, Lazarus Godson Asirvatham, T Michael N Kumar, Joseph John Marshal, Sai Ramya K, “An Overview of AL203 Nanoparticles in Automobile Cooling System”, held at Sri Krishna College of Technology, Coimbatore during 22-23 March 2018.
- Arjun S, Shone Henry, Nirmal Mathen Kurian, Jafi Wise, Sam Paul, “Effect of Base Material on Vibration in Rotating machinery with Rheological Damper”, in the 8th International Conference on Science and Innovative Engineering 2018, held at Jawahar Engineering College, Chennai on 1, April 2018.
- A.H.Sajeeb Rahiman, D.S. Robinson Smart, “Damping Characteristics of Aluminium Matrix Composites - A Review”, in the International Multi-Conference on Computing, Communication, Electrical & Nanotechnology (I2CN-2K18), held at Mangalam College of Engineering, Kottayam during 26-27, April 2018.
- Emerald Ninolin Stephen, Lazarus Godson Asirvatham, Ramachandran, Brusly Solomon and Gnana Sundari Kondru, “Comparative study on the thermal performance of compact loop heat pipe with Al2O3/water and Ag/water nanofluid”, in the International Conference on Thermal Analysis and Energy Systems (ICTAES-2018), held at Hindusthan College of Engineering and Technology, Coimbatore during 12-13, April 2018.
- K. John Joshua, S.J. Vijay, D. Philip Selvaraj, V. Rubesh Raja, “Comparison of Microhardness and Microstructural Behaviour of AA7068/MgO and AA7068/ZnO Metal Matrix Composites”, in the 2nd International Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST’18), held at NIT, Trichy during 27-28, April 2018.
- Dr. D.S. Robinson Smart, 'Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016)' Uniform Corrosion Behavior of AA7075 with Nanoclay, MLR Institute , Hyderabad, India, 7- 9, July 2016.
- Vidya Chandran, Sheeja Janardhanan, M. Sekar and V.J. Deepthi, “Numerical study on vortex induced ation of marine drilling risers under uniform and sheared flow”, ACEM 16, an International Conference, Jeju Island, Korea August 31 2016
- D.S. Robinson Smart, “Characterization of Graphite and CNT Reinforced Aluminium-5083”, 2016 5th International Conference on Engineering and Innovative Materials (ICEIM 2016), 10-12th Sep 2016, Kuala Lumpur, Malaysia. .
- D. Philip Selvaraj, has presented a research paper entitled “Optimization of Cutting Force of Duplex Stainless Steel in Dry Milling Operation” in the International Conference AMMMT-2016 held at Siddaganga Institute of Technology, Tumakuru during 23-24 September 2016.
- K. Prabu, M. Sekar "Tribological Study of Anti-Friction Lubricating Gear Oil with Nano Additives of Al2O3 and SiO2 Particles” in the International Conference on Smart Design & Sustainable Manufacturing (ICSD & SM’16), Alagappa College of Engineering and Technology, Karaigudi during 26-27 September 2016.
- Suresh M, Jawahar C.P, ‘Performance Evaluation and Emissions Characteristics of Variable Compression Ratio Compression Ignition Engine Fuelled with Kokum Oil Methyl Ester (Garcinia Indica)-Diesel Blends’ in the International Conference on Recent Trends in Engineering, Science & Technology (ICRTEST-2016), held at St. Peter’s Engineering College, Dullapally, Hyderabad during 25-27 October 2016
- Joseph John Marshal S, ‘Investigations on Production of Gaseous Fuel via Air Gasification of pongamia De-oiled Cake in a Fluidized Bed Reactor’ in the International Conference on Recent Trends in Engineering, Science & Technology (ICRTEST-2016), held at St. Peter’s Engineering College, Dullapally, Hyderabad during 25-27 October 2016.
- Kantharaj I, Sekar M, ‘Novel Heat Pipe Embedded U Drill for Machining Applications’ in the International Conference on Recent Trends in Engineering, Science & Technology (ICRTEST-2016), held at St. Peter’s Engineering College, Dullapally, Hyderabad during 25-27 October 2016.
