Conference Pubications
S.No | Authors' names (sequence as in paper) | Title of the Paper | Name of Conference | Venue | Date |
1 | P.S. Samuel Ratna Kumar, S.John Alexis, D.S. Robinson Smart | Uniform Corrosion behavior of AA7075 with Nanoclay | International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016) | MLR Institute of Technology , Hyderabad | July 7-9, 2016. |
2 | Vidya Chandran, Sheeja Janardhanan, M. Sekar, V.J. Deepthi | Numerical study on the vortex induced vibration of marine drilling risers under uniform and sheared flow | World Congress on Advances in Civil, Environmental, and Material Research (ACEM16) | Jeju Island, Korea | August 26- September 1, 2016. |
3 | D.S. Robinson Smart, Nithin P johns, Joses Jenish Smart | Mechanical characterization of graphite and CNT reinforced aluminium 5083 | International Conference on Engineering and Innovative Materials (ICEIM 2016) | Kuala Lumpur, Malaysia | September10-12, 2016. |
4 | D. Philip Selvaraj | Optimization of cutting force of duplex stainless steel in dry milling operation | International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMT 2016) | Siddaganga Institute of Technology, Karnataka | September23-24 2016. |
5 | K. Prabhu, M.Sekar, B.Nalini, B.Suresha | Tribological study of antifriction lubricating gear with nano additives of Al2O3 and SiO2 Particles | International Conference on Smart Design and Sustainable Manufacturing (ICSD & SM 2016) | Alagappa Chettair College of Engineering & Technology, Karaikudi | September 26-27, 2016 |
6 | M. Suresh | Performance evaluation and emissions characteristics of variable compression ratio compression ignition engine fuelled with kokum oil methyl ester (Garcinia Indica)-diesel blends | International Conference on Current Research Topics in Power, Nuclear, Fuel and Energy (PNFE 2016) | St. Peter’s Engineering College Hyderabad | October 25-27, 2016 |
7 | C.P. Jawahar | Performance evaluation and emissions characteristics of variable compression ratio compression ignition engine fuelled with kokum oil methyl ester (Garcinia Indica)-diesel blends | International Conference on Current Research Topics in Power, Nuclear, Fuel and Energy (PNFE 2016) | St. Peter’s Engineering College Hyderabad | October 25-27, 2016 |
8 | Joseph John Marshal S | Investigations on production of gaseous fuel via air gasification of pongamia de-oiled cake in a fluidized bed reactor | International Conference on Current Research Topics in Power, Nuclear, Fuel and Energy (PNFE 2016) | St. Peter’s Engineering College Hyderabad | October 25-27, 2016 |
9 | Kantharaj I, A. Brusly Solomon, M.Sekar | Novel heat pipe embedded U drill for machining applications | International Conference on Hybrid and Composite Materials, Chemical Processing (HCMCP 2016) | St. Peter’s Engineering College Hyderabad | October 25-27, 2016 |
10 | A.Vijin Prabhu, S. Antony Raja, C. Lindon Robert Lee | Performance of biogas in a dual fuel CI engine | International Conference on Current Research Topics in Power, Nuclear, Fuel and Energy (PNFE 2016) | St. Peter’s Engineering College Hyderabad | October 25-27, 2016 |
11 | R. Immanuel Chelliah, Bobby P. Paul, S. Darius Gnanaraj, P. Sam Paul, Tojo K. Thomas | Design and development of cost effective motorized wheel chair | All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) | College of Engineering, Pune | December 16-18, 2016. |
12 | Mrunal Swaroop Peravali, Ajay Vasanth | Automatic irrigation system using DTMF | International Conference on Recent Innovation in Engineering and technology (ICRIEAT 2016) | Hotel Katriya, Hyderabad | December 22-23, 2016. |
13 | K. Prabhu, B. Nalini, B. Sureka, M. Sekar | Tribological study of antifriction lubricating gear oil with nano additives of abrasive particles | International Conference on Advanced Materials Technologies (ICAMT-2016) | Dadi Institute of Engineering and Technology, Visakhapatnam | December 27-28, 2016. |