- A.Vijin Prabhu, S.Antony Raja, C.Lindon Robert Lee, ‘Performance of biogas in a dual fuel CI engine’, in the International Conference on Recent Trends in Engineering, Science & Technology (ICRTEST-2016), held at St. Peter’s Engineering College, Dullapally, Hyderabad during 25-27 October 2016
- Rudrapati Victor Daniel, Savale Amit Siddhappa, Savale Bhushan Gajanan, S. Vipin Philip,Sam Paul P,“Effect of Bearings on Vibration in Rotating Machinery” in the International Conference on Advanced Material Technologies (IEAMJ), held at Dadi Institute of Engineering & Technology, Visakhapatnam, Andhra pradesh, during 27th to 28th December 2016.
- Prabhu K, 'Tribological Study of Anti-Friction Lubricating Gear Oil with Nano Additives of Abrasive Particles” in the International Conference on Advanced Material Technologies (IEAMJ), held at Dadi Institute of Engineering & Technology, Visakhapatnam, Andhra pradesh, during 27th to 28th December 2016.
- Bhushan Savale, D. S. Robinson Smart, Savale Amit Siddhappa, “Experimental Performance and Emission Characteristics Measurement of Esterified Cottonseed and Maize oil Blends with Diesel by using Variable Compression Ratio Diesel Engine" in “International Conference on Environment and Renewable Energy (ASAR-ICERE-2017” held in Pune on 8th January, 2017, organized by Asian Society for Academic Research (ASAR) and in association with Institute of Research and Journals (IRAJ) (ISO 9001:2008 certified).
- Sabitha Jannet, “Experimental Investigations on the Friction Stir Welding of Dissimilar Aluminum Alloys”, in the International Conference on Electrical, Electornics, Computers, Communications, Mechanical and computing (EECCME-2018), held at Priyadarshini Engineering College, Vaniyambadi during 28-29, January 2018.
- R. Immanuel Chelliah, Bobby P. Paul, S. Darius Gnanaraj, P. Sam Paul and Tojo K. Thomas, “Design and Development of Cost Effective Motorised Wheelchair” in the Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTD-2016), held at College of Engineering, Pune, Maharashtra, on December
- Mrunal Swaroop Peravali, Ajay Vasanth,"Automatic Irrigation System Using DTMF" in the First International Conference on Recent Innovations in Engineering and Technology (ICRIEAT), 2016 (12), pp.1667-1670
- I.Kantharaj, A. Brusly Solomon, M. Sekar, ‘Novel Heat Pipe Embedded U Drill for Machining Applications’ in the First International Conference on Hybrid and Composite Materials, Chemical processing: HCMCP-2016, held at St. Peter Engineering College, Hyderabad, during October 25-27, 2016.
- D. Philip Selvaraj,“Optimization of Surface Roughness of AISI 304StainlessSteel in Wet Turning Process” in the ‘International Conference on Recent Advances in Aerospace Engineering-ICRAAE 17’ , held at Karunya University, Coimbatore, during 3-4, March 2017.
- K. John Joshua,S.J. Vijay, P. Ramkumar, D.Philip Selvaraj, KIM, Hong Gun, “Investigation of Microstructure and Mechanical Properties of AA7068 Reinforced with MgO Prepared using Powder Metallurgy” in the ‘‘International Conference onRecentAdvances in Aerospace Engineering-ICRAAE 17’, held at Karunya University, Coimbatore, during 3-4, March 2017.
- " K. John Joshual, S.J. Vijay, KIM, Hong Gun, P. Ramkumar, ‘Review on Metal Matrix Composites of Powder Metallurgy and Stir Casting Techniques - A Comparative Study’ in the International Conference on Recent Advances in Mechanical Engineering (ICRAMEK’17) held at Government College of Engineering, Salem, during 2-3, March 2017."
- J.Eric David Praveen,D.S. Robinson Smart, Babu.R,S. Rajesh Ruban, ‘Investigations on Mechanical Behaviour of LM 13/SiC/Gr Hybrid Composite Using Compocasting Method’ in the ‘‘International Conference onRecentAdvances in Aerospace Engineering-ICRAAE 17’, held at Karunya University, Coimbatore, during 3-4, March 2017.
- V.K .Shahir, C.P. Jawahar, P.R. Suresh, V. Vinod, ‘Experimental Investigation on Performance and Emission Characteristics of a Common Rail Direct Injection Engine using Animal Fat Biodiesel Blends’ in the International Conference on Power Engineering Computing and CONtrol, held at VIT University, Chennai, during 2-4, March 2017.
- Prawin Angel Michael, C.P. Jawahar, ‘Design of 15 kW Micro Hydro Power Plant for Rural Electrification at Valara’ in the International Conference on Power Engineering Computing and CONtrol, held at VIT University, Chennai, during 2-4, March 2017.
- M. Sekar,Savale Amit Siddhappa and Kantharaj I., ‘Machining Chatter analysis for High Speed Milling Operations’ in the International Conference on Recent Advances in Aerospace Engineering (ICRAAE 17), held at Karunya University, Coimbatore, during 3-4, March 2017.
- Gerald Chandrashekar, Winston Raj, Charles Godwin,P. Sam Paul, ‘Study on the Influence of Shaft Material on Vibration in Rotating Machinery’ in the International Conference on Materials, Manufacturing and Modelling, held at VIT University, Vellore, during 9-11, March 2017.
- P. Jayaseelan, T.V Christy, T. Nathanael Ranjit Singh ‘Behavior of threaded cylinder tool in the friction stir welding of Al-SiC composite’ in the SecOne International Conference on Advances in Materials, Manufacturing and Applied Sciences (ICAMMAS’17) held at Sri SAI RAM institute of Technology, Chennai, during 30-31, March 2017
- S. Vipin Philip,J David Raja Selvam, Rajakumar S. Rai,P M Mashinini, “Microstructure characterization of insitu formed Al2O3-TiB2 AMCs particles on AA6061 Aluminium Matrix composites”, International Conference on Advances in Materials, Manufacturing and Applied Sciences (ICAMMAS ’17) held at Sri SAI RAM Institute of Technology, Chennai, during 30-31, March 2017
- Godwin. J .Sobin, Clinton Keith Sam. S, Hari krishnan.G, Daniel.E,Sam Paul.P,‘Effect of bearing location on vibration in rotating machinery’ in the International conference on Engineering Technology and Science (ICETS17) held at Muthayammal Engineering College, Namakkal, during March 30-31,2017.
- M.Wilson Kumar, S.J.Vijay,S. Darius Gnanaraj, “An Experimental Study on the Wheel Size of an Industrial Trolley,” in the International Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST 2017), held at NIT Trichy during 31st March and 1st April 2017, (Proceedings pages 47-51.)
- Mona Sahu,S. Darius Gnanaraj, “An Evaluation of prevalence of Complaints of Eye, Arm, Neck, Shoulder and back and Risk Factors Among IT Professionals in India’, in the International Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST 2017), held at NIT Trichy during 31st March and 1st April 2017, (Proceedings pages 47-51.)
- K. John Joshua,S.J. Vijay, P. Ramkumar, D. Philip Selvaraj,“Production and Characterization of Al 7068 Metal Matrix Composites reinforced with Magnesium Oxide using Powder Metallurgy,” in the International Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST 2017), held at NIT Trichy during 31st March and 1st April 2017, (Proceedings pages 47-51.)
- S. Rajesh Ruban,V. Nisanth, K. Kevin Jegan Raj, J. Albinus Hadrian, G. Sampras, “Design and Analysis of Exhaust Mainfold” in the 2nd International Conference on Modelling, Simulation and Control (ICMSC-2017), held at Karpagam College of Engineering, Coimbatore during 1st April 2017 to 2nd April 2017
- V.K. Shahir, C.P. Jawahar,P.R. Suresh, V. Vinod, “Experimental investigations on the Performance and Emission Characteristics of a Common Rail Direct Injection Engine Fuelled with jatropha Biodiesel” in the International Conference on Current Research on Algae Biology and Biomass (CRABB) - 2017, held at Ramachandra College of Engineering, Eluru, Andhra Pradesh during 7th April 2017 to 8th April 2017.