14 | Rudrapati Victor Daniel, Savalae Amit Siddhappa, Savale Bhushan Gajanan, S. Vipin Philip, P. Sam Paul | Effect of bearings on vibration in rotating machinery | International Conference on Advanced Material Technology (ICAMT 2016) | Dadi Institute of Engineering and Technology, Visakhapatnam | December 27-28, 2016 |
15 | Savale Bhushan Gajanan, D.S. Robinson Smart, Savale Amit Siddhappa, Kulkarni Bramhanand R, Dabhole Onkar S | Experimental performance and emission characteristics measurement of esterified cotton seed and maize oil blends with diesel by using variable compression ratio diesel engine. | International Conference on Environment and Renewable Energy (ICERE) | Pune | January 8, 2017. |
16 | K. John Joshua, S,J, Vijay, KIM, Hong Gun, P. Ramkumar | Review on metal matric composites of powder metallurgy and stir casting technologies- A comparative study | International Conference on Recent Advances in Mechanical Engineering (ICRAMEK 2017) | Government College of Engineering Salem | March 2-3, 2017. |
17 | V.K. Shahir, C.P. Jawahar, P.R. Suresh, V.Vinod | Experimental investigation on performance an emission characteristics of a common rail direct injection engine using animal fat biodiesel blends | International Conference on Power Engineering, Computing and Control (PECCON-2017) | VIT University Chennai | March 2-4, 2017. |
18 | Prawin Angel Michael, C.P. Jawahar | Design of 15 kW micro hydropowerplant for rural electrification at Valara | International Conference on Power Engineering, Computing and Control (PECCON-2017) | VIT University Chennai | March 2-4, 2017. |
19 | D.Philip Selvaraj | Optimization of surface roughness of AISI 304 stainless steel in wet turning | International Conference on Recent Advances in Aerospace Engineeering (ICRAAE 2017) | Karunya University Coimbatore | March 3-4 2017. |
21 | K. John Joshua, S.J. Vijay, P. Ramkumar,Hong Gun Kim | Investigation of microstructure and mechanical properties of AA7068 reinforced with MgO prepared using powder metallurgy | International Conference on Recent Advances in Aerospace Engineeering (ICRAAE 2017) | Karunya University Coimbatore | March 3-4 2017. |
22 | M. Sekar, Savale Amit Siddhappa, Kantharaj I | Machining chatter analysis for high speed milling operations | International Conference on Recent Advances in Aerospace Engineeering (ICRAAE 2017) | Karunya University Coimbatore | March 3-4 2017. |
23 | J. Eric David Praveen, D.S. Robinson Smart, Babu R, N.Gnanaprakash | Investigations on mechanical behaviour of LM 13/SiC/Gr hybrid composite using compocasting method | International Conference on Recent Advances in Aerospace Engineeering (ICRAAE 2017) | Karunya University Coimbatore | March 3-4 2017. |
24 | D.S. Robinson Smart | Shape Optimization of Submersible Pump Impeller Design | |||
25 | D. Sam Paul | Study on the influence of shaft material on vibration in rotating machinery | International Conference on Materials, Manufacturing and Modelling (ICMMM) | VIT University Vellore | March 9-11, 2017. |
26 | P. Jayaseelan, T.V. Christy, T. Nathanael Ranjith Singh | Behaviour of friction stir welding threaded cylinder tool, material and D/d ration on Al-SiC | International Conference on Advances in Materials, Manufacturing and Applied Sciences (ICAMMAS17) | Sri Sai Ram Institute of Technology | March 30-31, 2017. |
27 | S. Vipin Philip, J David Raja Selvam, Rajkumar S Rai, P.M. Mashinini | Microstructure characterization of insitu formed Al2O3-TiB2 AMCs particles on AA6061 aluminum matrix composites | International Conference on Advances in Materials, Manufacturing and Applied Sciences (ICAMMAS17) | Sri Sai Ram Institute of Technology | March 30-31, 2017. |
28 | Sam Paul.P | Effect of bearing location on vibration in rotating machinery. | International Conference On Engineering Technology And Science | Muthayammal Engineering Institutions, Tamil Nadu | March 30-31, 2017. |
29 | Mona Sahu, S Darius Gnanaraj | An evalution of prevalence of complaints of eye, arm, neck,s houlder and back and risk factors among IT professionals in India | International Conference on Frontiers in Engineering, Applied Sciences and Technology | National Institute of Technology, Trichy | March 31st and April 1st 2017 |