- M. Suresh, C.P. Jawahar,R. Rohith Renish, “Experimental investigations on the Performance and Emission Characteristics of Variable Compression Ratio Compression Ignition Engine Fuelled with Argemeon Mexicana Oil (Mexican Poppy) Biodiesel Blends” in the International Conference on Current Research on Algae Biology and Biomass (CRABB) - 2017, held at Ramachandra College of Engineering, Eluru, Andhra Pradesh during 7th April 2017 to 8th April 2017.
- G.Babu Rao, S. Darius Gnanaraj and S.Ramachandran, (May 2017) “ Experimental Study of External Chest Compressions During Cardiopulmonary Resuscitation (CPR) on Manikin by A Mechanical Device”,First International Conferenceon Interdisciplinary approach in Science and Technology (ICIAST’17) during19thand 20thMay 2017heldat Baan Sukhawada House, Educational Gardens, Pattaya, Thailand, by Association for Inter-disciplinary Research in Science and Technology, PP:16-17
- Grace Jency, Sekar. M., “Packaging in MEMS Piezoresistive Accelerometers: a Review”, 4th International Conference on ‘Microelectronics, Circuits and Systems’, Micro2017, June 4-5 2017, Applied Computer Technology, Kolkata, India.
- A. Vijin Prabhu, S. Antony Raja, C. Lindon Robert Lee, P. Jeba, "Anaerobic digestion of Biomass Waste in Batch and Continuous Operation", in the International Conference on Modelling, Simulation and Control (ICMSC-2017), Karpagam College of Engineering, Coimbatore, pp.306-608.
- Vijay. S.J, A study on friction stir surfacing of Al/B4C MMCs over Al substrate, International Conference on ‘Advances in Cutting Welding and Surfacing’, Coimbatore Institute of Technology, Coimbatore, August 5-7, 2015
- Sabitha Jannet, Koshy Mathews P, Murugan N, Prediction of wear rate of friction stir welded dissimilar aluminum alloy using artificial neural network, International Conference on Advances in Cutting, Welding and Surfacing (ICCWS 2015),August5-7, 2015
- D.S. Robinson Smart, Analysis of the corrosion behaviour of AA7075 with Nanoclay, International Conference on Advances in Cutting, Welding and Surfacing (ICCWS 2015) ,Coimbatore Institute of Technology, Coimbatore , August5-7, 2015
- Jayaseelan P, Friction stir welding process on aluminum MMCs through reverse dual rotation/ Review, International Conference on ‘Advances in Mechanical Engineering’ (ICAME-2015) , Anna University, University College of Engineering, Villupuram, October 15-16, 2015
- Suresh M, Walter Karg R, Rohith Renish, Viraal Nemani, Design and analysis of dynamic electromagnetic suspension system for improved vehicle stability , International Conference on Modelling Simulation and Control (ICMSC’15), Karpagam College of Engineering, Coimbatore , October 15-16, 2015.
- Rajesh Ruban S, Leo Dev Wins, David Raja Selvam J, Sandeep Kiran, Fabrication and characterization of in-situ formed ZrB2 and SiC particulate reinforced A6061 matrix composites, International Conference on Modelling Simulation and Control (ICMSC’15) , Karpagam College of Engineering, Coimbatore , October 15-16, 2015.
- Ramachandran R, Lazarus Godson Asirvatham. Ganesan K, Thermal Gauging of Screen Wick Heat Pipe using Hybrid Nanofluid, International Conference on ‘Advances in Mechanical Engineering’ (ICAME-2015),Anna University, University College of Engineering, Villupuram, , October 15-16, 2015
- Sampaul P, Vibration Analysis of Aircraft Landing Gear with Smart, International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) , Karpagam College of Engineering, Coimbatore , February 19-20, 2016.
- Rajesh Ruban S, Effect of Dry Sliding Wear Behavior of AA6061/ZrB2/sic Hybrid Composite, International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) , Karpagam College of Engineering, Coimbatore , February 19-20, 2016.
- David Raja Selvam J., Robinson Smart D.S., Rajesh Ruban S, The tensile behavior of P-GTA welds obtained with indirect electric arc on compocast AA6061/Fly ash composite. , International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016), Karpagam College of Engineering, Coimbatore, February 19-20, 2016.
- Jayaseelan P., Christy T.V., Rajesh Ruban S., Prabhu Rubesh G, Reverse Dual Rotaion Friction Stir Welding Process In Al-MMCs, International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) , Karpagam College of Engineering, Coimbatore , February 19-20, 2016.
- Rajesh Ruban S., Leo dev Win, David Raja Selvam J., Arun Richard, Effect of dry sliding wear behavior of AA6061/Zrb2/SiC Hybrid Composite’, International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) , Karpagam College of Engineering, Coimbatore , February 19-20, 2016.
- Prabu K, Analysis of Tribological Properties of Lubricating Gear Oil with Nano Silica Particles, International Conference on Fascinating Advancement in Mechanical Engineering (FAME2016) , MEPCO Schelnk Engineering College, Sivakasi , March 18-19, 2016
- R Robinson Gnanadurai, J Pradeep Kumar, Optimization of Minimal Fluid Application Parameters during Hard Turning for Improving Cutting Performance, International Conference on Mechanical Engineering Research and Intelligence Technologies, Nehru Institute of Engineering and Technology, Coimbatore, March 30-31, 2016.
- Emerald Ninolin S., Godson Asirwatham, Thermal Performance of a compact loop heat pipe with silver water nanofluid, International Conference on Mechanical Engineering and Design, SSN College of Engineering, Chennai , April 25-26, 2016
- Mohanasundaram S, A Review on developing surface composites using friction surfacing, International Conference on Mechanical Engineering and Design, SSN College of Engineering, Chennai, April 25-26, 2016
National Journal Publications
- Mrunal Swaroop Peavali, G.Babu Rao, Rama Krishna, “Design and development of a Mechatronics System to perform continuous Chest Compressions during Cardiopulmonary Resuscitation”, Indian Journal of Scientific Research (IJSR), January 2018; 17(2) pp.102-106. publication in U.G.C approved Journal.
- G. Babu Rao, “Effect of the Geometry of a Parallel Manipulator on the Depth of Chest Compression” Hindustan Journal of Mechanical Sciences, A Journal of Hindustan Institute of Technology & Sciences, Chennai, India,. Vol.No.1, August 2016, pp. 1 to 5.
National Conferences
- Kevin George Thomas (PRK18ME4003), Biswaji Nath, R. Joel Jackson, H.Sharon, inthe National conference on Energy and Chemicals from Biomass (NCECB) “Combustion Characteristics Assessment of Diesel Engine Fueled by Diesel-Butanol-Used Cooking Oil Biodiesel Blends” held at Pondicherry Engineering College, Puducherry during 10-11,October 2019.
- C.Prabha, SP. Arunkumar, H.Sharon, R. Vijay, A. Mohammed Niyas, P Stanley, in the National conference on Energy and Chemicals from Biomass (NCECB) “Performance and Combustion Analysis of Biodiesel Obtained by Pyrolysis of Polyalthia LongifoliaSeeds” held at Pondicherry Engineering College, Puducherry during 10-11, October 2019.
- P. Jayaseelan, T.V Christy, S.J Vijay, V. Naveen, in the National Conference on Recent Advances in Welding Processes, Automation, Power Sources & Consumables(WAPCON 2019), “DETERMINATION OF OPTIMAL FRICTION STIR WELDING TOOL FOR ALUMINUM METAL MATRIX COMPOSITES” held at PSG College of Technology,Coimbatore during 18-19 October 2019.
- Sabitha Jannet, R. Raja, S. J. Vijay, in the National Conference on Recent Advances inWelding Processes, Automation, Power Sources & Consumables (WAPCON 2019),“OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION STIR WELDEDDISSIMILAR ALUMINUM ALLOYS AA 6061-T6 AND AA 7075-T651” held at PSGCollege of Technology, Coimbatore during 18-19 October 2019.