30 | M.Wilson Kumar, S.J. Vijay, S. Darius Gnanaraj | A Experimental study on the wheel size of an industial trolley | International Conference on Frontiers in Engineering, Applied Sciences and Technology | National Institute of Technology, Trichy | March 31st and April 1st 2017 |
31 | P. Ramkumar, D.Philip Selvaraj | Production and characterization of Al 7068 Metal Matrix Composites reinforced with Magnesium Oxide using Powder Metallurgy’ | International Conference on Frontiers in Engineering, Applied Sciences and Technology | National Institute of Technology, Trichy | March 31st and April 1st 2017 |
32 | S. Rajesh Ruban | Design and analysis of exhaust manifold | International Conference on Modeling, Simulation and Control | Karpagam College of Engineering , Coimbatore | April 1-2, 2017. |
33 | M.Suresh, C.P. Jawhar | Experimental investigations on the Performance and Emissions characteristics of variable compression ration compression Ignition Engine Fuelled with Argemeon Mexicana Oil (Mexical Poppy) Biodiesel Blends | International Conference on Current Research on Algae Biology and Biomass | Ramachandra College of Engineering, Andra Pradesh | April 7 -8, 2017. |
34 | C.P.Jawahar | Experimental Investigations on the Performance and Emission characteristics of a common rail Direct Injection Engine Fuelled with Jatropha Biodiesel | International Conference on Current Research on Algae Biology and Biomass | Ramachandra College of Engineering, Andra Pradesh | April 7 -8, 2017. |
35 | G. Babu Rao, S. Dariaus Gnanaraj, S. Ramachandran | Experimental study of external chest compressions during cardiopulmonary resuscitation (CPR) on mankin by a mechanical device | International Conference on Interdisciplinary Approach in Science and Technology | Baan Sukhawade, Thailand | May 19-20, 2017. |
36 | M.Sekar | Packaging in MEMS Piezoresistie Accelerometers: a Review | International Conference on Microelectronics, circuits and Systems | Darjeeling | June 3-4, 2017 |
S.No | Authors' names (sequence as in paper) | Title of the Paper | Name of Conference | Venue | Date |
1 | Vijay. S.J, Mohanasundaram. S | A study on friction stir surfacing of Al/B4C MMCs over Al substrate | International Conference on Advances in Cutting Welding and Surfacing | Coimbatore Institute of Technology, Coimbatore | August 5-7, 2015 |
2 | SabithaJannet, Koshy Mathews P, Murugan N | Prediction of wear rate of friction stir welded dissimilar aluminum alloy using artificial neural network | International Conference on Advances in Cutting, Welding and Surfacing (ICCWS 2015) | Coimbatore Institute of Technology, Coimbatore | August5-7, 2015 |
3 | D.S. Robinson Smart | Analysis of the corrosion behaviour of AA7075 with Nanoclay | International Conference on Advances in Cutting, Welding and Surfacing (ICCWS 2015) | Coimbatore Institute of Technology, Coimbatore | August 5-7, 2015 |
4 | Jawahar C.P | Production of biodiesel from animal fat | International Conferences on New Frontiers in Science, Engineering and Technology (ICNFSET 15) | AWH Engineering College Kozhikode. | October 8-9, 2015 |
5 | Suresh M,Walter Karg R, RohithRenish, ViraalNemani | Design and analysis of dynamic electromagnetic suspension system for improved vehicle stability | International Conference on Modelling Simulation and Control (ICMSC’15) | Karpagam College of Engineering, Coimbatore | October 15-16, 2015. |
6 | Rajesh Ruban S, Leo Dev Wins, David Raja Selvam J, SandeepKiran | Fabrication and characterization of in-situ formed ZrB 2 and SiC particulate reinforced A6061 matrix composites | International Conference on Modelling Simulation and Control (ICMSC’15) | Karpagam College of Engineering, Coimbatore | October 15-16, 2015. |
7 | Ramachandran R, LazarusGodson Asirvatham . Ganesan K | Thermal Gauging of Screen Wick Heat Pipe using Hybrid Nanofluid | International Conference on ‘Advances in Mechanical Engineering (ICAME-2015) | Anna University, University College of Engineering, Villupuram | October 15-16, 2015 |