- R. Raja, 3rd National e-Conference on "Recent developments in Al7075 hybridcomposites and study on its microstructure and mechanical characteristics" on “Recent Innovations & Advanced Trends in Mechanical Engineering -NCRIATME - 2020” held at Aarupadai Veedu Institute of Technology, from 25th June 2020 to 26th June 2020.
- L. Godson Asirvatham, “Heat Transfer Characteristics of Nanoceated loop heat pipe”,in the National Conference on Emerging Vistas of Engineering and Management(NCEVEM’19), held at Viswajyothi College of Engineering and Technology, Muvttupuzhaduring 29-30, March 2019.
- P. Sam Paul, “Emerging Trends in Vibration”, in the National Conference on Emerging Vistas of Engineering and Management (NCEVEM’19), held at Viswajyothi College of Engineering and Technology, Muvttupuzha during 29-30, March 2019.
- D. Emmanuel Sam Franklin, T.V. Christy, Nelson. R, S. Mohanasundaram, ‘Solid state welding of A1 6061-ZrB2 MMC’ in the National Conference on Surface Science and Technology (NCSST 2017), held at VIT University, Chennai during 10-11 November 2017.
- Jerin Jose, T.V. Christy, ‘A review on Fabrication, Metallurgical Characterization and Applications of ‘Cenosphere’ based Aluminum Syntactic Foams’ in the National Conference on Surface Science and Technology (NCSST 2017), held at VIT University, Chennai during 10-11 November 2017.
- Jerin Jose, T.V. Christy, ‘A review on Recent Advancements in B4C based Metal Matrix’ in the National Conference on Surface Science and Technology (NCSST 2017), held at VIT University, Chennai during 10-11 November 2017.
- J. Sudhan Raj, T.V. Christy, S. Darius Gnanaraj, ‘Effect of Calcium Sulphate Whiskers on the Friction and Wear Characteristics on Non-Absestos Organic (NAO) Brake Friction Materials’ in the National Conference on Surface Science and Technology (NCSST 2017), held at VIT University, Chennai during 10-11 November 2017.
- P.S. Samuel Ratna Kumar, D.S. Robinson Smart, ‘ Model Analysis of MWCNT Reinforced AA5083 Composite Material’ in the International Conference on Science, Technology and Engineering Promotion, held at Kumaraguru College of Technology, Coimbatore during 18-19 August 2017.
- Kevin Gnanaraj, T Vijay Kanth, Babu Rao, Rajkumar Rai, Joysingh J, Rabindran I, Dr. J. Gnanaraj, ‘Easy Patient Transport System for Rural Hospitals: A Proposed System’, articles in mdCurrent India, January 2018; 7
- Kantharaj I, “A Novel Wi-fi Embedded System to Measure and Analyse Temperatures in Metal Cutting” in the National Conference on Emerging Trends in electrical, Electronics and Computer Engineering (NCEEECE’18) held at JCT College of Engineering and Technology, Coimbatore on 4th April 2018.
- Jawahar C.P, ‘Thermodynamic studies on Ammonia-Water two stage Absorption compression (hybrid) cycle’ in the National Conference on Refrigeration and Air-Conditioning 2018 (5th NCRAC 2018), held at National Institute of Technology, Karnataka, during 24-26, May 2018.
- Prabha C, SP. Arunkumar, Aldous D Kisho, ‘Performance and Emission Evaluation of a Biodiesel (Rice Bran Oil Methyl Ester Fuelled Transportation Diesel Engine With and Without EGR’ in the National Conference on Technologies for Green Mobility (NCTGM’17), held at Bannari Amman Institute of Technology, Sathyamangalam, during 10-11, March 2017.
- Aldous D Kisho,Prabha C,‘Performance Evaluation of Diesel Engine Using Silk Cotton Seed Oil’ in the National Conference on Instrumentation, Control, and Signal Processing NCICS’17, held at Karunya University, Coimbatore on 17th, March 2017.
- Kalakanda Alfred Sunny, Nallapaneni Manoj Kumar, Harithra. M, andRajakumar S. Rai, “Development and Performance Investigation of Supersonic Blow-down Wind Tunnel”, in the National Conference on advances in control, power, energy and electronic systems ACPEES 2017, held at Bharat Institute of Engineering and Technology, Hyderabad, Telangana on 24-26 March 2017. .
- V.K.Shahir,C.P.Jawahar,P.R.Suresh, V.Vinod, ‘Experimental Investigations on the Performance Characteristics of a Common Rail Direct Injection Engine Fuelled with Tyre Pyrolysis’ in the National Conference on Latest Trends in Mechanical Engineering NCLTME-2017, held at NSS College of Engineering, palakkad, during 23-25 March 2017.
- R.Raja,Mithu Andrews Thambi,Sabitha jannet,‘Synthesis and Characterisation of Aluminium Matrix Composite Reinforced with Nano Sized SIO2 Particles with Different Weight’ in the National Conference on ‘Energy Efficient Mechanical System Design and Manufaturing’ held at PSG College of Technology, Coimbatore, on 27th April 2017
- Jobel Jose,C.P. Jawahar,‘Experimental Investigation on Cold Fusion Nuclear Reaction Process – A Parametric Study, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Rudrapati Victor Daniel,Lawrance G, Sam Paul P., “Vibration Analysis of Boring Tool Holder for Hardened AISI4340 Steel”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- S. Manova,M. Sekar, A. Brusly Solomon, “Analytical Expression for Thermal Conductivity of Heat Pipe with Nano Fluids”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Jocin Varghese,A. Brusly Solomon,“Fabrication, Testing and Visualization of Electrochemically Wicked Heat Pipe”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Joseph John Marshal S, T. Michael N Kumar, Z. Robert Kennedy, Georgy J Mavely, “Solar Assisted Pyrolysis of Pongamia Deoiled Cake using Parabolic Dish Collector: Effect of Temperature and Particle Size on Product Distribution and Gas Composition”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- D. S. Ebenezer Jacob Dhas, C. Velmurugan, “Experimental Investigations on Electric Discharge Machining of Al 5052/WC-P/Graphite-Phybrid Composite”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Nirmal Mathen Kurian,Bobby P Paul,Arjun S, Shone Henry, “Design and Fabrication of a Special Feeder for Persons with Parkinson’s Diseases”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Savale Bhushan Gajanan,D.S. Robinson Smart,Rudrapati Victor Daniel, Charles Godwin R, “Bending Stress Analysis of Composite Spur Gear using Ansys Workbench”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Gerald Chandrashekar, M.Wilson Kumar, Madhurima Pachigalla, “Design and Fabrication of an Assistive Device to Support the Basic Movements for Aged People”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Hari Krishnan.G,Lawrance. G, Sam Paul. P,“Computational Analysis of Boring Tool Holder with Damping Force”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- P. Sam Paul, X. Ajay Vasanth,“Effect of Magneto Rheological Fluid Damper on Cutting Force during Turning of Hardened Steel”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Santhana Jones,Babu Rao G,“Design and Development of a Digital Fuel Level Indicator using PLC and SCADA for Two Wheelers”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Josua RajanG, Babu Rao G,“Automatic Control of Fluid Power System of a Machine Using Programmable Logic Controller”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Marshal Revanth C,Babu Rao G,“Conceptual Modeling and Development of 5 D of Scara Robot for Poultry Farming”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Balasubramanian. K, Sushant C. Thomas, Yasir Haneef, Savio Silvester, “Driverless Vehicle using GSM Network”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Fernando Winston Raj,Sam Paul. P, X. Ajay Vasanth,“Influence of Different Hardness of Aisi4340 Steel on AE Signal during Turning Process”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Anto Jude Samuel Roy, Trijo Tharayil, Fewin Samuel, Lazarus Godson Asirvatham, “Heat Transfer Performance of Nano Coated Miniature Loop Heat Pipe With Graphene-Water Nanofluid”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Fewin Samuel, Anto Jude Samuel Roy, Trijo Tharayil,Lazarus Godson Asirvatham,“Effect of Nanoparticle Coating at Evaporator on the Thermal Performance of Miniature Loop Heat Pipe”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Harish Venkatesh, Trijo Tharayil,Lazarus Godson Asirvatham.,“Performance of Miniature Heat Pipe for Cubesat Applications”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- A. Vijin Prabhu,S. Antony Raja, C. Lindon Robert Lee,P. Jeba, “Effect of Cow Manure on the Anaerobic Digestion of Biomass Waste”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Kanna Sai Krishna,Lijin George, D.S. Robinson Smart,“Reduction of Drag on Flat Faced Transport Vehicles.”