8 | Sampaul P | Vibration Analysis of Aircraft Landing Gear with Smart | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) | Karpagam College of Engineering, Coimbatore | February 19-20, 2016. |
9 | Rajesh Ruban S Leo Dev Win, J Daid Raja Selvam | Effect of Dry Sliding Wear Behavior of AA6061/ZrB2/sic Hybrid Composite | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) | Karpagam College of Engineering, Coimbatore | February 19-20, 2016. |
10 | David Raja Selvam J., Robinson Smart D.S., Rajesh Ruban S | The tensile behavior of P-GTA welds obtained with indirect electric arc on compocast AA6061/Fly ash composite. | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) | Karpagam College of Engineering, Coimbatore | February 19-20, 2016. |
11 | Jayaseelan P., Christy T.V., Rajesh Ruban S., PrabhuRubesh G | Review: Reverse Dual Rotaion Friction Stir Welding Process In Al-MMCs | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2016) | Karpagam College of Engineering, Coimbatore | February 19-20, 2016. |
12 | Prabu K | Analysis of Tribological Properties of Lubricating Gear Oil with Nano Silica Particles | International Conference on Fascinating Advancement in Mechanical Engineering (FAME2016) | MEPCO Schelnk Engineering College, Sivakasi | March 18-19, 2016 |
13 | R Robinson Gnanadurai, J Pradeep Kumar | Optimization of Minimal Fluid Application Parameters during Hard Turning for Improving Cutting Performance | International Conference on Mechanical Engineering Research and Intelligence Technologies | Nehru Institute of Engineering and Technology | Coimbatore, March 30-31, 2016 . |
14 | Emerald Ninolin S., Godson Asirwatham | Thermal Performance of a compact loop heat pipe with silver water nanofluid | International Conference on Mechanical Engineering and Design | SSN College of Engineering, Chennai | April 25-26, 2016 |
15 | Mohanasundaram S | A Review on developing surface composites using friction surfacing. | International Conference on Mechanical Engineering and Design | SSN College of Engineering Chennai | April 25-26, 2016 |
16 | Leo Dev Wins | Cutting parameters optimization during hard turning of AISI H13 Tool Steel | International Conference on Innovative Approaches in Mechanical Engineering and Management Studies (IAMM 2016) | Trinity College of EngineeringTrivandrum | June 2-3 2016 |
17 | Leo Dev Wins | Optimization of fluid application parameters during hard turning of AISI H13 tool steel using minimal cutting fluid applications. | International Conference on Innovative Approaches in Mechanical Engineering and Management Studies (IAMM 2016) | Trinity College of EngineeringTrivandrum | June 2-3 2016 |
S.No | Authors' names (sequence as in paper) | Title of the Paper | Name of Conference | Venue | Date |
1 | Ganesan. G, Sekar. M | Kinematic Analysis of Rectangular Path Generating Adjustable Four-bar Linkage | International Conference on Mechanical Engineering | National Institute of Technology, Trichy | June 13-15, 2014 |
2 | Hemanth R, Prakash Sam Thomas, Suresha B, Sekar M | Effect of Short Glass Fiber and Fillers on Dry Sliding Wear Behavior of Thermoplastic Copolyester Elastomer Composites | International Conference on Current Trends in Engineering and Management (ICCTEM 2014) | Vidyavardhaka College of Engineering, Mysore | July 17-19, 2014 |
3 | Jerrin, Robinson Smart. D.S, David Raja Selvam | Machinability of Cast Al6061 Alloy Reinforced by Fly Ash Particulates | International Colloquium on Materials, Manufacturing and Metrology (ICMMM 2014) | IIT Madras, Chennai | August 8-9, 2014 |
4 | Robinson Smart. D.S, Lijin George | Experimental Investigation of Effect of Rotary Abrasive Jet Nozzle on Coating Removal Rate and Surface Finish | 3rd International Conference on Engineering and Innovative Materials (ICEIM 2014), | Kuala Lumpur , Malaysia | September 4-5, 2014 |
5 | Raja M, Hiremath G, Ramachandran K, Padmanabhan P.V.A, Thiyagarajan T.K | Prediction of Temperature and Thermal Stress in Plasma Sprayed Coatings | CoMSol Conference | Park Plaza Hotel, Bangalore | November 13-14, 2014 |
6 | Raja M | Prediction of Substrate Temperatures and Stresses during Plasma Spraying | 6th Asian Thermal Spray Conference | Hyderabad 2014 | November 24-26 |