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Anil Raj, K.Leo Dev Wins, A. S. Varadarajan, “Optimization of Cutting Parametres During Hard Turning of Ohns Steel”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Anil Raj, K.Leo Dev Wins, A. S. Varadarajan, “Optimization of Fluid Application Parameters during Hard Turning of AISI H13 Tool Steel with Minimal Cutting Fluid Application”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Arthur Joel, Yaswanth, Uma Soren, Divya,R. Raja, Sabitha Jannet,“Synthisis and Characterisation of Polymer Matrix Composites”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Raghavi S,Rajakumar S Rai,“Productivity Improvement in MD13 Inlet Manifold Cell with the Aid of SWCT, SOC and Yama-Zumi Charts”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- G. Ajith Kumar,M. Sekar, G. Ganesan,“Harmonic Spacing Precision Points”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Kondru Gnana Sundari, Lazarus Godson Asirvatham,T. Michael N. Kumar, Jesse Aron, “Heat Transfer Enhancement using Glycerin/Al2O3Nanofluid in Radiator Cooling Applications.”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Lindon Robert Lee,I. Jude Samuel, “Combustion Modeling of Vu60 Boiler using Computational Fluid Dynamics”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- G Prabhu Rubesh, S. Rajesh Ruban,Arun Richard, Cibi Niranjan, “Design and Fabricate a Pneumatic Injection Moulding Machine”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Rithin Roy,Joseph John Marshal.S,Jagadish Babu, “Charaterisation of Gas and Oil Obtained from Pyrolysis of Rubber Shells”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Sachine Sebastian,Joseph John Marshal S, Jagadish Babu, “Characterization of Gas and Oil Obtained from Pyrolysis of Coir Pith”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Charles Godwin R,D.S. Robinson Smart, Savale Bhushan Gajanan, “Design of Hybrid Power Generation Unit by Tapping the Energy during the Vehicle Movement”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Johann George Mathew, K. Shashipreetham, J. Larsen, R. Vimalan Paul,C.P. Jawahar,“Performance Evaluation of a Window Air Conditioning System Incorporated with a Brushless DC Motor”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- S. Mohanasundaram,E. Kirubhaharan, S. J. Vijay,Rajkumar S. Rai,“Al–B4C Composite Surface Coating Over AA6061 Substrate”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Infant Xavier YeshwanthFdo A , Aldrin Rathnakumar, R,Mona Sahu,“Automation of Online Saw Dust Arrangement for Seawater Cooled Condensers”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- G Prabhu Rubesh,Edwin Paul Raj A, Bhavana K, “Tensile and Wear Behaviour of Aluminium Alloy Lm6 Reinforced With Magnesium and Copper”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Jafi Waise, Pranav Chourasia,Kantharaj I,“Improved Cooling Application using MQL in grinding process”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Eli Yash Raj Singh,Vijay S.J.,“Mechanical and metallurgical characterization of Aluminum alloy (5052) welded using A-TIG Processes”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- G Prabhu Rubesh,Edwin Paul Raj A, Bhavana K, “Reinforcement of Aluminium Alloy Lm6 with B4C and SiC to Enhance the Mechanical Properties, Tensile, Wear, and Hardness”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- Libin John,Bobby. P. Paul,“Review of Additive Manufacturing in Micro Air Vehicle”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- P. Jayaseelan, T.V. Christy,T. Nathanael Ranjit Singh, A. Michael Pandian, Monami Datta, “A Review on Effect of Tool Material and Tool Profile in Friction Stir Welding Process”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.
- M.Suresh,Jerin V.John, R.Saravanakumar, “Development and Test analysis of fade stop brke cooler”, in the National Conference on Innovations in Mechanical Engineering (NCIME’17), held at Department of Mechanical Engineering, Karunya University, Coimbatore on 20th April 2017.