7 | Darius Gnanaraj S | A Glimpse of Ergonomic Design of Assistive Devices for Visually Impaired | International Ergonomics Conference (HWWE2014) | Indian Institute of Technology, Guwahati | December 3-5, 2014 |
8 | Lawrance. G, Sam Paul. P., Varadarajan. A.S., Paul Praveen and Ajay Vasanth. X | Computational Analysis of Boring Tool Holder with Impact Damper | International Conference on Advances in Design and Manufacturing (ICAD&M'14) | National Institute of Technology, Trichy | December 5-7, 2014 |
9 | R. Deepak Joel Johnson, K. Leo Dev Wins, Anil Raj, B. Anuja Beatrice | Optimization of Cutting Parameters and Fluid Application Parameters during Turning of OHNS Steel | 12th Global Congress on Manufacturing and Management(GCMM 2014), | VIT University | December 8 - 10, 2014 |
10 | Ajith George Pulickal, MohanaSundaram, Vijay S.J | Metallurgical Characterization of Aluminium 6061 – Boron Carbide Composite Consumable Rod for Friction Surfacing | International conference on Advances in Materials and Materials Processing (AMMP-‘15) | Karunya University January 22-23, 2015 | January 22-23, 2015 |
11 | P. Sam Paul, A.S. Varadarajan, G. Lawrance | Effect of Material on Damping Characteristics of Impact Mass during Hard Turning | International conference on Advances in Materials and Materials Processing (AMMP-‘15) | Karunya University | January 22-23, 2015 |
12 | Robinson Gnanadurai. R, Joel M. Chandy | Predictive Modeling of Surface Roughness during Hard Turning of AISI 4340 Steel using Response Surface Methodology | International Conference on Advances in Materials and Materials Processing (AMMP -‘15), | Karunya University | January 22-23, 2015 |
13 | Lijin George, Robinson Gnanadurai. R | Prediction of Performance Parameters during Hard Turning with Minimal Fluid Application using Fuzzy Rule Based Model | International Conference on Advances in Materials and Materials Processing (AMMP - ‘15) | Karunya University | January 22-23, 2015 |
14 | Hemanth R, Suresha B, Sekar M | Abrasive Wear Behavior of Thermo Plastic Co Polyester Elastomer Composite | International Conference on Advances in Materials and Materials Processing (AMMP-‘15) | Karunya University | January 22-23, 2015 |
15 | Sudhan Raj J, Darius Gnanaraj S | A Review of Materials in Automobile Brake Friction | International Conference on Advances in Materials and Materials Processing (AMMP-‘15) | Karunya University | January 22-23, 2015 |
16 | Jerin Jose, Christy T.V | Fabrication and Metallurgical Characterization of Aluminium Composites with Agro Waste Reinforcement | International Conference on Advances in Materials and Materials Processing (AMMP-‘15) | Karunya University | January 22-23, 2015 |
17 | Saravanakumar D, Raja R | A Review on Conventional and High Speed Drilling of Polymer Matrix Composites with Reference to Delamination | International Conference on Advances in Materials and Materials Processing (AMMP-‘15) | Karunya University | January 22-23, 2015 |
18 | Jeshurun L.K, David Raja Selvcam J, Vijay S.J | Fabrication and Characterization of In-situ Formed TiC Particles on AA6061 Metal Matrix Composites | International Conference on Advances in Materials and Materials Processing | Karunya University | January 22-23, 2015 |
19 | Jawahar C.P, Saravanan R, Joan carlos Bruno, Alberto Coronas | Thermodynamic Analysis of Two Stage Triple Effect Absorption Cooling and Power Cycle | International Conference on Polygeneration (ICP 2015) | Anna University, Chennai | February 18-20, 2015 |
21 | Hemanth R, Suresha B, Sekar M | Role of filler on Mechanical Properties of Selected Thermoplastic Composites | International Conference on Advancements in Polymeric Materials | IISc Bangalore | February 20-22, 2015 |
22 | JosesJenish Smart, Antony Raja, D.S. Robinson Smart, Lindon Robert | Biodiesel Production From Waste Palm Oil By Transesterification Process | International Conference on Advanced Engineering and Technology for Sustainable Development (AETSD 2015), | Karpagam College of Engineering, Coimbatore | March 5-6, 2015 |
23 | Samuel Ratna Kumar P.S, Robinson Smart D.S | Homogeneous Dispersion of A5083/CNT Metal Matrix Composite | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015) | Karpagam College of Engineering, Coimbatore | March 5-6, 2015 |
24 | Jayaseelan. P | Study of tool profiles - Pentagon, Conical and Concave Tools in FSW | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015) | Karpagam College of Engineering, Coimbatore | March 5-6, 2015 |
25 | Jayaseelan. P | Study of Tool Materials Properties of H13, HCHCr and OHNS Process in FSW | International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015) | Karpagam College of Engineering, Coimbatore | March 5-6, 2015 |
26 | Lindon Robert Lee. C | Emission Measurements in a Lab Scale Combustion Test Facility | International Conference on Innovative Research in Engineering and Technology (ICIRET 2015) | Park College of Engineering and Technology, Coimbatore | April 9-11, 2015 |
27 | Robinson Gnanadurai. R, Joel M. Chandy | Modeling and Optimization of Surface Roughness during Hard Turning of AISI 4340 Steel using Response Surface Methodology | International Conference on Advances in Materials,Manufacturing and Applications (AMMA -15), | National Institute of Technology, Trichy | April 9-11, 2015 |
S.No | Authors' names (sequence as in paper) | Title of the Paper | Name of Conference | Venue | Date |
1 | Bobby P Paul, Darius Gnanaraj S, Chandran J | Ergonomic Design of a Scrap Compactor for Small Scale Industries | International Conference on Ergonomics | University of Malaya, Malaysia | September 3, 2013. |
2 | Jawahar C.P | Studies on Modified GAX Based Solar Operated Absorption Heat Pump Cooler for Building Heating and Cooling Applications | International Conference on Solar Air-conditioning | Bad Krozingen, Germany | September 25-27, 2013 |
3 | Sekar M | Characterization of Thermoplastic Copolyesterelastomer / Polytetraflouroethylene Blend and their Composites | International Conference on Advanced Polymeric Materials | Mahatma Gandhi University, Kottayam | October 11-13,2013 |
4 | Brusly Solomon A | Development of a Heat Flux Sensor based on Heat Pipe as Thermal Sink | International Conference on Heat Pipe | IIT Kanpur | October 13-17, 2013 |
5 | BabuRao G, Darius Gnanaraj S | Conceptual Design, Modeling and Positional Analysis of Hybrid Robot to Perform Chest Compressions during Cardiopulmonary Resuscitation | International Science Congress (ISC2013) | Karunya University, Coimbatore, | December 8- 9, 2013 |
6 | Jawahar C.P | Energy Analysis of Single and Two Stage Absorption Cooling and Power Cycles | International Conference on Advances in Energy Research | IIT Bombay | December 10-12, 2013 |
7 | Prabu K, Sekar M., | Tribological Study of Lubricating Gear Oil with Nanosized Al2O3 Additive | International Conference on Advances in Tribology (ICAT 2014) | NIT, Calicut | February 21-24, 2014. |
8 | Vijay S.J | Microstructural Characterization of Pure Copper Tubes Produced by a Novel Method Friction Stir Back Extrusion | International Conference on Advances in Manufacturing and Materials Engineering | NIT Surathkal | March 27-29, 2014 |
9 | Sam Paul P, Lawrence , Ajay Vasanth X | Analysis of Dynamic Characteristics of Boring Tool Holder | International Conference on Advances in Manufacturing and Materials Engineering | NIT Surathkal | March 27-29, 2014 |
10 | Leo Dev Wins K | Artificial Neural Network Assisted Sensor Fusion Model for Predicting Surface Roughness during Hard Turning of H13 Steel with Minimal Cutting Fluid Application | International Conference on Advances in Manufacturing and Materials Engineering | NIT Surathkal | March 27-29, 2014 |
11 | Sekar M, Prabu K, Ganesan G | A Computing Tool for Analysis of Geometrical Properties for Machining Free Form Curves | International Conference on Modeling, Optimization and Computing (ICMOC 2014) | Noorul Islam University, Nagercoil | April 10-11, 2014 |
12 | Sam Paul P, Lawrence G, Ajay Vasanth X | Computational Analysis of Boring Tool Holder with Damping Force | International Conference on Modeling, Optimization and Computing (ICMOC 2014) | Noorul Islam University, Nagercoil | April 10-11, 2014 |
K. Leo Dev Wins | Performance Evaluation of Minimal Cutting Fluid Application by Vegetable Oil based Cutting Fluid in Hard Turning of AISI 4340 Steel | International Conference on Modeling, Optimization and Computing (ICMOC 2014) | Noorul Islam University, Nagercoil | April 10-11, 2014 |
S.No | Authors' names (sequence as in paper) | Title of the Paper | Name of Conference | Venue | Date |
1 | M. Wilson Kumar, S. Darius Gnanaraj | RULA Analysis of Workers in Assembly Workstation | HWWE 2012 (Humanizing Work and Work Environment), Ergo 2012: Safety for All | G.B.Pant University, Uttrakhand | December 6-8, 2012 |
2 | Mona Sahu | Factors determining the ergonomic environment of the computers users and suggested solutions for controlling ergonomic risk factors among computer users in IT companies in India – A Review | HWWE 2012 (Humanizing Work and Work Environment), Ergo 2012: Safety for All | G.B.Pant University, Uttrakhand | December 6-8, 2012 |
3 | Dinaharan I, Vijay S.J | Effect of processing speed on microstructure and microhardness of Cu/B4C surface composite produced by friction stir processing | International Symposium for Research Scholars | Metallurgy, Materials Science & Engineering, IIT Madras | December 13-15, 2012 |
4 | Dinaharan I | Microstructure and mechanical characterization of dissimilar friction stir welded aluminum alloys | International Symposium for Research Scholars | Metallurgy, Materials Science & Engineering, IIT Madras | December 13-15, 2012 |
5 | David Raja Selvam, Robinson Smart D.S, Dinaharan I. | Production and Characterization of AA6061 Matrix Silicon Carbide and Fly Ash Reinforced Composite by Stir Casting Furnace | International Symposium for Research Scholars | Metallurgy, Materials Science & Engineering, IIT Madras | December 13-15, 2012 |
6 | Robinson Gnanadurai R | Effect of an Auxiliary Pulsing Jet of Cutting Fluid on Cutting Performance during Hard Turning with Minimal Fluid Application | 4th International & 25th All India Machine Tool Design and Research (AIMTDR) | Jadavpur University, Kolkata | December 14-16, 2012 |
7 | David Raja Selvam, Robinson Smart D.S., Dinaharan I | Synthesis and characterization of Al6061-Fly Ashp-SiCp composites by stir casting and compocasting methods | International Conference 10EMSES2012 | Sunnee Grand Convention Hall, Thailand | December 5-8, 2012 |
8 | Dinaharan I, Vijay S.J | Influence of Ceramic Particulates on Microstructure and Microhardness of Copper Surface Composites Synthesized using Friction Stir Processing | International Conference on Recent Advances in Materials Processing Technology | National Engineering College,Kovilpatti | January 7-9, 2013 |
9 | Dinaharan I, Vijay S.J | Synthesis and dry sliding wear behavior of aluminum hybrid surface composite using friction stir processing | International Conference on Recent Advances in Materials Processing Technology | National Engineering College,Kovilpatti | January 7-9, 2013 |
10 | Mahesh Prabhu R | Turning Demographic Dividend with Development Dividend | Asia Pacific Regional Conference on Youth in Politics: Policies and Programmes | Rajiv Gandhi National Institute of Youth Development, Tamil Nadu | February 26-28, 2013 |
11 | Sam Paul.P, Ajay Vasanth | Study on the influence of Electromagnetic Properties of Smart Fluid on Tool Vibrations | International Conference on Energy Efficient Technologies for Sustainability | St. Xavier’s Catholic College of Engineering, Nagercoil | April 10-12, 2013 |
12 | Nelson.R, Dinaharan I, Vijay S.J | Design and development of Fly ash reinforced aluminium matrix composite using friction stir process (FSP) | International Conference on Energy Efficient Technologies for Sustainability | St. Xavier’s Catholic College of Engineering, Nagercoil | April 10-12, 2013 |
13 | Mona Sahu | An Overview of Ergonomic Interventions Made to Improve the Occupational Health of IT Employees | RECOUP International Conference on Ergonomics | RECOUP Bangalore | May 4-5, 2013 |